BI server do not get up after updating GUID

Similar Questions

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• Flash CC not dΘmarre after update

  Flash CC not dΘmarre after update. He said 'En zelfstudie training' (training and auto-stufy in Dutch) for the update.

  Everything worked fine before the update, now, if I try solo start Flash,.

  It is said: 'Flash works niet meer' (Flash has stopped working) and closes.

  As you can probably message, I am on Windows 7.

  Now here's something interesting: if I double click on a previous film, then Flash starts well and load the previous movie.

  However when I close it and the screen that should appear is the 'new film' dialogue, flash crashes again.

  So obviously something was not install the new update, or the update does not work properly.

  I'm working now with my pre version of flash5.5 cc, I have re-installed to avoid crashing flash whenever I close a file.

  My questions:

  1. where can I connect this problem? (Or am I in the right place?)

  2 can I re - install the previous version, what worked well? (I can live without tutorials etc.).

  3. can try to re - install this version if the above is not possible and how do I do this?

  What fixed the problem for me was just to reinstall Flash CC. I thought I would give it a try, because I couldn't find a message from someone having the same problem.

  So I used the control panel to uninstall Flash, then I tried to reinstall.

  Creative cloud kept saying that Flash is updated, so you can not reinstall. If you click on the gear and choose Exit and then restart creative cloud it will take a few seconds, but we will see the situation as it is and you can reinstall Flash.

  After the relocation, the problem was gone.

  Thanks for the other solutions, I think that it is a practical resource to help reduce Flash if I ever need

  and gives me more confidence in the creative product of cloud.

  Maybe Adobe will pick it up and make it easier for us "normal" users to creative-cloud of

  Choose the version we want. As you can do in CVS systems.

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• iPhone 5 could not activate iphone after updating

  Why my iphone 5 can't be activated? I had an iphone unlock 5 more than 18 months with Mobile Viking as my carrier. I updated my iphone several times. The most recent update 9.3 tells me "your iPhone could not be activated because the activation server is not reachable. Try to connect your iphone to iTunes to activate or via the cell connection in a few minutes. Alternatively, you can try to activate using a Wi - Fi connection. »

  More WiFi, I get this message 'SIM card that you have currently installed in this phone is a carrier that is not supported in respect of the assigned by the activation server activation policy. This isn't a problem with the hardware with the phone. Insert another SIM card of a carrier supported this iphone to be unlocked by your carrier? »

  It's weird because I can't get to the activation screen. My iphone will receive incoming calls. I have 3G and full bars of reception. I can't get past the activation screen.

  I did a hard reset, perforation of the menu drop down and switch to what it restarts. No change.

  I also tried connecting it to iTunes. My computer will load the phone, but iTunes does not detect the phone?

  I also tried to do a manual restore of my iphone, where I hold the menu and power on/off switch until the iTunes symbol and the cable connector appears on my iphone and my iphone is connected to iTunes. still, iTunes does not recognize my iphone.

  I have more recent update of iTunes and my ipad is also updated and working.

  I use Windows 10.

  Thanks for any advice.

  Lee

  I guess that iTunes can't recognize your phone as it is obsolete. Make sure you have iTunes 12.3 or more installed and try activation/restore your phone using it.

• Could not get the "Hide update" option in vista

  I am unable to get the "Hide update" option in my vista. I keep getting invited to download a update that won't install. I followed the instructions to hide it, but when I right click the update option to hide does not show. What I am doing wrong?

  Hey Cody. Thanks for your reply. I think I may have misunderstood Andre's initial response. In the meantime, I think I solved my problem. When I was invited to install the update again once I started doing that and then 'cancelled' after he began to try to install it. When I right click it (the update), while it is in this state of limbo the ability to 'hide' appeared magically in the selection box and I was able to chose him. I still don't understand why it does not show for me without going through this procedure. I hope I could make myself clear to you.

  I'm using Vista which I believe is completely updated at the moment.

• Can not delete emails after update to Thunderbird 31.2.0

  After update for Thunderbird Version 31.2.0 today, I'm not able to delete emails. Just nothing happens. Even the folder "Papierkorb" disappear. Can anyone help?

  Try to rebuild the troubled folder index file.
  Right click on the file - properties - file Repair

• not strong enough after updating iTunes

  Hello

  After updating iTunes yesterday, itunes is not as strong as before; of course, I changed volume in the menu bar as well as in volume ('her') maximum system configuration. If I use VLC, the volume is OK; Therefore, I don't think it's a problem of speakers of the Mac and iTunes.

  Thank you very much for your help

  Haperic

  Hello Haperic!

  From what you have posted, the sound after update of Mac is not as strong through iTunes but is fine using VLC or other applications. We certainly have to check a few things with the volume.

  If you haven't done so already, we'll leave iTunes in the menu next to the  iTunes when iTunes is active. Then quit iTunes.  Or command + Q on the keyboard.  Open later and try to play a few things after.

  No change after that, then go ahead and restart the Mac and try again, please.

  If it's still the same after the restart, then we'll reset the NVRAM/PRAM memory.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  After resetting the NVRAM, you may need to reconfigure the parameters of the speaker volume, screen resolution, selection of boot disk and zone information.

  I hope this helps.  See you soon!

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• We do not get the latest updates to the graphics driver...

  Thanks to AMD for not supporting Sony's Vaio laptop computers, my SVE14a490x can not run a video game, I'm playing because I can't get the last update of the driver.

  For the AMD Radeon HD 7000 m computers laptops vaio series cards are version 12.1, and the latest version is 14.2.

  Can we please get an update on that?

  Hi jakems1990,

  14.3 update may not yet be available on Esupport site and is still waiting for an update to AMD. You can try to visit the AMD site directly and use the auto update option to update your video driver. It will be useful.

• segaments of restoration are not get deleted after completion of transact

  Hi all
  
  
  I do 8i production support.during data archiving activities I m facing a problem restoring segaments. As we know after instruction to commit, it allows free space once all transactions get more, but here its not free space after long back too.
  
  Please suggest me what to do?
  
  don't we have any tool by which I can check and free up space? Another manual way?

  With manual undo management - that is to say using Rollback Segments - will Oracle NOT resize or reduce rollback segments automatically (unless you set an OPTIMUM size). This is the architecture.

  If "I do data archiving activities, so a lot of deletion going on in the database" is, surely, it would be too much effort to write scripts plus two or three to re-create the Rollback Segments (and RBS tablespace) - you can even manage 'windows' archiving to do if you don't really have the space to the tablespace RBS. I guess that the "check database" is not automatic and requires the DBA run scripts. How much more effort is to add a few scripts and steps for managing Rollback segments?

  In normal operation it has no reason to shrink/drop/recreate Rollback Segments - even where a batch can increase requirements RBS for 2 to 5 times daily batch. Leave RBS to the maximum size is the easiest and safest.

• IPad 2 could not be activated after update ios 9.3

  I can't activated my iPad2 after updating ios 9.3

  I'm having the same problem and don't have a clue what to do.  It shows just connect my iPad to iTunes to activate it, but how do I do that if I can't go to iTunes?

• iPad2 will not be 'activate' after update-"activation server is temporarily unavailable."

  IOS downloaded again today for my ipad2, but not "activate", tried several times during the last hours 7, get message ' could not be activated because the activation server is temporarily unavailable, try to connect your iPad to iTunes "but can't do it because I can't use the device!  I've never had problem in the 3 years I've owned the device.

  When they say connect to iTunes that they intend to use iTunes on a computer to try to restore the device. He has worked for some.

  http://support.Apple.com/kb/HT1414

  Or you could wait it out and see if Apple fixes things.

• Not getting my windows updates after downgrading to windows 7 Windows 10.

  I was not able to update my computer after that I had to reinstall windows 7.  I did Windows Update agent 7.6.7600.320, that I was stuck on this issue for 2 days now. I've tried everything. Help, please

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  If looking for updates to hang on a current installation,

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!