BHDrvx86.sys causes BSOD with a log off

Running Windows vista on a dell Inspiron 530, Ive been doing a BSOD when that I disconnect. Ive been able to trace the BSOD for a BHDrvx86.sys driver. Its used by Norton but I'm told its part of windows. If I disable it closes at norton sonar. Anyone know if theres a way updae this type of driver, no info was updated by the Device Manager.

I had this same problem, but it has started happening after a Norton updated. The computer is Vista SP2 and Norton is the version of Comcast. After uninstalling Norton, the problem disappeared. I have not tried to reinstall, where it could have been corrupted files that could be fixed by a reinstall. Is anyone out there found a fix for implying no dumping Nortion?

Tags: Windows

Similar Questions

vmx86.sys causes BSOD Win7

I use VMware® Workstation 7.0.1 build 227600.
Once, when I run the application, windows is dead...
Not always been that way, just sometimes.
It's analysis that windbg made, if you need, I can send you the dmp file.
Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16617.x86fre.win7_gdr.100618 - 1621
*******************************************************************************
- *
- Analysis of error checking *.
- *
*******************************************************************************
LOCKED_PAGES_TRACKER_CORRUPTION (d9)
Arguments:
Arg1: 00000001, the MDL is inserted twice on the same list of processes.
Arg2: 87f1ffc8, address latch structure monitoring.
Arg3: 87e5a2a8, address memory descriptor list.
Arg4: 000006c 0, number of pages locked for the current process.
Debugging information:
-
ADDITIONAL_DEBUG_TEXT:
Use '! findthebuild' command to search for the generation of target information.
If the build information is available, run '! findthebuild s; .reload ' to set the symbol path and of loading symbols.
MODULE_NAME: vmx86
FAULTING_MODULE: 83e43000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4b5a8dee
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XD9
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 83ebbe23 to 83f1fd10
STACK_TEXT:
WARNING: Information not available stack unwind. Sequence of images may be wrong.
a75a48dc 83ebbe23 9 00000001 87f1ffc8 nt 000000d + 0xdcd10
a75a4910 83ebbce6 87f1ffc8 9aa18936 00000040 nt + 0x78e23
a75a49d0 9aa14912 87e5a2a8 00000002 00000001 nt + 0x78ce6
a75a4a18 9aa18936 89826b 00 00040000 and 00000000 vmx86 + 0 x 3912
a75a4a40 9aa18cec 89826b 00 00000000 vmx86 + 0 86cc5778 x 7936
a75a4a7c 9aa118d4 86cc5778 88424e98 3dfbfe30 vmx86 + 0x7cec
a75a4ac4 9aa123d1 87c9dde0 86cc5778 00000168 vmx86 + 0x8d4
a75a4aec 841726c 3 87dbd228 b5134f68 880b4f80 vmx86 + 0x13d1
a75a4b10 83e7f473 00000000 87dbd228 nt b5134f68 + 0x32f6c3
a75a4b24 84080f6e 880b4f80 b5134f68 b5134fd8 nt + 0x3c473
a75a4b44 8409dd5f 87dbd228 880b4f80 00000000 nt + 0x23df6e
a75a4be0 840a053a 87dbd228 b5134f68 00000000 nt + 0x25ad5f
a75a4c14 84a9e829 000002d 0 00000000 00000000 nt + 0x25d53a
a75a4d04 83e8644a 000002d 00000000 00000000 0 Hookport + 0 x 4829
a75a4d34 76fc64f4 badb0d00 0012ee10 00000000 nt + 0x4344a
a75a4d38 badb0d00 00000000 00000000 0x76fc64f4 0012ee10
a75a4d3c 00000000 00000000 00000000 0xbadb0d00 0012ee10
00000000 00000000 00000000 00000000 0x12ee10 a75a4d40
STACK_COMMAND: kb
FOLLOWUP_IP:
vmx86 + 3912
9aa14912? ???
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: vmx86 + 3912
FOLLOWUP_NAME: MachineOwner
Nom_image: vmx86.sys
BUCKET_ID: WRONG_SYMBOLS
Follow-up: MachineOwner
-

Azure0 wrote:

Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible

Product: WinNt, suite: TerminalServer SingleUserTS

By: 7600.16617.x86fre.win7_gdr.100618 - 1621

*******************************************************************************
- *
- Analysis of error checking *.
- *
*******************************************************************************

LOCKED_PAGES_TRACKER_CORRUPTION (d9)

Arguments:

Arg1: 00000001, the MDL is inserted twice on the same list of processes.

Arg2: 87f1ffc8, address latch structure monitoring.

Arg3: 87e5a2a8, address memory descriptor list.

Arg4: 000006c 0, number of pages locked for the current process.

This verification step is performed only when the driver verifier controls are active. (Or on a checked build, but your 'free' that says dump the password do not here). VMware driver (vmx86.sys) is incompatible with these controls. You need to disable the driver verifier or specifically exclude pilot of VMware Driver Verifier.

(More details: control of audit of MDL here requires a unique MDL for each page of memory we place.) LDM is fine to use for this purpose for e/s when very little memory is actually pinned for e/s. But LDM don't fit very well when pinning of 70% of the memory of the host, as Windows does not have enough memory to the kernel for enough LDM follow this amount of memory. So, we use a data structure that is more effective than that of the linked list of the Windows - which is quite correct, but which causes of Driver Verifier to panic. If we use LDM, we could keep the auditor of happy drivers but you could only pin ~ 10% of the memory of the host and 10% is insufficient to run a virtual machine with performance expectations).

Wmp54g driver RT2500.sys causes BSOD error: driver_ not_les_than_ friezer less_ or_ equality

Try to install WMP54G v4.0 on XP SP3.

I tried all three PCI connectors.

Remove the Chuck RT2500. SYS system starts.

Put back and BSOD error: driver_irql_not_less_or_equal

(Mod Note: published subject to keep stretching threads.) (Thank you!)

Resloved problem with the Ralink instead of Linksys driver.

Win32k.sys caused BSOD IRQL, looking for likely causes

While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys. I have debugged the minidump file and am looking for a reason why it happened. I don't see anything obvious to said in the report that is generated if:

Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
Computer name:
Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
System Uptime: 5 days 2:05:24.971
Loading the kernel symbols
...............................................................
................................................................
.........................................
Loading user symbols
Loading unloaded module list
..................
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}

Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 9f5fffe4, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: 820cbc5b, address memory

Debugging information:
------------------

WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
Cannot read MiSystemVaType memory at 8214d 420
9f5fffe4

CURRENT_IRQL: 2

FAULTING_IP:
NT! MiUnlinkFreeOrZeroedPage + 87
820cbc5b 890c 10 mov dword ptr [eax + edx], ecx

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0XA

Nom_processus: pcsx2 - r4600.exe

TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
ErrCode = 00000002
EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
NT! ExpAllocateBigPool + 0 x 231:
820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
Reset the default scope

LAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9

STACK_TEXT:
cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
WARNING: Frame IP not in any known module. Sequence of images may be wrong.
00000000 00000000 00000000 00000000 0x77d75ca4 085a803c

STACK_COMMAND: kb

FOLLOWUP_IP:
Win32k! Win32AllocPool + 13
5 d a21664c9 pop ebp

SYMBOL_STACK_INDEX: 9

SYMBOL_NAME: win32k! Win32AllocPool + 13

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: win32k

Nom_image: win32k.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa

FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

Follow-up: MachineOwner
---------

So far, this was the only time where I had it coming, but I have not tried from new record yet. Actively running programs are FireFox, Pcsx2 and Fraps. However, I ran these before without this issue arise. I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.

Hello

References to Vista also apply to Windows 7.

This is my generic how updates of appropriate driver:

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tecra S5-10 X - CD/DVD drive causes BSOD with new CD not burned.

Hello!
I have a laptop TECRA S5-10 X with windows XP (downgraded from Vista)

My computer has trouble dealing with discs not burnt from the interface of microsoft. Make a right click on the drive takes more than 20 seconds to answer. After 2 - 3 times (sometimes right the first time) with or without ejecting the disc, I get a blue window of death "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

I tried the Toshiba DVD Diagnostics passes.
I tried to uninstall and reinstall the driver.
I tried to do repair for windows
I installed service pack 3 for Windows XP
I've updated the bios
I've also updated the (Microsoft says it might be useful) NvIdia video card driver

Nothing helps.

I'll be very happy to get any other suggestions that will help me avoid a reinstallation of windows.

Thax in advance

H.

I think you should try to remove the top and lowerfilters as Akuma said. This often solves problems with the CD/DVD drive.

In the worst case, you must reinstall Windows.
You also have this problem only with XP or Vista?

I doubt that it is a hardware problem so reinstall Windows could solve it.

Hibernation is no longer an option with a log off!

You wonder why I lost the option of hibernation when you sign off your computer! Only allows to sleep and stop now. Was it in an update or something I did inadvertently?

http://support.Microsoft.com/kb/928897

I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

See if the above applies.

See you soon.

Mick Murphy - Microsoft partner

Latest Version causes BSOD

Hi I read posts about 6.18 aheap version is not compatible with the HP webcam not

It seems I have the same problem

There were proposals for links to download 6.16, but none of them work

I spent hours trying to uninstall reinstall etc etc,

Very frustrating and a waste of my time.

Please provide me a link to an older version so that I can continue to use Skype.

Thank you very much

http://community.Skype.com/T5/Windows-desktop-client/Skype-6-18-update-error-BSOD/m-p/3522835#M29259...

If your laptop has the webcam HP HD Webcam [Fixed] installed, this may cause BSOD with the latest versions of Skype 6.16/6.14.

The solution is to uninstall the currently installed version and install Skype 6.14.0.104 version.

You can use the like posted download link here:

http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

Don't forget to turn off the automatic updates:

Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

Vista will not register, the computer crashes with log off

Computer crashes with log off of Vista.

Hello

Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
on closed session, restart, or stop. Those who do this will be often blocks that you met.

How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685

Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).

How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------

Tools that should help you:

Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

Autoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

There are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html

There are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.html

Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp

Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/

Hope these helps.

Rob - bicycle - Mark Twain said it is good.

BSOD with igdkmd64.sys error

Hello

I am running windows 7 pro sp1 64 on a lenovo w520. I get the bsod with an igdkmd64.sys one or two times a day. I run the memory test on my computer, which is very good. and have updated all the software and drivers for windows and lenovo. someone has had experience with a solution to this. the computer crashes generally when working on graphics programs, creative suite or modo.

any info would be extremely useful. Thank you!
Joe

Hello

the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

http://www.Intel.com/p/en_US/support/detect

LC

Windows Vista SP2, random BSOD with error checking code 0 x 19

Hi all

I have seemingly random crashes on my old laptop 3 years recently - BSOD with error checking code 0 x 0000019 (0x00000020, 0xe92f4780, 0xe92f48d0, 0x0a2a0440), and BlueScreenView says that accidents are caused by ntkrnlpa.exe and Ntfs.sys. I have absolutely no idea why it happened--unusual does update, none of the material changes & software installations. The system hangs especially after maybe one or two days after starting with some sleep & wake ups inbetween and the only accidents while there are prominent running shows - namely, all the accidents that happened while I was running Firefox. Seconds before the BSoD (shell & all) system simply freezes and does not respond to ctrl + alt + delete, but is still running (as indicated by the fact that once, I forced a power off and after that restart the event log indicates the previous stop at was not planned), then watch the usual BSoD screen.

After doing some googling, I began to suspect that this should be a memory or a hard drive problem, or maybe an overheating causing the two since he not there no significant change of software on my computer recently again issues just appeared without reason. So I cleaned my laptop fan and the heatsink and ensured that the hot air can leave the chassis without being blocked, did some checking of memory with memory auditing Windows - no problems in 5 innings and ran chkdsk on my system partition with all available options - perfectly normal, but the chkdsk has acted quite strangely that check all took about 30 seconds and no normal as the ID information of partition, size etc. that should be there never appeared; is this a normal behavior? or something is wrong with my chkdsk?

I'm still (lol) impatiently waiting for the next crash, not sure whether the problem is still there or not. Meanwhile could you please help me understand what is the problem with my system?

It seems that the disc is the most likely cause. If it is intermittent, it may be difficult to diagnose.

The manufacturer of the laptop provides any diagnosis? Several manufacturers have a key at startup to access the diagnostics.

CHKDSK should last several minutes. There is information about the different ways to run chkdsk here:

http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

You can try this disc test program:

http://www.Seagate.com/www/en-us/support/downloads/SeaTools/

If the version of WIndows does not find anything. Try to use the version BACK from a CD.

Satellite P500 PSPE8U: BSOD with Win7

Hello

As Microsoft Windows C++ programmer I have access to the final retail version of Win7, the X 86 and the 64-bit versions of the Professinal build and version of Windows 7 Ultimate have show stopping BSOD errors and so far I had unsuccessfully in looking for it even if I think that I am closing top.

I am hoping that someone more familiar with Toshiba laptops might have seen this problem before and know the fix.

The fault that happens in x 86 & 64-bit, and upgraded or by pure install.
The system is unstable, crash, and or gel and or cause a BSOD with "sdbus.sys", noted as the cause.
The above is a driver installed by Windows and is a signed file MS, who seems to lead the SDHD slot.

If someone knows something about this anomaly he can answer it please.

concerning
NicW

a result of this. After much trial and error, I discovered if the SD material is disabled in the BSOD and restart Device Manager stops happening. This material is related to the MS sdbus.sys driver, so there is clearly a problem with the MS driver and the Toshiba laptop.

NicW

Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

At all to being able to help solve these problems successfully:

When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

Problems currently on a regular basis (every reboot) are:

(1) long startup (sometimes nearly 10 minutes)

(2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
Services (icons missing, unable to run diagnostic programs, etc.).

In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

are available.

System information:

(A) AMD 64 Athlon 3500 + (2.20 GHz)
(B) 3.00 GB RAM
(C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
(D) ATI Radeon XPress 200 Series (current driver)
(E) all drivers are current (no changes required)
(F) update BIOS (not not required)

Note:

(1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

(2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

instructions of MSFT community on how to do this and what is safe to disable. This helped a little
and I don't miss these features.

(2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

(3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
"I don't know if I should as well as to think that I should keep this system offline and running XP).

(4) I use a security program that securely wipes deleted data, cache password, etc..
Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
I do NOT use the option "delete shadow copies".

My questions are:

(A) what is the cause of the boot extended both office and how to tackle it successfully?

(B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
me of this disadvantage. I would like TO have the Vista boot WITHOUT having to Log in and out to

ensure that the AERO desktop is available and functional.

(C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
Vista? Also, please let know us if you think it would be better to keep these files available if no
conflicts are possible or probable.

(D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
(startup, appearance, services, etc.). so I can enter my security software to exclude it from
be affected?

Thank you in advance for any help you can offer.

Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

Steps to follow:

(1) download the file of v5.53 (10245.exe) driver TWAIN Epson

2) extract to the folder (default location or a location of choice) and open the folder

(3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

(4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

NOTE: You will have to wait a long TIME for the next window appears once complete Vista

research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

running out of patience, that it was my problem-so, the Eureka moment happened!

My camera works great! The only loss is you open TWAIN in the application, is not
automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

Thanks again for your help!

try to use MS-FIXIT

http://support.Microsoft.com/mats/slow_windows_performance/

If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

My computer refuses to stop, restart or log off!

Okay, so my computer does turn off, restart or log off. I was afraid to let him die because I thought that it lights, but he did. When I plugged it in, it starts normally, but he's not where I sign in with my password, it just went. And it's still refuses to close and all that, as I press on stop, but nothing happens. It's as if I did not click on it at all. Someone please Help! I'm bad with computers and it makes me real sad haa. Thank you!

Hello

You did it changes on the computer before the problem started?

Try the following steps:

Step 1: start in safe mode and check if you can connect to your account.

Step 2: Open Event Viewer and locate the error logs. Message of the error logs here so that we can find what exactly is causing the problem.

Check out these links for help:

Open Event Viewer:
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

Step 3: perform a clean boot to verify if a third startup application or service is causing the problem.

See this article for more information on the clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

Steps to perform a clean boot:
a. click the ORB start on your desktop
b. type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
c. in the general tab, click Selective startup.
d. under Selective startup, clear the check box load startup items.
e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
f. click OK.
g. When prompted, click on restart.

NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

Kind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Intermittent BSOD with 0X000000D1

Hello

I have a Lenovo X 250 meeting BSOD with 0X000000D1 driver_irql_not_less_or_equal.

Igdkmd64.sys addresses FFFFF880051AE27B, FFFFF880050EF000, Datestamp 546C13B9...

Anyone encounter this before?

Your support "COMPUTING" is wrong on several levels. First of all, you have a driver of November 2014 and there are at least 3 more recent. Secondly even though he was the most recent driver that does not mean it is not corrupt.

Still related to the video driver

Microsoft (R) Windows debug 10.0.10563.566 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.

Loading dump file [C:\Users\zigza\Desktop\minidump\102115-14679-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available

Symbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * E:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * E:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 64
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7601.23223.amd64fre.win7sp1_ldr.150928 - 0600
Computer name:
Kernel base = 0xfffff800 '03a 67000 PsLoadedModuleList = 0xfffff800' 03ca 9730
The debugging session: Wed 21 Oct 2015 06:57:27.681 (UTC - 04:00)
System Uptime: 0 days 9:58:54.618
Loading the kernel symbols
...............................................................
................................................................
..........................................................
Loading user symbols
Loading unloaded module list
...........
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

Use! analyze - v to obtain detailed debugging information.

Bugcheck 3B {c0000005, fffff8800513927b, fffff8802080dc20, 0}

Probably caused by: igdkmd64.sys (igdkmd64 + bf27b)

Follow-up: MachineOwner
---------

0: kd >! analyze - v
*******************************************************************************
*                                                                             *
* Bugcheck analysis *.
*                                                                             *
*******************************************************************************

System_service_exception (3B)
An exception occurred during the execution of a system service routine.
Arguments:
Arg1: 00000000c 0000005, Exception that caused the error checking code
Arg2: fffff8800513927b, the address of the instruction that caused the error checking
Arg3: fffff8802080dc20, address of the context record to the exception that caused the error checking
Arg4: 0000000000000000, zero.

Debugging information:
------------------

SYSTEM_SKU: LENOVO_MT_20CL_BU_Think_FM_ThinkPad X 250

SYSTEM_VERSION: ThinkPad X 250

BIOS_DATE: 06/04/2015

BASEBOARD_PRODUCT: 20CLCTO1WW

BASEBOARD_VERSION: 0B 98417 WIN

BUGCHECK_P1: c0000005

BUGCHECK_P2: fffff8800513927b

BUGCHECK_P3: fffff8802080dc20

BUGCHECK_P4: 0

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x %p memory referenced to 0 x %p. The memory could not be %s.

FAULTING_IP:
Igdkmd64 + bf27b
fffff880'0513927 b 488b1b mov rbx, qword ptr [rbx]

CONTEXT: fffff8802080dc20-(.cxr 0xfffff8802080dc20)
Rax = 0000000006ea28f0 rbx = ffff0000004c004c rcx = 00000001062f8000
RDX = fffffa8006ea28d0 rsi = 0000000000000060 rdi = 0000000105b 00000
RIP = fffff8800513927b rsp = fffff8802080e600 rbp = fffffa8006ea28d0
R8 = 0000000105b 00000 r9 = 00000000007f8000 r10 = fffff80003c56820
R11 = fffffa800e09c6d0 r12 = fffffa800a557000 r13 = 0000000000000002
R14 = 00000000007f8000 r15 = fffffa800a557000
iopl = 0 nv up ei ng nz na po nc
CS = 0010 ss = 0018 ds = 002 b're = 002 b fs = 0053 gs = 002 b efl = 00010286
Igdkmd64 + 0xbf27b:
fffff880 ' 0513927b 488b1b mov rbx, qword ptr [rbx] b ds:002: ffff0000 ' 004c004c =?
Reset the default scope

CPU_COUNT: 4

CPU_MHZ: 892

CPU_VENDOR: GenuineIntel

CPU_FAMILY: 6

CPU_MODEL: 3D

CPU_STEPPING: 4

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0X3B

NOM_PROCESSUS: EXCEL. EXE

CURRENT_IRQL: 2

ANALYSIS_VERSION: 10.0.10563.566 amd64fre

LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff8800513927b

STACK_TEXT:
fffff880 '2080e600 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: igdkmd64 + 0xbf27b

FOLLOWUP_IP:
Igdkmd64 + bf27b
fffff880'0513927 b 488b1b mov rbx, qword ptr [rbx]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: igdkmd64 + bf27b

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: igdkmd64

Nom_image: igdkmd64.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 546c13b9

STACK_COMMAND: .cxr 0xfffff8802080dc20; Ko

FAILURE_BUCKET_ID: X64_0x3B_igdkmd64 + bf27b

BUCKET_ID: X64_0x3B_igdkmd64 + bf27b

PRIMARY_PROBLEM_CLASS: X64_0x3B_igdkmd64 + bf27b

ANALYSIS_SOURCE: KM

FAILURE_ID_HASH_STRING: km:x64_0x3b_igdkmd64 + bf27b

FAILURE_ID_HASH: {a103711e-7d13-3c9e-b714-f34fb1cf841a}

Follow-up: MachineOwner
---------

0: kd > lmvm igdkmd64
Browse the full list of module
start end module name
fffff880'0507 has 000 fffff880'05521000 T igdkmd64 (no symbol)
Loaded symbol image file: igdkmd64.sys
Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
Image name: igdkmd64.sys
Browse all global symbols data functions
Timestamp: Kills Nov 18 22:51:21 2014 (546C13B9)
CheckSum: 0049668E
ImageSize: 004A 7000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Geniune Intel causing BSOD

MS community,

I added some hardware from Razer (Blackwidow Ultimate keyboard & DeathAdder mouse) my system, a month or two before, and Synapse 2.0 caused BSOD regularly, so I took out starter, and my system has worked very well, until the last two weeks. I am not usually the addition or removal of hardware or software, so maybe I'm picking up cyber-Carbuncles in surfing on... not sure. In any case the last two .dmp files are on OneDrive: http://1drv.ms/1tpXPpW. I hope one of you very smart people can help me understand what is causing my plant.

Thank you all in advance!

Baird

Original title: BSOD are back...

WBM

These 2 are called BCC124 and are related to the material. Since the real interest is mentioned I would run the cpu stress test first

I would also remove the app associated with Bus Marvin/MarvinPro MarvinBus.sys from Pinnacle Systems enumerator. (yours is 2005)

Try this free stress test: http://www.mersenne.org/freesoft/

Prime95 Setup program;
-Extract the contents of the zip file into a directory of your choice
-Double-click on the executable file
-Select "all stress testing.
-Select the test of 'Blend '. If you have already run MemTest overnight, you can run the test of "Small FFFS" instead.
"Number of threads of torture test run" must equal the number of processors multiplied by 2 (if you use hyperthreading).
The best way to do this is to go to the Manager of the tasks of the figure... The performance tab - and see the number of boxes that appear under the CPU usage history
Then run the test of 6 to 24 hours - or until you get errors [b](whichever comes first)
The selection of Test and the file stress.txt box describes the components that insists on the program.

Stop 0 x 124 is a hardware error

If you are overclocking try to reset your settings to standard processor and see if that helps.

If you keep getting the BSOD here are things more than you may want.
This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

Stop 0 x 124 - what it means and what to try
Synopsis:
A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

Generic troubleshooting ' Stop 0 x 124 ":

1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
(2) ensure that the machine is sufficiently cooled.
If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
It is best to run the latest drivers anyway.
(4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
Their website should provide detailed instructions on the brand and model-specific procedure.
(5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

6) trying (stress) test these hardware components that can be put to the test artificially.
The most obvious examples are the RAM and HDD (s).
For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
Who stops working mitigate the problem of the 0 x 124, jump to the next step.
If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
Smash back, obviously the latest addition of software may be somehow connected to the root cause.
If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
(8) clean and carefully remove the dust inside the machine.
Reinstall all memory modules and connectors.
Use a can of compressed air to clean the RAM DIMM supports as much as possible.
(9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

More advanced reading can be found here from a MS MVP IT PRO

http://captaindbg.com/bug-check-0x124-whea_uncorrectable_error-how-to-troubleshoot/

BHDrvx86.sys causes BSOD with a log off

Similar Questions

Maybe you are looking for