Best practices deployment CD to the internet non-connected PC

Similar Questions

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• (Best practices) How to store the adjustment curve values?

  I got two sets of data, Xreal and Xobserved, abbreviated Xr and Xo. Xreal is a data set that contains the values of sensor from a reliable source (it's a pain to collect data for), and Xobserved is a set of data containing the values from a less reliable source, but much less maintenance, sensor. I'll create a VI that receives the entry of these two sources of data, stores it in a database (text file or csv) and crosses some estimators of this database. The output of the VI will be best approximation of linear adjustment (using regression, not the Xreal) of the input value of Xobserved.

  What are best practices for storage Xreal and Xobserved? In addition, I'm not too known using best VI made, take CSV files for entry? How would format it best?

  '

  Keep things simple.  Convert the table to CSV file and write to a text file.  See attached example.

• NTFS file cluster best practice deployment of Windows server on vSphere 5.1?

  What are best practices, VMware or Microsoft that I need to know to make sure the server that I created 2 x Windows Server 2008 SP2 Enterprise MSCS of NTFS file (active / passive Cluster) can operate reliably to be accessed by more than 1,000 people?

  The underlying data disk is RDM because I need to replicate the LUNS in the DR site using the tool table of SANCopy.

  • SCSI controller LSI Logic SAS in Paravirtual changed

  Not really an option... This is not supported by VMware in an MSCS configuration...

  / Rubeck

• Recommendations or best practices around change of the audio data on a network share?

  I have several users editing audio located on the same network share. They are always complaining about the performance.  Is it a best practice to edit audio located on the network?  I see so many issues (latency time, possible corruption, etc.) with that from the computer SCIENCE point of view, but I would like the opinion of those more familiar with the application and its best practices.  Thanks in advance.

  It's crazy! So that any audio to be edited with any degree of speed and security, it must be downloaded to a local computer, edited on that, and then the final result re-recorded on the network.

  You might as well do this anyway - at the time wherever you make a change, you store a local version of the file temp on the editing machine, and it has real save, or save as who turned to the network drive. Also, you would be working on a copy, the original is still available in the case of the vis - is up, and would not be the case if you edit the original files directly on the network, so it is intrinsically safer.

• Best practices for moving to the 1 of 2 VMDK to different data store

  I have several virtual machines who commit a good amount of data on a daily basis.  These virtual machines have two VMDK; one where the operating system and that where data is committed to.  Virtual machines are currently configured to store in the same data store.  There is a growing need to increase the size of the VMDK where data are stored, and so I would like these put special in a separate data store.  What is the best practice to take an existing virtual computer and moving just a VMDK in another data store?

  If you want to split the vmdks (HDDs) on separate data warehouses, just use Storage vMotion and the "Advanced" option

• best practices or framework for the design of OSB(11g) process

  Hi all
  
  We worked in oracle 10g, now in the new project we will use Soa suite 11 g. For 10g, we have designed our services very similar to the framework of AIA. But since the introduction of OSB 11 g we are not able to exactly fit the frame of the here AIA because the BSO has a different structure of the BSE.
  
  Can anyone suggest some design framework for the design of processes in OSB or 11g SOA Suite or best practices?

  http://download.Oracle.com/docs/CD/E12839_01/integration.1111/e10223/04_osb.htm

  http://www.Oracle.com/technology/products/integration/service-bus/index.html

  Kind regards
  Anuj

• ITunes 12.3.2.35 says it can not connect to the internet, no connection, but my internet works fine.  I installed Windows 7.  Any help?

  I am using windows 7 on my pc.  I just installed the new Itunes, 12.3.2.35, and it does not connect to the internet.  I ran diagnostics and it said that the only test that failed was "secure link to iTunes Store failed.  What could be the problem?

  Thanks for any help.

  Yes, I had the same issue and have also windows 7. Here's what I did to remedy.

  1. go to your Start menu and in the search the bottom type in cmd menu.

  2. right click on cmd at the top of the menu, and then click "Run as Administrator". A black box should appear.

  3. type netsh winsock reset. It should invite you to restart your computer.

  4 restart your computer and then open itunes again.

  I did and now my itunes is on the rise and running and connection to the store. I hope this helps!

• Cannot get my Presario C700 to connect to the internet only connects local

  I can't get my presario c700 to connect to the internet. get only the local connection. I tried using the website of compaq, microsoft, and atheros site. Nothing works. I downloaded a bunch of different drivers. I found several forums with links to the drivers who have helped, but when I click on them they cannot be found. Extremely frustrated. All my other devices connect completely so I know it isn't my router.

  Compaq Presario C700

  Atheros AR5007

  Hello:

  This driver should take care of this problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Unable to connect to the Internet after connecting to a VPN server.

  As soon as I connect to the VPN, I can't access the Web or e-mail.

  An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.

  Issues related to the:

  1. The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
  2. If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?

  Thank you.

  Realize that the VPN is intended to establish a secure connection to a remote network via a public internet.  Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet.  If "split tunneling" VPN server controls is allowed on a client computer.  If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box.  For more information:

  "Split Tunneling for concurrent access to the Internet and an Intranet"
    <>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >

  HTH,
  JW

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• I can't connect to the internet. "Connectivity limited or not. Seems to be the Winsock error. __

  Symptoms

  • Internet connection icon indicates: "connectivity limited or not.
  • When I try to run Internet explorer, I get "Internet Explorer cannot display webpage".
  • When I run "Diagnose connection problems" I get the following Diagnostic log indicating a Winsock error:

  • Diagnosis of last run time: 21/11/09 10:31:47

    WinSock diagnostic

    WinSock status Info Error attmpting to validate the Winsock base providers: 193 error Not all base service provider entries could be found in the winsock catalog. A reboot is required. Info Redirect the user to support call

    Diagnosis of network adapter

    Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Local Area Connection 3, device = Broadcom 440 x 10/100 Integrated Controller, MediaType = LAN, type = LAN Info Network connection: name = wireless network connection, Device = Intel (R) PRO/Wireless 3945ABG Network Connection, MediaType = LAN, type = Wireless Info Network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394 Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

    HTTP, HTTPS, FTP Diagnostic

    HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  • Have tried resetting winsock.
  • No problem with wireless router - it works on other computers.

  Help!  How to fix it.

  Ice22Man,

  To reset the Winsock settings automatically, click the fix it button or link. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  Solve this problem 
  
  Microsoft Fix it 50203

  Note this wizard may be in English only; However, the automatic fix also works for other language versions of Windows.
  Note if you are not on the computer that has the problem, save the fix it solution to a flash drive or a CD and then run it on the computer with the problem.

  To manually reset Winsock for Windows Vista, follow these steps:

  1. Click
  

  type cmd in the Search box, right-click cmd.exe, click run as administrator, and press continue.

• Type netsh winsock reset at the command prompt and press ENTER.

  Note If the command is typed correctly, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt. Proceed to step 3.

• Type exit and press ENTER.
For more information about resetting Winsock, see the following Microsoft KB article: http://support.microsoft.com/kb/811259
Hope that helps!

Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?