HP F2280: no scan after installation software

Similar Questions

• My PSC 1210 all-in-one not Scan after the recent software update

  There is no if long software update asked me to install the last change of HP software. Which is curious, because when I look in the download, the last of them for OS10.6 section, which I run, was released in 2009.

  Before, I scanned successfully by using the Print & Fax system preferences.

  When I did it today, thogh, after choosing the option to Scan and then open Scanner, I would get the message that there is 'no scanner not selected', although HP psc 1200 series at the top of the screen. I tried scanning several times and got the same result every time.

  What can I do to get this working again?

  Hmmm, that seems strange that you will receive an update for a PSC 1210, because I do not think that there has been updates this software for years.

  Have you tried to uninstall the driver and then reinstall?

  You can find the instructions to uninstall here: http://support.hp.com/us-en/document/c02259020

  And then re-install the driver by clicking on: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c02259020&lc=en&os=219&product=90764&sw_lang=

  Click on drivers & downloads and select your operating system (Mac OS X) from the drop-down list and click Next.  Expand the sign next to the driver - product Installation software (8) + and then download/install the driver for 10.6.

• Satellite P100 - problem during a restart after a software installation

  Hello

  I met a problem when I restart after the installation of software. Stay black screen and windows XP does not restart. The first solution is to wait a few minutes and then I can restart normally.

  Could you please give me a reason and a solution to restart paques1861 after installation?

  Thank you very much.

  Hello

  I'm afraid I n t m understand your problem
  What the installation of the software do you mean?

  Did you use a Toshiba restore CD?
  Please explain your problem a bit more

• Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  Just installed windows 7 on a hpp6130y that I bought in August came with free Windows 7 upgrade after installation I lost microsoft works and other software that has been pre loaded on pc.

  How your post is related to Windows Update (compared to the Windows upgrade)?

  Contact HP support.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I installed the software after installation my computer restarts automatically at the start with on screen start

  I installed the software after installation my computer restarts automatically at the start with on screen start

  Hello

  ·         Do you have what software installed?

  ·         You get the error message?

  Step 1: Try the following steps to disable the automatic restart in case of system error:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) select turn off automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  (c) Please provide the error if you get one.

  Step 2: Check if you are able to start the computer in safe mode.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "Bad Gateway" EA4500 try to access the router after installation the software upgrade

  Hello, I have recently updated my installation software to Version 2.0.14212.1.  I realized that I had to upgrade the installation software before upgrading the Firmware to version 2.1.41 (Build 164606).  However, since the upgrade of the installation software, I could not connect to the router on any browser (Firefox and Chrome).  Instead, I get the error message "-502 Bad Gateway.

  To add to what chadster766 suggested, after pressing the reset button for 30 seconds, try to turn off the router to give him time to rest. After a while, it turns on and plug a PC for it. Try to access the configuration again to 192.168.1.1 page.

  Hope that helps.

• Windows 7 installing software, after installation get an error code 800A004C

  try to install the receiver software Pioneer. After installation I get the path of the message not found error code 800A004C

  The software that you install is compatible with Win7? This site/responsible for software support will say.

  The error is a vb script error - path not found

• I bought the first 13 items, I have the CD and the number series, but after installation it always tells me, it wasn't an original Adobe software

  I bought the first 13 items, I have the CD and the number series, but after installation it always tells me, it wasn't an original Adobe software. However, it is! I have not bought a second hand version or whatever it is, it's new and I haveen can't installed the software on any other PC. What can I do?

  Warning: "Adobe software real failure of Validation...". » | Windows

• Change the kernel settings after 10g Software Installation

  Hello world
  
  I need to install Oracle 10 g 2 in a box of HP - UX Itanium for an upgrade of Database 9i and 10g and some have recommended prerequisites of the kernel are not defined as requested for the installation program. Kernell settings have been changed in order to fulfill the preconditions but the can´t server be rebooted now because it is a production environment, it will be restartedb in two weeks, but I want to start right now with the installation software.
  
  My question is: safetly can I install the software, and after restarting the server, perform the upgrade of my database?
  
  The kernel parameters that failed were:
  Verification of the maxdsiz_64bit = 2147483648;      found maxdsiz_64bit = 1073741824.     Failure of < < < <
  Verification of the maxswapchunks = 16384;           no entry found.                         Failure of < < < <
  Checking the semmap = 4098;                no entry found.                         Failure of < < < <
  
  
  I'll appreciate your help... Thanks in advance!
  
  Alvaro Uribe
  
  Edited by: 865814 01-Aug-2011 13:47

  Hi Alvaro;

  I belive that you can go to to ignore this message on your installation. But after installation you need to restart your server coz if you keep working like this probably will hit you on your db errors

  Respect of
  HELIOS

• Is the plug-in Java TM helps against hacking and viruses after installation?

  Is the plug-in Java TM helps against hacking and viruses after installation?

  @ Otto Davis

  Are what plug-in "TM" you referring?

  And, no, it does not protect against the 'hacking' or viruses.

  Be sure to have an antivirus installed, & always up to date and scan application at least once a week.

  In addition, beyond that, you must practice safe use pc surf / safe.

  Some of the most common infections of malware are 'facilitated' If you have outdated version of the Java, Adobe Flash Player, Shockwave Player, and Adobe Reader.

  Configure your Antivirus software to check the updates on a daily basis, at a time where you are sure that the computer will be on.

  Arrival to Windows Update and install updates important offered--> http://windowsupdate.microsoft.com

  Make sure that automatic updates is enabled.
  How to configure and use automatic updates in Windows
  http://support.Microsoft.com/kb/306525

  Verifier check on other issues of update, visit Secunia Online Software Inspector (OSI)--> http://secunia.com/software_inspector/

  HTH

• HP Envy 110 is not printing/scanning after new driver for OSX Maverick

  Installed the new driver for the operating system MAC OSX 10.9.4.  After installation, I can not print or scan wireless even if the screen of the printer indicates that it is connected to the network from my computer.

  When you try to print, repeatedly get an error message "Cannot find printer.   Strangely, if I turn printer on, and besides, the page is printed.  This continues to happen whenever I try to print.

  In addition, I can scan only the computer.  If I try to scan directly from the printer, I get the following error message: "make sure that your HP printer software is installed.

  I have installed and reinstalled the new driver several times to nothing does not.  I also rebooted both my computer and my network without success.

  Does anyone else have this problem?

  Hi Melnee ,

  What you have described, it is clear that a disconnect occurs on the side of the router, maybe a problem with the ports.  I recommend you only to contact the manufacturer of your router, as to resolve any problems that occur in the router.

  Please hold me.

• The purpose of doing a virus scan after Windows starts in safe mode?

  I've heard some suggestions that, in certain circumstances, it is best to do a virus scan after Windows starts in safe mode. So I have two questions:

  (1) would what type of circumstances you perform a scan antivirus in safe mode?

  (2) what are the advantages or disadvantages?

  I have found no reliable info that answers to these questions and would be grateful for any info, or even just a point in the right direction.

  Thank you!

  Hello

  The advantage is that some process and services are not loaded in Mode without failure there is less chance
  This malware can load and interfere with the process. The downside is the same if its best
  to run the malware checks mode safe and then in Windows. Or run in Windows and as appropriate
  difficult to remove malware is detected then run in Mode safe, then in Windows.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• My seagate drive external drive keeps ejecting properly after installation of OS El Capitan

  My seagate external hard drive keeps ejecting properly after installation of OS El Capitan, it locks also towards the top and turns off, the ext drive when using, I have to restart my IMac 27 inches.  I have two ext hd who does very well for years before the installation of the operating system El Capitan

  If you have installed the Seagate Software, please delete and see if there is no change.

  Any third party software that is not installed on the App Store or by drag-and - drop in the Applications folder and uninstall by drag - move to the trash, is a modification of the system.

  Whenever you delete changes to the system, they must be eliminated completely, and the only way to do this is to use the uninstall tool, if any, provided by the developers, or follow their instructions. If the software has been removed incompletely, you may redownload or reinstall even to finish the job.

  I never install modifications of the system myself, and except as stated in this comment, I do not know how to uninstall them. You'll have to do your own research to find this information.

  Here are some general guidelines to help you get started. Suppose you want to remove the so-called "BrickMyMac" (a hypothetical example). First of all, menu using the product, check if there is one, for instructions. Not finding here, look at the Web site, let's say www.brickmymac.com. (Maybe it's not the name real site, if necessary, search the Web for the name of the product). If you don't find anything on the Web site or in your search, contact the developer. While you are waiting for a response, download BrickMyMac.dmg and open it. There may be a request here as "Uninstall BrickMyMac." If this is not the case, open "BrickMyMac.pkg" and look for an uninstall button. The uninstall program can also accessible by clicking on the button customize, when one exists.

  Back up all data before making any changes.

  Generally, you will need to restart the computer in order to perform an uninstall. Until you do this, there may be no effect, or the unpredictable effects.

  If you can't remove the software in any other way, you will have to erase and install OS X. Never install any third party software, unless you're sure you know how to uninstall in the contrary case, it can create problems which are very difficult to solve.

  Try to remove the complex system of changes by hunting for files by name, often will not work and can make the problem worse. The same goes for 'utilities' as the 'AppCleaner"designed to remove software.

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph