BI Publisher report dissemination outside the office network (10g)

Similar Questions

• 5 view customer disconnects immediately outside the local network

  I work with the 60 day trial of view 5.0 5.0 w/ESXi. Everything is configured and works well inside the LAN, but we have not been able to connect outside the local network. We have a single sign-on server that is associated with a single security server. All the rules of firewall, file server and configuration procedures correspond to installation and administration guides. Try to connect via PCoIP from a variety of devices.

  The client connects, check credentials, allows you to choose a desktop, opens the window of the office, but him freezes and shut up saying: 'the connection to the remote computer is complete.' This happens every time.

  Anny suggestions?

  Hello

  First of all, are you just a black screen that stays there for about 30 seconds then it closes with error? It is usually a problem with the connection to PCOIP. Could be firewall rules blocking a port, it could be the NATs. Security servers can be hard enough for the Setup program.

  First check and see if you can connect by using the view client and RDP Protocol. Also, make sure that through the firewall, the Security Server can access the VLAN Office on tcp/udp 4172. Search for NATing in the external firewall and that your security server for installation of the connection to the server has the external IP address that there are listed (not the internal IP of the server security).

  If you have a team network to talk to them and see if they can track packages. Look at the logs on the server and Security Office.

  You don't have to worry about this error. Security Server does not need to be on the field, in fact it should not really be on the field. It somewhat defeats the purpose of having a security server. The client has authenticated the username and the password and is spent on the desktop then ok. If the Office is unable to connect the user for a reason, then they will be left on the desktop windows request a user name and a pass.

  Hope this helps

  Phil

• Change the folder of default reports from outside the sequence editor

  Hello

  I want to set the path to the folder of the regular reports of TS (xml) outside the sequence editor, i.e. in a txt file. I would like to load this value in the sequence or the performance of model sequential (to read this file). Play with what I achieved only copy reports to different my folder both outside. No one knows how to correctly do this operation?

  See you soon,.

  K

  I have accomplished this setting the path of the report dynamically, using the ReportOptions reminder in my process model.

  I had set the following report options:

  Parameters.ReportOptions.DirectoryType = "SpecificDirectory".

  Parameters.ReportOptions.Directory = 'C:\\Program Files\\Functional Test\\Reports\\' + Parameters.UUT_PN

  Parameters.ReportOptions.BaseName = 'report '.

  Parameters.ReportOptions.UseFormatForExtension = TRUE

  Parameters.ReportOptions.Extension = «»

  Parameters.ReportOptions.ReportFilePath = «»

  Parameters.ReportOptions.NewFileNameForEachUUT = TRUE

  Parameters.ReportOptions.AddTimeAndDateToFileName = TRUE

  Parameters.ReportOptions.GeneratePath = TRUE

  arameters. ReportOptions.Format = "html".

  The second entry above, I set the directory based on the number of game USE which is analyzed by the operator.  So in your case, you will need to set the "Parameters.ReportOptions.Directory" item based on a path read you a text file.   According to the structure of your text, file, get the path of the report (from file) could be done in a few differnet ways...

  Thank you

  Paul Holzrichter

• WRT1900AC of external storage outside the Local network

  I'm trying to set up my WRT1900AC router to access a USB attached as an external storage device. I can access the drive when I'm on the LAN, but I had no success accessing outside my local network. I enabled the FTP option in the section of external storage. With the FTP option is enabled, it then points me to the IP address that my cable modem ISP attributed to the router (192.168.0.2). Obviously this won't work from the outside world because it is not the IPV6 address. I install my modem cable to the port before 21-the 192.168.0.2 address and tried to access from outside by using my address IPV6 (ftp://77.XX.XXX.XX:21) but it will not connect. I was hoping someone could point me in the right direction, as I obviously don't do something here.

  Hello, Steve99888. You must configure the settings of folder first. Check out this link.

• Can I manage ESXi with the GUI Client from outside the private network?

  ESX Server 3i, 3.5.0 123629

  HP ProLiant ML370 G5

  1 P2V Windows 2003 SBS Server virtualized hosting

  Company has 5 static public IP addresses. One is used by SBS, another for the public wireless network. I would use a third party to be able to access the ESX and perform remote management.

  I am able to use SBS Remote Workplace hop on the server or any computer of client desktop and can run VI Client from there, but prefer to do it from my computer so I don't attach resources to the office. two vSwitches - vSwitch0 is the 'network' and vSwitch1 is the "Public network". I configured a VMkernel Port on vSwitch1 like the default (vSwitch0) "network management". vSwitch1 takes the address of the gateway on the private network and when I change it to the ISP on vSwitch1, it also changes on vSwitch0.

  Is this possible?

  Welcome to the VMware community forums.  The VMkernel can have as a gateway, so that's why on vSwitch0 changes when you change vSwitch1.   Technically, there is nothing to stop you adding another on vSwitch1 and vmkernel port giving a public IP address (which you can then connect to the VI client).   That said, it's not recommended to to do.  The management for ESXi port is best left on a private network and possibly protected by a firewall.   Put the vmkernel Internet port would be like putting IP to an IP SAN management or the management of a switch on the Internet.  Yes you can do it, but this isn't a good idea.  Instead, you might consider putting in a simple VPN server and then connect to ESXi through that.

• Cisco router access outside the local network interface

  Hi all!

  I have Cisco router 892 (c890-universalk9 - mz.154 - 3.M4.bin) with firewall area and based on routing strategies.

  Everything works fine, but now I need to have the ability to access external router interface IP LAN addresses.

  For example, I PAT 192.168.4.1 port 8443 to the outside interface IP (93.93.93.2 for example) and I need to check LAN 93.93.93.2:8443.

  ! PAT:

  IP nat inside source static tcp 192.168.4.1 8443 93.93.93.1 - extensible 8443 SDM_RMAP_1 road map

  ! DynNat to the internet:

  IP nat inside source overload map route SDM_RMAP_1 interface GigabitEthernet0

  ! Routing policy

  SDM_RMAP_1 allowed 10 route map
  corresponds to the IP 101
  match interface GigabitEthernet0

  ! ACL 101 for routing policy

  access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.192.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.177.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.16.61.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 172.17.19.0 0.0.0.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 192.168.111.0 0.0.0.255
  access-list 101 deny ip 192.168.3.0 0.0.0.255 host 172.16.194.100
  access-list 101 deny ip 192.168.3.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 10.0.0.0 0.255.255.255
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.31.255.1
  access-list 101 deny ip 192.168.4.0 0.0.0.255 host 172.16.194.100
  access-list 101 permit ip 192.168.3.0 0.0.0.255 any
  access-list 101 permit ip 192.168.4.0 0.0.0.255 any

  ! ACL on the external interface:

  plug-in software component gi0 extended IP access list
  allow an ip
  allow icmp a whole

  ! External interface

  interface GigabitEthernet0
  Description $ETH - WAN$
  IP 93.93.93.1 255.255.255.240
  IP access-group gi0-in in
  NAT outside IP
  IP virtual-reassembly in
  EXTENT of the Member's area network security
  IP tcp adjust-mss 1452
  automatic duplex
  automatic speed
  card crypto SDM_CMAP_2

  ! Inside DMZ interface vlan:

  interface Vlan4
  IP 192.168.4.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  security of the members of the DMZ
  IP tcp adjust-mss 1452

  ! Allow outbound traffic to DMZ to Internet:

  Allow_All_ACL-DMZ extended IP access list
  allow an esp
  permit tcp host 192.168.4.1 host 192.168.111.2 eq 1521
  refuse the 192.168.4.0 ip 0.0.0.255 192.168.111.0 0.0.0.255
  refuse the 192.168.4.0 ip 0.0.0.255 172.17.19.0 0.0.0.255
  allow icmp 192.168.4.0 0.0.0.255 any
  ip licensing 192.168.4.0 0.0.0.255 any

  ! Allow incoming traffic from the Internet to DMZ:

  WAN_DMZ_ACL extended IP access list
  allow tcp any a Workbench
  permit tcp any any eq ftp
  permit tcp any any eq 990
  permit tcp everything any 51000 53000 Beach
  permit tcp any any eq 995
  permit tcp any any eq 465
  permit tcp any any eq www
  permit any any eq 443 tcp
  allow icmp a whole
  allow an esp
  permit any any eq non500-isakmp udp
  host ip 212.98.162.139 permit 192.168.4.0 0.0.0.255
  IP 81.30.80.0 allow 0.0.0.255 any
  IP 192.168.111.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  IP 172.17.19.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  host ip 172.16.194.100 permit 192.168.4.0 0.0.0.255
  host ip 172.31.255.1 permit 192.168.4.0 0.0.0.255
  permit ip host 172.31.255.1 172.17.193.100
  refuse an entire ip

  ! Focus on the area of firewall:

  type of class-card inspect entire game DMZ_WAN_CLASS
  match the group-access name DMZ Allow_All_ACL

  type of class-card inspect entire game WAN_DMZ_CLASS
  match the name of group-access WAN_DMZ_ACL

  type of policy-card inspect DMZ_WAN_POLICY
  class type inspect DMZ_WAN_CLASS
  inspect
  class class by default
  drop

  type of policy-card inspect WAN_DMZ_POLICY
  class type inspect WAN_DMZ_CLASS
  inspect
  class class by default
  drop

  the DMZ security

  
  area WAN security

  Security WAN_DMZ of the pair area source destination WAN DMZ
  type of service-strategy inspect WAN_DMZ_POLICY
  destination of DMZ_WAN source DMZ area pair WAN security
  type of service-strategy inspect DMZ_WAN_POLICY

  Maybe someone can help me to make Cisco to allow ports outside LAN using a NAT?

  I did this on Mikrotik easily = |

  It is due to the fact that they do not allow "hair pinning" by default, once this is configured, it will work.

  Martin

• Need help about Remoteapp outside the local network (2008 R2 Std)

  Hello

  We have installed and configured all the 4 services (RDGM, RDLM, RDWA, RemoteApp Manager). Inside the lan, all published remote applications work correctly but

  When accessing the log on credentials wan are invited on several occasions.

  We use a self-signed certificate created by the remote application server. We have installed the certificate in the certification of approved root authorities store.

  Question-is it possible to access remote app on the wan via this free sign certificate or we need to purchase a SSL certificate?

  Thank you

  Laros

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Printer network 160 E - studio does not work in my office network

  Hi Toshiba team,

  I ' v got a Toshiba e-studio 160 network printer/scanner/fax in my office and I want everyone in the office (network) has access to the printer and scanner functions of the e-studio without using a computer 'server' that must be connected to the local parallel port of the printer. In other words, the printer is connected over TCP/IP and a RJ45 cable to my switch to the office.

  The printer configured with a valid IP address, but in my Office I havn't no matter what WINS server, the configuration field is empty and unused ones. I tried several different methods, but I can't access the printer via TCP/IP. Just the 'PING' command works correctly. I expected that the printer appears in the Windows file sharing folders, but it doesn't. Furthermore, all my computers are equipped with Microsoft Windows XP. I read somewhere in a Board of Directors that a guy has solved this problem by using a program called "P2P", but I couldn't find something like that.

  With original Toshiba drivers, it is only possible to exploit this local printer or on a print share Windows function, but I don't want that a machine is running all the time.

  I hope someone can help me with my problem.

  Best regards
  Michael

  Since it is a forum only for computers laptop Toshiba and Options, I doubt that someone will be able to help you.

  But I found a special page to Toshiba for printers and copiers.
  http://copiers.Toshiba.com/support/index.jsp

  You might find a few details here.

  Good luck

• Reports on the TMS - network packet loss

  Hello world

  I'm seeing packet loss reports in TMS, but there is no info here.

  My network is: VCS 7.0.2 movi, c20 and ex60 registered (SIP) as well as a TMS 13.1.2.

  The vcs is a starter pack and the TMS is the demo version. I first registered endpoint of the vcs and then added the TMS to the network. I have the endpoints addition and vcs to TMS. In TMS, I see the endpoints and the news on their topic, but unfortunately no information in the report of packet loss. I made a call between movi and c20 with packet loss, but no info has been shown in the report.

  I am very new to the TMS, and I wonder if there is something I should be doing in order to make endpoints send info packet loss to TMS.

  I sshed in endpoints and I can see the info on packet loss and jitter through the api.

  Described above is my test network on which I can make prety much all about. I also have the same problem (this time with EX60 endpoints, control VCS and TMS) on a network of clients and on this network that I really need this job.

  Any help would be appreciated. Form what I read end points to send this info by HTTP to MSDS. Am I wrong?

  Thank you for your help.

  Hello

  Endpoint to send your comments to tms on http Yes. I'm not at the office and this cannot be verified at the moment, but I don't know if devices running software like c-series and ex support tc this packetloss reports, I know the MXP legacy for this. If anyone can check it out that would be great. If this isn't the case, I will check it tomorrow.

  At least, you can check that endpoints send your comments to the tms at all looking at the system in the browser tab newspapers.

  Check the trap logs. If you see connect and disconnect traps here, feedback should work.

  /Magnus

  Sent by Cisco Support technique iPhone App

• Just added a windows system 7 to my office network have permission issues accessing the Server 2003. Connects but does not trust the server

  I just added a windows system 7 to my office network. It will connect to the server. QuickBooks can access data on the server, but Microsoft Access is not - says that the file is located outside the intranet.

  Hello

  Thanks for posting the request in the Microsoft community!
  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• View and redirect USB - Office at initialization outside the firewall

  I've been painting these forums looking for a solution to this problem.  I can connect to my Windows 7 Professional VM without problems via the secure SSL protocol, but after login on the USB tab at the top, it says "initialization of the office."

  Now I have seen and read a lot of posts here, and I am sure that this has something to do with my router/firewall physics.  I put a Client computer on the same local network (inside the firewall) and it loads and works very well, complete with USB Redirection so I know that the actual configuration is fine.  However, when I do the same thing from a computer outside my firewall, it gets stuck.

  After reading the other posts here, I forwarded your port 32111 to my server from view, and that did not solve the problem.  I even went as far as to put the server on DMZ and always the same result.

  So to summarize-, it works very well from a computer on the same local network, but when coming out from the local network, it does not.

  Ports, go to the server to display:

  80, 443, 4172, 32111.

  Could really use a few suggestions here.

  OK, so it seems that your environment from view behind a NAT. Tunneling is probably necessary here (see http://pubs.vmware.com/view-50/topic/com.vmware.view.installation.doc/GUID-0FC59EB4-45DA-4B3C-A611-F6B5597E9F0C.html), you must make sure it is on, then make sure your connection to the server can also obtain the MV Office on port TCP 32111.

• 4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to the reserved addresses.

  4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to different addresses reserved in DHCP

  Although it seems that they realize and correct this means my network notifify me of the conflict and that can mean more than 30 emails per day... and on a long weekend which means 90 more e-mails to remove after it making sure it is the same 4 mac address having problems... How can I do that, go away

  Given that you are reserving DHCP addresses, I suppose that you have set the ATV to get automatically addresses. That should work.

  Are there opportunities that they are waking up on WiFi and Ethernet switching? On may switch from one WiFi network to another?

  Do you really need fixed IPs?

  The alternative to the reserved addresses would be to reduce the size of the DHCP pool and set the address, staticly ATV.

  Just by the way, have you given the names of different ATV? This is necessary for the Apple protocols.

  Can you identify the versions of your ATV, see identify your model of Apple TV - Apple Support?

• Cannot open documents after you have uninstalled the Office publisher trial version

  Two days ago, I uninstalled a trial of desktop publisher that has happened, that it is the trial period.
  Now when I open a doc ask me to insert the Office xp professional CD but I have Office Home edition factory installed.

  Any ideas?

  Thank you

  It was a trial version, so you couldn't use unlimited number.
  Also if you want to use this application you need to buy this software.

  However, you said that you are an owner of office home edition. Then why you n t install this software and use it instead of Office xp professional.

• HP Officejet 4620: Office Windows 10 connects to the wireless network printer but do not print

  I have a HP Officejet 4620 all-in-one that I try to use with my desktop computer. The printer has been added to my home network, and I added the printer to my computer via the tab "Devices" Control Panel settings, but when I try to print, nothing happens. The printer icon appears in the bottom right of the task bar that says the printer has "0 documents pending. Strangely, another computer in the office at home, also running Windows 10, can connect and no problem printing to the printer. I tried to install/reinstall the drivers, reset my computer, reconnect with and without a cord USB, and none of this helps. Any ideas on how to solve the problem? My computer was running on Windows 7 until this month when I updated for Windows 10, so I don't know if it's part of the problem or not.

  Hi @leopleuridon,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your printer HP Officejet 4620. I'd be happy to help you with this. Looks like the driver is damaged.

  The software and the driver could have gotten corrupt, so we will need to remove it and reinstall.

  First of all. Please follow the steps in this guide:

  • HP printers - printer problems after upgrade to Windows 10
  • Run Windows updates, keep your computer current with updates for Windows.

  If the problem persists, follow these steps to see if you can solve the problem.
  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10.
  • Perform the clean boot in Windows 10 / 8 / 7.
  • Use the System File Checker tool to repair the missing or damaged system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  To properly remove the printer and drivers, follow the steps in this Post by my colleague @X-23.

  • I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!