BG sound with the out of control in ft3/min

Similar Questions

• Problem with the task of control of model code - execution instance remains open

  Hi Experts
  
  We have some model mappings, for which we use some similar code with the model code BUILT_IN_CT model. Mappings to run successfully, but the task of control of model code seems to remain open. It's the same thing, even if I use the code model of control by default BUILT_IN_CT/CCT_ORACLE.
  
  To see if the control task remains open, I run the script...\dbhome\owb\rtp\sql\list_requests.sql, and I get the following output:
  
  ====================
  EXECUTIONS
  ====================
  ID of the audit. State of... Name... Date of... Owner...
  16_FLOW_CONTROL LOAN 260573 19 APRIL 11 10:15:16 OWBSYS
  
  As a solution to the problem, we managed to implement a custom task jdbc, in which we are to pick up instances of this task and then close them using the owbsys.wb_rt_script_util.deactivate_execution procedure.
  
  Anyone know the reason for this problem and if there is a solution for it, other then to implement a custom task to close the open instances?
  
  We use OWB 11 GR 2 on Windows.
  
  THX
  Your help will be much appreciated

  Yes, I see now the verification element hanging out in OWB, this looks like a bug in the OWB audit management, it should not be suspended. I don't think impact on behavior, he is a piece of dangling audit data that should not exist. You can raise a bug/SR?

  See you soon
  David

• With the help of Control Source of Robo - project record

  There are two writers working on an HTML project, both using Source control explore 3.8 with RoboHelp 6. I was the creator of the project and added to Source code control.
  
  When another writer click on the button "save all", it takes 20-30 minutes until registration ends (when the hourglass disappears), allowing him to work again in the project.
  
  I have no problem with the backup. The Source code control database is on a separate server from one of our machines.
  
  We are new to this workflow, so it could very well be something done out of ignorance, but mine works fine and I installed the software on the other machine and has helped put in place under Version control.
  
  In the Task Manager CPU usage is up with the RoboHTML process using about 95 percent. I don't see anything different in his installation/configuration that should cause this. All suggestions, ideas, would be most appreciated.

  A good starting point would be to have your colleague to rebuild his CPD record. (In this order: make a backup copy of the project, check all of the files, close the project, delete the PCD file, and then reopen the project.)

  RoboHelp will rebuild the cpd file when it opens the project. Depending on the size of the project, it can go fast (almost imperceptible) to VERY slow (hours). Spin for as long as it takes this time - the following instances of the opening of the project should be normal.

  HTH,
  G

• I have lost sound with the last update, how can I get it back?

  Works with Windows Vista home Premium. All worked before the 13.0.1 firefox update. Other works sound but internet sound disappeared.

  Hi tazman12, when you say "up to date" not average you cancelled? There is a problem with the latest versions.

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Sound with the media problems

  My sound stopped working. I checked the drivers and they are all to date. I can't seem to understand the problem and the most annoying part is that all the system sounds like the start up, windows prompt sounds and basic as chest sounds games still work. No matter what noise of internet windows media player do not a sound. When I try to play a music file in windows media player, I get and error COOD11BA that says "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  NAAN

  Your driver can be present but corrupt

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• "Question of possible priority with the operator to control flow.

  Hi guys

  I have the following problem:

  Yesterday, I did an upgrade from debian wheezy distribution Debian jessie.

  Since then, I had a problem with a plugin which I use for Icinga a surveillance system.

  When I run it, I got the error that there is a 'undefined subroutine.

  I read on google that I can fix it, with resettlement vsphere SDK, but the installation blocked to "CPAN is to download and install the pre-requisites Perl module"SOAP::Lite.

  Can I skip this step with Ctrl + C, and at the end he says «this Setup program has installed successfully...» ».

  
  

  But when I run the Plugin I get the error message 'problem priority Possible with operator control in the /usr/share/perl/5.20/VMware/VICommon.pm line flow 2147' and the whole stucks plugin.

  I tried the next step that I found in this forum and the error message does not appear, but the stucks again plugin...

  Re: VMware-vSphere-Perl-SDK-5.5.0-1384587 broke up with perl 5.20

  I also have Perl 5.20.2...

  Can you guys help me?

  Vinzenz

  OK I could fix it...

  I changed the line 2147

  "

  return (meaning $user_agent-> cookie_jar and)

  $user_agent->-> as_string cookie_jar don't ");

  "

  And this time I waited for a long time and I get an error message that there is a problem with the SOAP.

  The solution was to downgrade Net-HTTP and libwww-perl with the following commands:

  Perl - MCPAN-e shell

  o conf urllist push http://backpan.perl.org

  install GAAS/Net-HTTP-6.03.tar.gz

  install www-perl-6.03-tar.gz GAAS/lib

  The second command loads the old versions of the urllist.

  Thx for your help and I hope that I can help others with the same problem.

  Vinzenz

• Trouble with the outer glow

  I'm trying to recreate the logo "dark side" of Star Wars: The Old Republic as a fun side project, but I have encountered some problems. I use no effects of light for many in my industry, if it's become a bit of a learning experience for me! I started by creating the shape with the pen tool and the I made to be as accurate as possible. The I tried to give him the outter shine? I thought it would be so simple right? Now I'm on the forums asking for help.

  This is as far as I got.

  

  That's what I'm trying to replicate. Any tips? Ideas? Any help would be greatly appreciated!

  First, please provide a glimpse.

  Now, instead of outer glow, try adding a line of thickred in the appearance Panel, then application of a Gaussian blur to the outline in the menu effects. Note that the stroke is below filling.

  

• .png transparency problem with the underlying layer control

  I have an opaque orange rectangle with a clear square cut uneven in it through which I display a slideshow (slide show Image Spry) and it works fine except that I can't control the slide show with my cursor. I can control the slide show very well when it is above the rectangle, but I want the cutting action as a frame on the top of the slide show.

  Transparency is the .png, similar to a sheet of glass? If so I can access the controller somehow through the "glass" with some added code?

  Hello

  You cannot place a 'sex' on the slideshow, as this 'layer', (what is an ap div?) then "will be the focus" above the slideshow and anything under this, (the slide show controls) will be selectable.

  You can program your own events in javascript handlers to control the slide show, but it will require you to have a reasonable understanding of javascript programming.

  PZ

• Download all packages or just the sound with the latest dates?

  Hi, maybe it's a stupid question, but when you go to the drivers and it shows are all pilots who are selected to download to your laptop you wanted to install only those with the latest dates or each package that is there?

  Hello:

  You must install the driver with the most recent date if you are sure this is a driver that you are interested in.

• Problems with the buttons that control the volume

  Hello everyone I hope you can help me. I had to reinstall the system on my laptop, everything is ok except for a problem, the software that controls the volume buttons are not displayed. If the work on screen, but I can't see if the volume or bass.
  Could you tell me what might happen. Thanks and forgive the inconvenience.

  Hi all I have solved the problem, as I'd mentioned the error is when you install the drivers and the order in which they are installed.

  First of all, install the file shortcut (8jvu20ww.exe)
  Once installed, you will be prompted to restart the system. Do not.
  Then install (g1ku20ww.exe) power management.
  Reinicir system and the problem is solved.
  A welcome message.

• Problems with the Out-of-Band updates

  I am running Dell v2.0 OME.  Everything works great including the updates via OMSA. However, the updates made via the iDRAC connections fail every time.

  I could say I tried everything, but I thought someone might help me with troubleshooting whole again in case I missed something or did something wrong.

  The connections of the DRAC live on a different subnet, but there is no firewall between these two networks.  Only a router that routes traffic between the two.  As I type this I came with some other ideas, but if you have something to offer that would be great.

  Here is the error I get trying to deploy the updates.

  Results:
  Download the packages.
  The call of method InstallFromUri to download packages to the iDRAC
  Download package: BIOS_V7P04_WN64_2.2.3.EXE on iDRAC
  Download the package has started successfully and the Job ID is JID_121890750543
  The URI given to iDRAC to download it from: http://[serverip]:1278/install_packages/Packages/BIOS_V7P04_WN64_2.2.3.EXE

  Checking the status on the following tasks: JID_121890750543
  The JOBID JID_121890750543 failed with the following message is displayed:
  A package of updated network file transfer has failed.
  MessageID: RED051

  Download error occurred.
  Package BIOS_V7P04_WN64_2.2.3.EXE didn't upload on the target device. Update failed.
  The task of software update failed.

  Thank you

  Well the call with Dell has not helped, but eventually I was able to understand it.  I learned that during an attempted search on a (executable) package for download, IIS returns a 404 error.

  An example URL is http://[nameofserver]:1278/install_packages/Packages/SAS-RAID_Firmware_C3X7D_WN32_12.10.6-0001_a12.exe

  I had to open the Web.config for the bulk of the site and adds the following snippey inside the section.

  
          
  

  The site's web.config file is located in C:\Program Files\Dell\SysMgt\Essentials\wwwroot\Essentials\.

  Once the module was in place, I was able to navigate to any package and it would prompt me to download it. From there, I tested the updates again on the ESXi hosts and all is well again. I hope that this little information helps someone else!

  Thanks again for everyone's help.

• Satellite P100-238: stuttering graphics and sound with the game

  Hello

  A few days ago, I bought a P100-238 both for business and holiday makers with leisure activities include mainly games, I thought this would be a great opportunity to take the next level and buy something powerful with Vista on board... IM starting to think ive made a big mistake. First impressions of the laptop were great (and vista although it is a little welfare State is very good).

  The problems started when I installed a few games (Please take into account, it is a system of 4 GB with 2 gig of ram and a Geforce 7900 gs graphics card, it should theoretically be ideal). The first few games I tried was wonderful... If you stopped, but as soon as you moved (in the game) about every 3 seconds the games would stutter to stop, then start again... every 3 seconds. Okay, I need the drivers, so I jumped on nvidia and tried installing different drivers to see none to work with laptops. In fact whenever I tried to install I got the message that or the other driver is up-to-date or that I'm «not equipped for vista» Anyway to cut a long story short, I discovered www.laptopvideo2go.com when I discovered that Nvidia does not support drivers for laptops (even once cut a long and painful story short) so I used it recommended modded INF files as well as various pilots until the later. Unfortunately I still had the same problem, someone recommended it can become again the sound driver so I tried that no different.

  After further investigation on various forums, it seems im not the only person who knows these probems. On these boards, I noticed that someone had the sound and graphics too jerky and sent it for repair to have the CPU, motherboard, ram etc replaced until they found the error on the HARD drive and once replacement he was fine.

  Using this info and finally think I had put inside of it I took my laptop to the store and he was replacing, ultimately reinstalling everything and lift a game and running... guess what... still the same.
  This is totally unacceptable.
  How do you market a product as games and entertainment laptop when she's obviously serious faults preventing these activities.

  Anyone here have the solution? Also, I should mention that this problem persists when the resolution and graphic details fell to a minimum in the game.

  Thank you
  Darren

  [Edited by: admin]

  It's not a hardware problem or a laptop, but Windows Vista!
  Check out the other discussions in forum games on Vista performance with games!
  Some people have installed XP and it s running like in a dream!

  It seems that we have to wait for a first Microsoft Vista SP1 or certain patches.
  Maybe then the Vista will be more compatible with all these games on the market!

• My photos app does not sound with the video export

  Then. Im trying to drag my videos, Photos and on my desk. For some reason any after you copy its reading of the video, but I don't get all the sounds?

  If I play the video in Photos, sound works fine... Any ideas?

  Do not hang out, but use the ➙ unmodified export Original for 1 video file menu option.  See if that you will get a playable file.

  

  

• With the help of control and simulation module; e to get the time the MISO model Manager

  Hello

  Please can someone show me how to find the response time of the system below using the module control and simulation?

  (y (k) - 1,7407 y (k-1) + 0.6236y (k-2) + 0.1782y (k-3)) =-0.0932 u(k-1) + e (k)

  where there is out, u came and e is a white noise.

  I tried to enter the CD construct MIMO model, then connect it to CD response time. * s vi.

  But what I really need to enter the model coeffs every time? and I still don't see the answer!

  Help, please...

  Kind regards

  ruser

  Hello

  you have the correct image... I used the Toolbox ID sys (Assistant)... to estimate the system model...

  and I tried all week last get the model of my system in labview for use the control on this module.

  Alhamdulillah...

  I ended up doing... I saved the template to a file from the Toolbox id sys... (my model is in discrete form) then I loaded it in labview using load file pattern...

  so now I in labview...

  now for control parts... ..

  Thank you again...

  ruser.