Best way to keep this Center everything using a camera?

Similar Questions

• Best way to film this scene, stitch together plates or green screen?

  I have a call where I walk past a player with him framed on the right of the screen, ' actor A. ' then on the shoulder 'Actor A' (on the left side of the screen) another character is in sight, "actor B." at the end of shooting the camera move to stop and I want at the speed of the actor 'A' of the ramp so that it revolves around very quickly While the 'B' actor maintains a normal speed (which is him walking toward the camera as well). Is the best way to do this shoot with two plates separate and assemble them (if if, what is the best way to assemble the shots)? Or is - this green screen actor 'A' or 'B' and add them in? Remember, the camera moves to the rear while the actor 'A' heading, when moving player 'B' is also in the shot. Ramp speed of the actor 'A' occurs once it stops (it will whisk around extremely fast), how the camera will also be stopped.

  You have a few options. Usually, I start a VFX shot by the thought of the movement of the camera. If I move the camera what are the problems that will result?

  According to your description, you have a dolly with two actors. Tracks camera, the first actor as the second player enters the scene, then the unit stops and the second actor continues to his notes at normal speed while the first actor is accelerating. Two shooting plates will give control the moment where the first actor, but, in view of the camera move, requires you to simulate accurately the moment where two follow-up plans so the point of view between actors is consistent. It doesn't matter if the photos are on a green background. For the view between the two actors to match the camera moves must be identical to the camera angle and the speed of follow up.

  If, however, you shoot all the action in a single pass while you can use rotoscoping to separate into two pieces shooting where the camera stops moving and then adjust the time where the first actor. This works easily if you make sure that you don't move the camera at all once the track ends.

  If the players do not overlap so the second option is a piece of cake because your roto can be a very simple rough mask. If the players overlap in the framework then your roto work will have to be very precise when the players overlap, and you may need to perform a few background replacement to fill in the holes.

  If you decide to do with two plates, then you will probably need to track movement. stabilisation and re-synchronization of two shots to make them at the height. If the camera is moving when you accelerate the first actor, you will have to keep track of movement.

  A final option is to pull the first actor on a green screen and the second player as a bottom plate and then follow and stabilize the two shots to try to combine them. Here again, if the speed and angle of the two plans that you combine are not identical or at least nearby enough that you can easily fix them you'll be in a lot of tweaking to than the shots work.

  If it were my project, I shoot the two actors in a single plug and then divided take it there where should be the first actor have the speed change and make a few roto work. That seems to be the most straightforward approach.

• Best way to archive projects for future use

  I use Adobe Premiere Pro CS4, but this is a more generic question.  I shoot the videos that people want to save for a long time.  I burn my DVD projects (or if the client does not mind the cost of Blue-ray discs).  DVD can be destroyed, lost, will wear out.  What is the best way to keep these memories?  I know that some people charge the customer and use an external hard drive dedicated for each project.  Which technique is not too expensive, but it will last the longest?

  Thank you

  Lisa

  I think most use the method of the hard disk or tape.  The stuff (dvd, Blue ray) 'See only' cant really be used for editing "again" without loss of quality because of the compression... so the HD or the band allows you to save the project and less compressed (perhaps "Lossless" codec)... that can be edited later.

  If you just want to record the DVD "for life" just make copies of the DVD and keep them nicely...

• What is the best way to read this binary file?

  I wrote a program that acquires data from a card DAQmx and he writes on a binary file (attached file and photo). The data I'm acquisition comes 2.5ms, 8-channel / s for at least 5 seconds. What is the best way to read this binary file, knowing that:

  -I'll need it also on the graphic (after acquisition)

  -J' I need also to see these values and use them later in Matlab.

  I tried the 'chain of array to worksheet', but LabView goes out of memory (even if I don't use all 8 channels, but only 1).

  LabView 8.6

  I think that access to data is just as fast, what happens to a TDMS file which is an index generated in the TDMS file that says 'the byte positions xxxx data written yyyy' which is the only overload for TDMS files as far as I know.

  We never had issues with data storage. Data acquisition, analysis and storage with > 500 kech. / s, the questions you get are normally most of the time a result of bad programming styles.

  Tone

• I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  I have an After Effects project and I want to re-do edge animate. What is the best way work for this?

  Hello

  Sorry, but you will probably need to rebuild everything in Animate. Although their timelines are similar in some ways, there is no interoperability between After Effects and animate dashboard.

  Kind regards

  Joe

• How the best way to keep the information user´s?

  Hello people.
  In my application, I use the method getDBTransaction () .getSession (). getUserData() to store user information, such as the ID, user name, etc...
  However when my application is used by more than 20 users. Application loses the information in session variables very often. In most cases the user session is lost in less than 2 minutes of use. Some entities in my application using this information to fuel elements of the entities which are necessary for the table, so that the application generates errors like Houston-27014 and Houston-25017.
  I wonder what the best way to store this information so that I can use the methods of the data model and user interface methods.
  
  Thank you once again.
  
  Willian

  What is described in the [docs here: http://download.oracle.com/docs/cd/E15051_01/web.1111/b31974/bcstatemgmt.htm#sm0495]

  Timo

• I'm moving my files to workspaces to cloud.adobe.  What is the best way to achieve this?

  I'm moving my files to workspaces to cloud.adobe.  What is the best way to achieve this?

  Hi Traci,

  So big that you get ready for the transition to cloud.acrobat.com! Please see that the specified item was not found. For more detailed information on downloading your files.

  When you open a session workspaces, however, you will see a big red box at the bottom left. Click this box, and your files will be packed to the top for you. You will receive an email with the instructions when the packaged files are ready for you.

  Best,

  Sara

• I'll do a clean install on a blank hard drive upgrade but want to keep my Firefox settings - what is the best way to do this?

  I'll do an upgrade from Windows XP to Windows 7. I will be installing Windows 7 on a new empty hard drive. I want to keep my bookmarks Firefox and Ad Ons. What is the best way to do it. Thank you for your help.

  Hello

  The best thing for you to do is to make a backup of your Firefox profile. It is a folder that stores bookmarks and Add-ons that you can then add to the reinstalled Firefox on your new operating system.

  Learn you more about the Firefox profile folder, how to backup and restore, here.

  I hope this helps, but if not, please come back here and we can look at in another option for you.

• I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

  I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

  If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

• 10 workstation online best way to keep the host offline and guests?

  Newbie question: Workstation 10 - have a host Windows 7 Ultimate x 64, several guests Linux Mint 17.3 (KDE). The machine is portable i7 with 16 GB of RAM. The network is wireless only (cannot use cable in current situation).

  I would keep the Windows 7 host permanently out of the network. The guests are online and used for web and similar access. What would be the best way to set up on the side of the network, assuming that it can be done?

  Thanks a lot for your help!

  PH

  Hello

  Well this is... depends on what you intend to 'offline' for the customer.

  If you are planning that the guests to be accessible from the outside (I mean through wifi to your host), the host has (?) to be somehow connected, so online?

  There is perhaps a way to restrict connections from hosts on the outside... so that web page in emails do not work, but the host is will still be able to receive a part of traffic in my humble OPINION.

  With my knowledge and my experience, I know:

  -You can connect a guest with his * own * USB hardware. I mean you can disconnect from host a WiFi USB (or USB ethernet adapt) card and connect it to a given host. So the host could be offline (no wifi, no ethernet), but the guest can be connected through the material, it will set up.

  -guests could communicate with each other via a 'host-only' adapter or a bridge (as your ethernet NiC).

  -When the ethernet NiC host is physically connected (and guests on her bridge), communication between clients is broken... but a software solution is to add a dummy loopback adapter to simulates network card is connected. In this used during travels by train, without ethernet or wifi, to avoid changing the working configuration of the guests in bridge on the ethernet adapter that I used to have to work! :-) Modifying simply physical WMnet0 (eg) to ethernet virtual network configuration microsoft Loopback to tour.

  Took the 3 above stated and your configuration:

  -1 host must be offline

  -several guests that should be online

  -ethernet to the home not connected

  You can try to:

  -installation of a map of looping to the host (http://www.groovypost.com/howto/microsoft/install-a-loopback-adapter-in-windows-7/ )

  -connect and configure a physical map of wifi USB to one of your comments (comments should have a virtual USB controller installed).

  -share your comments above WiFi connection.

  -Configure the * other * invited to use the above share under their gateway address (and DNS I guess?) and set up their virtual connection through the loop (you may need to manually change the address/subnet of the closure to match that of the shared connection).

  It's an idea to dig.

  Own a unique login prompt works for sure, but use it as a gateway to the other guests might be the tricky part (at least for me)!

  My 2 cents! ;-)

  Kind regards.

• Best way to keep 2 VMs on 2 different Macs in sync?

  Hello

  I have a Macbook laptop, Leopard, who inherited an iMac under Tiger, all data and applications running. I just tried to resume the VM on the Macbook & he warns against possible instability if I continue. -He looks so much like that I have to create a virtual machine on the Macbook & then import or attach files hard of the orginal VM on the iMac. Will this work? & what is the best way to then maintain the virtual machines synchronized? (two-way changes possible). Will I have to use the tools of command line or that can do everything in the GUI? Oh - the virtual machine is Win2k Pro, BTW

  Thank you

  GAM

  (1) If you (Mac) sync s/w, who has worked at the block level (IE, avoiding mega-file copies), why don't keep you them synchronized like that?

  It works (assuming that you do not synchronize when the virtual machine is running, and of course). My recommendation against the clock was on the assumption that you do not have block-level backup software and would therefore have to copy everything, which is probably too big to be useful.

  (2) are violate you licensing agreements if you have the exact same virtual machine on 2 different Macs (continue as above) & never run them at the same time?

  WARNING: I am not a lawyer, nor I speak on behalf of someone else. I think it is an acceptable thing to do. The essential fact is no more than a version is never used both - you may think that moving the virtual machine of it around (which I think is undoubtedly very well) and make a backup on another computer (which I think is also unquestionably very well). Synchronization of two guests and never use a version of the virtual machine, you're just swapping which copy the backup and that is in use.

• Best way to implement this provision?

  I have this design which is currently in the form of Flash that I would do it again in html. I try to reproduce the same exact design with the following restrictions:

  -I want the design to stay centered horizontally, regardless of the size of the browser window.

  -I don't want no scrollbars on the browser window.

  This design was initially conducted during the years there are html and I have achieved this goal by using nested framesets. Each horizontal section of the design was in a frame. Something that does not look was when making a selection (on the numeric keypad) the image page loading in the white flash image section front of load the image page. I never found a way to avoid this. I certainly don't want that. In other words, each image is selected the background in the image section should stay black.

  Any suggestions for the way better, the easiest way to achieve the final result more transparent? I guess that run html and css standards allow a better way to do this? I intend to use Highslide to zoom in on the image.

  Thank you for any input!

  

  This is called a Flash of unstyled content (FOUC) to edit pages.  What you need is a jQuery (JavaScript) solution that keeps everything on the same page, so there is no FOUC.

  I also recommend jQuery Fancybox2 for window modal/Lightbox effect.  See examples below.

  http://fancyapps.com/FancyBox/

  Nancy O.

• Best way to keep a list and a synchronized SimpleListProperty

  Hello
  What is the best way to (i. e. - for the moment work) to keep my 'plain' list and JFX SimpleListPropertry synchronized? Currently, I think something like that, but I'm sure that there is a better way:

  public class MyEntity {
      private List<String> myList=new ArrayList<>();
  
      // getters and setters
      public List<String> getMyList() {
          return myList;
      }
      public void setMyList(List<String> myList) {
          this.myList = myList;
      } 
  }
  
  
  
  
  
  public class MyEntityJFX {
      private MyEntity backer=new MyEntity();
      private SimpleListProperty<String> myList=new SimpleListProperty<>(FXCollections.observableList(new ArrayList<String>()));
  
      
      
      
      //Constructors
      public MyEntityJFX() {
          this.bindToBacker();
      }
  
      public MyEntityJFX(MyEntity backer) {
          
          //backer attribute checking logic ommited... 
          this.backer=backer;
          
          //filling the SimpleListProperty
          if(backer.getMyList()!=null && !backer.getMyList().isEmpty())
          {
              for(String s : backer.getMyList())
              {
                  this.myList.add(s);
              }
          }
          this.bindToBacker();
      }
      
      
      
      
      //Service methods
      /**
       * Synchronizes JFX properties' values with backer's
       */
      private void bindToBacker()
      {
          this.myList.addListener(new ListChangeListener<Object>() {
  
              @Override
              public void onChanged(Change<? extends Object> c) {
                  //not sure if this is a good approach
                  //and what exactly to do here
              }
          });
      }
      
      
      
      
      //Getters and Setters
      public SimpleListProperty<String> myListProperty()
      {
          return this.myList;
      }
      
      public final List<String> getMyList()
      {
          return this.myList.get();
      }
      
      public final void setMyList(List<String>myList)
      {
          //don't like this at all
          this.myList.clear();
          if(!myList.isEmpty())
          {
              for(String s : myList)
              {
                  this.myList.add(s);
              }
          }
      }
  }

  Use Bindings.bindContent (list, observableList)

• What is the best way to keep the high resolution when recording "for the web".

  the files that I save to the web so I can get them in jpg (or gif) are coming very pixelated.  That's when I print the image.

  What is the best way to save for the web, an image and keep the good resolution.

  using a business card template.  template Avery will allow me to attach images I want to project.  to do this...  I 'get file computer' and it deletes the image in but real little... then you are supposed to expand on your work as you want.  Well, when I enlarge this image file, it gets pixelated bad.  I think it's the way that I am saving it.  I do not adjust anything when I save.  Maybe I should.  This is where I need advice.

  That's what avery model notes on the images, I am allowed to use - when downloading the image, the maximum allowed size is 4 MB.  You can download the JPG and PNG RGB or CMYK images.  so when you recommend things, can you please take this into account

  Thanks for oyur times.

  Aida,.

  When you register with the default template using save for web, it's usually a setting very low.

  While in the registration window, you can set the size in pixels of the image you want with the quality and the resolution too.

  Refer to video tv.adobe.com save for web or Adobe Help file for detailed instructions.

  Florian

• Best way to make this step motor control system

  The goal of my project is to have real-time data collected by a controller of Sir 158u Dataq a stepper motor.  I grappler planned on executing it with the basic stamp, but I realize that's not possible.  I have a stepper motor and a L293DNE driver.  I'll be permanently registration of data with the dataq, the form of volts and want these values to determine how the engine works.  For example, if the voltage is 0-3 volts, I want it running clockwise, 3-5 volts not turns not, and 5-8 Volt turn clockwise.

  I tried to understand this last week, searching through discussions with basic stamp, matlab and labview now.

  Is there an easy way to do this? or easier way that I'm trying to understand?

  Any help would be greatly appreciated!

  Thanks in advance.

  -Nick

  Nick,

  What I was describing, this is how you configure the motor controller to accept PWM of LabVIEW and mode locked anti-phase so you can control the direction of the motor. Much on the part of LabVIEW depends on the acquisition of data you use. For example the acquisition of your data doesn't have a counter which can generate a PWM? I did some checking everything on time and the acquisition of your data is not made by National Instruments and I couldn't locate the native LabVIEW drivers. I did however go to the MFG Dataq 158u site and found that they do not have drivers LabVIEW BUT their software (SW) should run in the background. Dataq 158u website also has a help forum, I suggest you start to understand the capacity of the 158u Dataq. Also it seems that you are not familiar with LabVIEW, until you can take on a project like this, you have to start with the LabVIEW Basics, learn how to manage the tables so you can store your results of EDA and records the use of loops and timing and movement.  NOR has a basic training FREE as the intrudction 6hr to LabVIEW, I would like to start their. Oh, and in your OP (original post) you doubted the Basic Stamp could do that, I do this type of control using the Atmel microcontrollers all the time, I'm sure that the stamp eaisily could do. Download right on one of their forums for more information. Oh and to answer your question a UPS is an IC that reverses the input signal, which you would end upward with the direction of you pines motor controller is PWM on a spindle and 180Deg off phase PWM, on the other hand.

  Alan