BI Publisher on Linux (RHEL)

Similar Questions

• NIDAQmxBase Linux RHEL 6 x86_x64 USB...

  Trying to get NIDAQmxBase 3.6 w / USB support for installed on LINUX RHEL 6.3 x86_x64 WS

  USB 6501 OEM,

  USB-6009 OEM

  running as root:

  [root@NIX1 /] # mount

  usbfs seems to be mounted... etc/fstab to mount it as indicated

  / dev/map/vg_nix1-lv_root on / type ext4 (rw)
  proc on/proc type proc (rw)
  Sysfs on/sys type sysfs (rw)
  type devpts on/dev/pts devpts (rw, gid = 5, mode = 620)
  tmpfs on/dev/shm type tmpfs (rw, rootcontext = "" system_ubject_r:tmpfs_t:s0 "")
  usbfs/proc/bus/USB type usbfs (rw, devmode = 0666)
  / dev/sdb1 on / boot type ext4 (rw)
  / dev/map/vg_nix1-lv_home market/House type ext4 (rw)
  None on/proc/sys/fs/binfmt_misc type binfmt_misc (rw)
  sunrpc on/var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
  / dev/sr0 on/media/NIDAQmxBase360 type iso9660 (ro, nosuid, nodev, uhelper = udisks, uid = 500, gid = 500, iocharset = utf8, mode = 0400, dmode = 0500)

  lsdaq runs and complains about the firmware:

  [root@NIX1 /] # / usr/local/natinst/nidaqmxbase/bin/lsdaq
  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:

  Device error: incompatible firmware.  Serial number: 01646C 23

  Run /bin/FWUpdate update.

  green light on USB 6501 flashes constantly

  running FWUpdate compains as follows:

  --------------------------------
  [root@NIX1 /] # / usr/local/natinst/nidaqmxbase/bin/FWUpdate
  Could not load library /usr/local/lib/liblvrt.so.12.0
  libXinerama.so.1: cannot open shared object file: no such file or directory
  To download the engine Runtime of LabVIEW, go to http://www.ni.com/rteFinder?dest=lvrte&version=12.0&platform=Linux&lang=en

  location of /usr/local/lib/liblvrt.sa.12.0 reports:

  [root@NIX1 /] # locate liblvrt.so.12.0
  /usr/local/lib/liblvrt.so.12.0
  /usr/local/lib/LabVIEW-2012/liblvrt.so.12.0.0

  STAT to file reports:

  [root@NIX1 /] # stat /usr/local/lib/liblvrt.so.12.0
  File: ' / usr/local/lib/liblvrt.so.12.0'-> 'LabVIEW-2012/liblvrt.so.12.0.0 '.
  Size: 30 blocks: 0 IO block: 4096 symlink
  Feature: fd00h / 64768d Inode: 131699 links: 1
  Access: (0777/lrwxrwxrwx) Uid: (0 / root) Gid: (0 / root)
  Access: 2012-10-22 14:27:59.858557301-0400
  Change: 2012-10-22 14:27:59.813443661-0400
  Change: 2012-10-22 14:27:59.813443661-0400

  NIDAQmxBase 3.6 installs VISA and 'C' interface via. \INSTALL, reports success, seems normal.

  cannot run lsdaq, FWUpdate or anything like that on the Menu of Applications National Instruments (NI-VISA submenu, OR Trace of IO.)

  My guess is that the permissions are always watered.

  Solved and was able to update the firmware.

  Well explained here...  http://digital.NI.com/public.nsf/allkb/93C92D41B25341B286257A4D007BACB8

  and here's how-useful.  http://h10025.www1.HP.com/ewfrf/wc/document?CC=CA&DLC=en&docName=c01769573&LC=en

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• Creating a Cluster of Linux RHEL on vSphere 5

  Hello

  Is it possible to linux RHEL VMs on ESXi V5 hosts vSphere cluster?

  I have a few RDMs I can add 1 VM, but they are not visible to add them to the other virtual computer.  These ROW are the shared storage using two virtual machines in an active/passive cluster with RHEL.

  Windows clusters seem to work out of the box there is some advanced configuration settings, I need to add first?

  Thank you

  Hello

  The reason is that, by default, storage filters are enabled (see storage filters - yellow brick for more information).

  To allow VMS access a raw disk, even through the RDM, you must disable the ROW filter. To do this, refer to VMware KB: LUN mechanism creating filtering RDM .

  I hope this helps.

• Red hat enterprise linux rhel 6.4 64 bit vm machine installation successful but after the reboot shows BLACK SCREEN

  I'm under vm workstation 10.0.1 on Windows 7 Ultimate 64 bit, I created a VMware machine in my computer using Media 6.4 RHEL, after all, installation has been completed successfully, The RHEL installation wizard suggested to restart, after restart, the virtual machine shows BLACK SCREEN WITH CURSOR of A in the upper left. FYI my system supports the "virtualization technology intel. Please help, if someone solved this issue. Thank you.

  Thanks for help.

  The problem has been resolved. As I said I was installing OS and then the problem comes after the reboot.

  I selected all the graphics software during the installation of linux. and it worked.

• Installation of 10.2.0.1 on Linux RHEL 5.2 64 bit

  Hello
  
  During installation, checks pre - req failed with the error below.
  
  Actual result: redhat enterprise Linux Enterprise Linux Server release 5.2 (Carthage)
  Full version. The result of this review is: failure of < < < <
  Problem: Oracle Database 10 g is not certified on the current operating system.
  Recommendation: Make sure that you install the software on the correct platform.
  
  According to the m note requirements for install Oracle10gR2 on RHEL 5/OEL 5 (x86_64) [421308.1 ID], I installed all the packages needed.
  
  From metalink note master Note of the requirements of the Linux operating system for database server [851598.1 ID], RHEL 5 64-bit is supported for 10 gr 2.
  But here what is the problem?
  
  Thank you
  Kouadio

  PL see 10gr 2 Release Notes for Linux x 86-64 instructions - http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm#CJAFHGHG

  HTH
  Srini

• OK to combine Robo SourceControl on the same box as RoboHelp Server/DB? Publish on Linux?

  Hi all

  My client is currently using RH7 and publishing a system 700 + subject to WebHelp on a Linux Server (which is physically located in an office of a few States away). They want to upgrade to RH8, start using source code control, implement RH8 Server to capture usability monitoring reports and generate WebHelp Pro. Here is the configuration they are considering:

  Location 1: Several PCs author with customers from RH8 (which will each need to install Robo SourceControl so and point to the correct server?)

  Situation 2: Combined server:

  -Windows Server 1.5 w/JRE, Tomcat 6.0.14 and SQL Server2008 (I'm assuming that but not sure), RoboHelp Server 8

  -SourceControl Robo database

  -All the 'master' source files that are archived to the source code control

  Location 3: Production Server (Linux)

  -Publish to multiple URLS to different audiences, using a different conditional construction of tag/layout combinations

  -Could extend to several locations

  Questions

  1. all the problems with the combined Server?

  2. the features of usability/follow-up report will work with the Linux server, or they do not need to host everything on the same machine as HR Server 8?

  2 they will be able to generate reports of usability/follow-up to their PC to 1 location?

  3. they are likely to encounter performance problems with access and control input/output files to slot 1 with the files that reside on the server combined with the location 2?

  4 production/editing is extremely slow with their current setup (takes 1 hour to build and publish WebHelp on the Linux server instead of 3). Is this likely improves with the introduction of the HR Pro Server/WebHelp?

  5 off topic - are there recommendations 'bigger' for projects? It is 700 + and more, then they are wondering when they should break it in small projects.

  Thanks in advance!

  Katie Carver

  Senior technical Communicator

  Doc-to-You, LLC

  Hi, Katie

  I'm going to answer what I know online:

  Questions

  1. all the problems with the combined Server?

  I have several customers who host the two Adobe RoboHelp Server 8 (Tomcat) and have SQL Server (or Express) of RoboSource Control database on the same physical machine. I'm not a computer expert, but I think you want to look at how much traffic the WebHelp Pro content will receive and how many authors will accede RoboSource Control at the same time. Certainly, you would like to implement in a first test mode.

  In your case, I highly recommend using a 32-bit server to host DB HR server both RoboSource Control.

  Some of my clients have been able to use 64-bit of SQL and RoboHelp Server on a Windows Server 2008 operating system, but others had to return to 32 bits to host a server HR and/or RoboSource Control. There are unknown environments that Adobe has not been tested and therefore they do not officially "support" 64-bit at the moment.

  The other comment I would make is that RoboSource Control is completely foreign to RoboHelp Server, accommodation so the same server would be strictly a matter of convenience, not a requirement.

  2. the features of usability/follow-up report will work with the Linux server, or they do not need to host everything on the same machine as HR Server 8?

  Unfortunately, Adobe RoboHelp Server 8 is supported only on the Windows Server operating system platform. So, I'm afraid that the content of WebHelp Pro could not live on a Linux machine. I hope that this will change in the future as Tomcat itself it can accommodate.

  3 they will be able to generate reports of usability/follow-up to their PC to 1 location?

  Yes. One of the great features of the reports is that the authors (or anyone who you authorize) can generate their own reports in real time from any web browser with the name of user and password correct. In fact, virtually all the features of daily Web Administration can be managed from a web browser. RoboHelp doesn't even have to be installed on this particular machine.

  4. they are likely to encounter performance problems with access and control input/output files to slot 1 with the files that reside on the server combined with the location 2?

  This is one of those answers "it depends." I have no way to really predict how many authors would hit the source control DB at the same time during the workday while thousands of people are also on the content of WebHelp Pro. Frankly, from what you describe, I don't think it will be a problem. But it would certainly make sense to set up a small test to prove it.

  5 production/editing is extremely slow with their current setup (takes 1 hour to build and publish WebHelp on the Linux server instead of 3). Is this likely improves with the introduction of the HR Pro Server/WebHelp?

  They open their RoboHelp projects from a local network share? Hope not. Projects must be open and knitted on a local hard drive. They are perhaps using VPN? Wow. A project of 700 subject? It's pretty small. Who is not really her right. There massive amounts of graphics, multimedia and PDF documents in luggage being published? I can't imagine this measure as long? Or maybe it's a problem of bandwidth/network bandwidth. It's really hard to say. (Unless it's on a network and which could explain it!)

  5 off topic - are there recommendations 'bigger' for projects?  It is 700 + and more, then they are wondering when they should break it in small projects.

  No best size, although obviously performance finally comes at a given time. Break up in separate projects, it's really a matter of convenience. Some creative teams prefer to have segments of content 'possessed' by designated authors even if everyone can get to it, if they wish. Thus, it break into separate projects and using a Parent/child, merged system can certainly help make it easier to manage regardless of the number of subjects. I think if you're going to do in the future in any way, you should start now, because the split, it will be harder it grows.

  My two cents.
  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• Reg: 10.2.0.3.0 DB download for x 86 Linux (RHEL 5.1)

  Hello
  
  I'm looking for the download of the database Oracle 10.2.0.3.0 for Linux x 86 to install on RHEL 5.1 server.
  I find myself in the search for links to the download of 10.2.0.1.0 for Linux x 86 and patchsets to upgrade to 10.2.0.3.0.
  But I need a medium that offers 10.2.0.3.0 on install.
  It would be very useful to me if I get such a link, if it exists.
  
  Poongodi

  This means that I have to install 10.2.0.1.0 and upgrade to 10.2.0.3.0

  Yes that's correct.

  Pls guide on what I need to install the DB in the RMAN DB catalog.

  Please read the Readme file that accompanies the installable. Which has instructions for the update of database catalog. Of course, you can always have accurate information to My Oracle Support.

  I hope that there will be no problem of compatibility between 10.2.0.1.0 and 10.2.0.3.0

  Its always recommended to upgrade the system to test first and check for all these questions.

• How to change IP host on Linux/RHEL for virutal host only network?

  I have a Windows XP guest running on RHEL 6.2 host.  I'm using VMware Workstation 8.0.3.  I have a network card only virtual host without DHCP.

  My guest must use 190.168.128.1 through 190.168.128.9 ip addresses.  However, this suspended with the 190.168.128.1 automatically assigned host address.  I can't find a way to change the address of the host.  I would like to 190.168.128.10.

  Strangely, my virtual network cards do not appear when I click on the network icon in the taskbar.

  Previously, I had this setup configuration up on top of a host Windows 7 and I could easily change this setting if the properties of the virtual network adapter.  In Windows, when a new virtual adapter is added, it appears in the list of available adpater.

  Thank you

  Marty

  but in my file/etc/vmware, I have only one file for vmnet8 and not 1 and 2.  They are present, if I run ifconfig.  Also, if it's important, I do not use DHCP on each host only virtual network.

  You will need to add the following in the file networking/etc/vmware/networking as root and then reboot the host.

  With the machine virtual shutdown, not suspended and VMware Workstation closed...

  In a Terminal:

  su -
  nano /etc/vmware/networking
  

  Add the following under code: answer Yes to VNET_1_VIRTUAL_ADAPTER

  answer VNET_1_VIRTUAL_ADAPTER_ADDR 190.168.128.10
  

  CTRL + O to save Ctrl + X to exit

  Restart the system (shutdown - r now) If you want to do it from the Terminal.

  There actually is a way to stop the VMware Network Services to then modify the file, and then restart services and without having to restart however I do not have orders in hand for a restart of the host must take care of it.

• HRMS installation on a VISION on Linux RHEL 5 12.1.1

  Ive tried to find information about how to install human resources, payroll and SSHRC on vision.
  
  With this script, I get
  
  SQL > select substr (inst.application_id, 1, 10) 'App ID. "
  2 substr (tl.application_name, 1, 45) "App name"
  3. decode (inst.status, 'I', 'Installed', 'No,' Not installed ',)
  4', 'Shared', 'L', 'Custom') 'status '.
  5 FND_PRODUCT_INSTALLATIONS inst,
  6 FND_APPLICATION_TL tl
  7 where inst.application_id = tl.application_id
  8 and tl.application_id as 80%.
  9 order of inst.status;
  
  The application ID
  ----------------------------------------
  Name of the application
  --------------------------------------------------------------------------------
  Status
  -------------
  800
  Human resources
  Not installed
  
  801
  Payroll
  Not installed
  
  The application ID
  ----------------------------------------
  Name of the application
  --------------------------------------------------------------------------------
  Status
  -------------
  
  802
  FastFormula
  Not installed
  
  809
  Time and Labor engine
  
  The application ID
  ----------------------------------------
  Name of the application
  --------------------------------------------------------------------------------
  Status
  -------------
  Not installed
  
  804
  PS3
  Not installed
  
  808
  
  The application ID
  ----------------------------------------
  Name of the application
  --------------------------------------------------------------------------------
  Status
  -------------
  Time and work
  Not installed
  
  805
  Benefits advanced
  Not installed
  
  
  The application ID
  ----------------------------------------
  Name of the application
  --------------------------------------------------------------------------------
  Status
  -------------
  803
  DateTrack
  Not installed
  
  
  8 selected lines.
  
  Can someone give me please the relevant steps/patches/metalink notes installation of HRMS? Thank you guys.

  Hello

  Have you installed a demonstration of vision database? The application, click Help > about to get the name of the database.

  The installation steps and the pre - req can be found in (Note: 761564.1 - Installation of Oracle Applications and upgrade 12 Release Notes (12.1.1) for Linux x 86).

  Thank you
  Hussein

• Display of icons in 10g runtime (on Linux RHEL 5)

  Hi, I read several threads here about the display of icons in the 10g runtime.
  
  Currently, I am able to get the icons to work on my localhost Windows machine and the icons correctly.
  
  However, my icons are not displayed when I copy on the Linux machine. My forms compile correctly. I made sure they were case-sensitive.
  
  I modified the Registry.dat file to point to the path where so I tried the icons (in my case, / home/OraHome_1/yb/ico, where I put all my icons in a file called icons.jar).
  
  I also modified the default.env file to point the CLASSPATH on this directory as well.
  
  I'm missing something on Linux, because it works on Windows.
  
  Thank you
  Chris

  do you have the formsweb.cfg imageBase = codeBase parameter?

• Installing oracle on rhel on VM ifconfig

  Dear friends...
  
  I have install the virtual machine on windows xp, and in it, I install linux rhel 5,.
  
  Now, I read the steps to install oracle 10g r2
  one of the preinstallation steps is to check the IP address to put in
  
  / etc/hosts
  
  When the root Linux prompt, I gave the command
  
  ifconfig eth0
  
  I get command not found error message...
  
  Please someone help me...
  Thanks and greetings
  
  Published by: AAP on 18 February 2012 03:23

  I think there is a problem with your installation of linux, because these places of orders should be in the PATH of the root. Anyway, you can do this:

  1. open a session as root, run "/ usr/bin/updatedb '. It will take some time.
  2. When you want to find something, just type "find something", and the matches will be displayed:

  [oracle@ol6-112-rac1 ~] $ locate system-config-network
  /etc/pam.d/system-config-network
  /etc/pam.d/system-config-network-cmd
  /etc/security/console.apps/system-config-network
  /etc/security/console.apps/system-config-network-cmd
  /etc/setuptool.d/99system-config-network-TUI
  * / usr/bin/system-config-network *.
  * / usr/bin/system-config-network-cmd *.
  * / usr/sbin/system-config-network *.
  * / usr/sbin/system-config-network-cmd *.
  * / usr/sbin/system-config-network-tui *.
  / usr/share/System-config-Network

• Cloning of EBS 11.5.10.2 RHEL 4 (32-bit) for RHEL 5 (32-bit)

  Hello..
  
  I can clone EBS 11.5.10.2 Linux (RHEL 4) for Linux (RHEL5). Source and target texts are 32-bit.
  
  The database is 10.2.0.4 that running 64-bit Linux RHEL4. The target DB server is RHEL 5 64-bit.
  
  If so, can someone tell me what are the possible things that should be checked and validated before cloning. Some documents of metalink referring a similar requirement would be great.
  
  Thank you
  Dev
  
  Published by: 817932 on December 3, 2010 07:12

  Salvation;

  Please check Hussein snoussi previous great post I belive he will answer all your questions

  Cloning RHEL4 to RHEL5 11.5.10.2
  Cloning RHEL3 to RHEL5 11.5.10.2

  Respect of
  HELIOS

• Install Redhat RHEL 6 on IdeaPad Z565 suspended

  I have Redhat Linux RHEL 6, it blocks during the installation on the IdeaPad Z565, which I was surprised, others seen elsewhere?

  Ubuntu works very well I have it on my z565.

• Remote compilation of FPGA on a Linux machine

  Hello

  I try to use the worker of compilation on an architecture based on Linux (RHEL) with a development of Windows 7 PC (Labview 2014). This works if the two machines are on a private network, but not on a managed network of field with several strict firewall rules.

  What are for use on Windows Firewall settings to allow the connection between the worker of compilation and compilation Server?

  (Incidentally: the compile Server seem not to exist for Linux.) "Is it true?)

  Thanks for your help.

  You are right.! There is no compilation of Linux server... So I also use a Windows Server

  For more information, I was able to connect the PC by opening TCP port /3580 (instead of 3582).

  See you soon.