Biased display of LCD HP w2408h - cannot fix

Similar Questions

• Pavilion dv6700: Pavilion laptop computer under Vista: Windows does not start, the Startup Repair cannot fix it. What to do next?

  Hello
  My laptop seven year old made me proud til yesterday, but now it does not fire upwards. Instead, it hangs for a minute or two (black screen, no HARD drive light blinks, nothing), while it charges to a screen with two options - either start the system restart or start Windows normally. The second option takes me around the loop again. The first option tells me that it cannot fix the problem automatically. When I display the error details, it lists all of the tests, as adopted successfully, but ends with the words: "Root cause found: failure so that the Setup program is underway.

  I'm sure I know why she fell: two days ago, I left all my files on a portable player and defragmented the disk. The idea was to speed up the machine and get it running like new. He immediately started to hang when connecting, so I thought, well I'll go for a complete restoration of the system. I followed the procedure using the disks provided with the machine, and that's when it stopped working completely. I felt that this was more than the aging than HARD drive could take.

  My attempts at rejuvenation have actually caused his untimely death? Or is there a difficulty - something I could undertake?

  Or should I just bite the bullet and go and buy a new machine? When everything (screen, keyboard and trackpad) worked so well, it seems a shame...

  Any help or thoughts welcome. Thank you

  If you really want to resurrect, you could certainly purchase a new hard drive and try to restore the system of work using the recovery media - but then, even if it did work, you would have still lost all your data, settings, and applications in the process - and having to reinstall all your applications everywhere again.

  Hey, don't feel bad, I'm guilty of this too - has recently attempted to resurrect an era Tablet XP PC so that it can run Win10!  He went from XP to Vista, Win7, for Win8 - and along the way, gains of new memory and drives hard - but the Win10 bet was too.  So, I got to a "give up to use it.

  However, I also kept a cell phone 5 year alive by replacing the HDD with a SSD and adding more memory.  So now it is faster than ever, it has been and works like new.

  But... He has NO touchscreen, there no USB3 ports, it doesn't have 1 GB ethernet - and the list goes.

  Thus, it works very well for what we use it for - but it can't really be upgraded, so sooner or later, we will have to replace it.

  Everything depends on how much you need 'new' - touch screen, stylus, handwriting, camera, 3 USB ports, display port jack, HDMI ports... etc.

• After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

  If you see the lock of Activation screen after update your iOS device, you want to try the following:

  -Restart your iOS device and try to connect again.

  -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

  -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

  -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

  -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

  I hope that helps!

• my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  Hello

  1. are you able to use with other applications that connect to the Internet?

  2. when exactly you get this error message?

  3. should we come up with any specific Web site?

  4. what version of Internet Explore do you use?

  5. don't you make changes to the computer until the problem occurred?

  6. the problem occurs in safe mode with networking?

  I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  For your reference: Internet Explorer could not open the Search Page.  http://support.Microsoft.com/kb/219004

  Hope this information is useful.

• Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

  Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

  Hello

  1. what exactly is the problem?
  2. Why do you think malware are causing this problem?
  3. What have you tried in safe mode?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• get 80070002 error, Mr. fix cannot fix

  get 80070002 error, Mr. fix cannot fix

  Follow the steps described in this article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• Windows 7 boot CD system recovery cannot fix the Master Boot Record is damaged or missing?

  This question is on the drive that Windows 7 users can make by going to the backup and restore > create a system repair disc, and then burn the disc.

  Windows says that this disk can be used to start the computer. However, you will not necessarily be able to boot your Windows 7 operating system from the hard drive. When I had a problem recently (shut down system and on reboot I got a message BACK that says "Boot MGR missing") this disc is not to try to do a repair. In the system recovery Menu, you see here when you start the CD:

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery...

  I chose "Startup Repair" and he couldn't fix anything. I ended up cloning of my hard disk from a backup.

  Of http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7

  "Are there problems that Startup Repair cannot fix?

  Startup Repair can only fix certain problems, such as missing or damaged system files. He can't fix the failures of hardware, such as a failing hard disk or incompatible memory, nor it protects against virus attacks.

  Startup Repair is not designed to fix Windows installation problems, is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Windows Help and Support. »

  So here's my question: how to create a bootable CD that has everything you need to fix the Master Boot Record, whereas in case your startup files are damaged, altered, or deleted (and of course, you can not start your system from the hard drive) it will be either fix the files on the hard disk or at least still start your operating system on your hard drive?

  To answer my own question (which becomes a habit on this forum): http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html

  It turns out that the repair CD Windows 7 Sytem that I had done was the right tool for the job but I didn't know how to use it. The above link explains how to use the command prompt window to repair the boot record.

  Other advice, I had was to have used the "Startup Repair" option in the Tools menu of recovery after launching the repair CD, but then he runs three times. For some reason, it takes three times to run before it can solve the problem. I think that the command prompt window method is probably more reliable.

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• I can't connect to my mac because the SHIFT key is down. Then he showed the top letter and can not connect... The mac is also overheating. I went to the apple store and they said that they cannot fix and need to send to the factory. Connection of same slo

  I just used my mac. I bought it on January 2014.

  A few months ago I couldn't connect to my mac more. There is nothing special on my mac to record.

  He was showing the wrong password when I tried to connect to my mac. It is overheating sometimes without help.

  So, I brought it to the apple store and they said that the shift key is down and therefore superior letter is all the time. and they could not help me open on the inside. Apple store guys suggested me to display somewhere or send it to the factory.

  My question is

  (1) what should I do

  (2) if I send to the factory or should go to the repair shop.

  you guys have an idea what the problem with my mac?

  I suggest you send to the factory, or if you have an apple authorized dealer / repair shop to fix the SHIFT key first, then a glance as to why the fan is still running hot.

  Maybe something has damaged the keyboard (shift key) area and also the fan internal.

  You can't have something special on the computer, but I'd always spend extra money to repair.

  The sooner, the better.

  If you need take photos or documents off the power the computer have you tried to connect an external keyboard to type your password?

• Are displayed solutions / suggestions for action to fix a breakdown "upgrade library" for the mail after update El Capitan 10.11.2 accurate and useful?

  After five days of reading and discussion of the best way to go beyond the grip that appeared during the upgrade of El Capitan 10.10.1 to 10.10.2,"limited that I have no evidence that the steps provided and online by Apple engineers are the real solution.

  System and the details of the hardware:

  Start of OS: El Capitan 10.11.1

  Downloaded from Apple and installed update: El Capitan 10.11.2

  Computer: Power Book Pro, early 2011; 15-inch display

  Memory: 8 GB

  The window "Upgrade library" appeared immediately after the installation of the new operating system (. 2) and to try to use the Mail. The progress bar seems to stall and all messaging functions becomes unavailable. Precious data backed up 10 days before were not available on the computer. Apple consultants advised against the use of Time Machine to reinstall a backup Time Machine 10 - day old.

  Councillors, local and by phone from Apple support, recommended repeatedly running time-consuming terminal and orders of OS that would be to check and fix permissions.

  The activity of "Upgrade library" report Mail appeared repeatedly stalled as it was blocked from the outset.

  Finally, despite the appearance of an interim report to a standstill, I authorized the computer to continue working - even if the same apparent have absolutely no interim report - again - saw on the screen. I left the computer in precisely this configuration for five hours. The progress report on screen disappeared. I restarted the computer and Mail worked now, my data have been recovered.

  There is no evidence of this challenging experience that change the permissions of the home and the user had no impact. It is conceivable that had I was sick from the start, has allowed the computer to work (while the window of progress reported no progress) for five consecutive hours, the conversion of my mail e-mail data V 2 Mail V 3 (what was going on behind the scenes) could have taken place with zero assistance of a technician or the forums.

  Conclusion: I appreciate the hand holding, (perhaps useless) preparation of 'clean' permissions, expertise, training of experienced Apple staff who guided me through the steps of permissions, but there is no evidence of my experience that the stall, I knew was a permissions problem. It is quite possible, based on what I've seen, that just after leaving the computer running his own for five hours, or even overnight, perhaps gave the same result.

  Apple experts suggest that you reset the permissions. I suggest cancelling the computer for an evening, ensuring that energy preferences are set to allow the computer to work constantly without interruption, could give the same result. If the reset of the House / permissions for the user of the BONE and the Terminal are proven steps until the computer crunching to a conclusion, which is not obvious in my experience. It is possible from what I saw just the computer to perform its functions - despite the progress apparently stuck screen which does not indicate that progress - could be a simpler solution.

  If the Apple experts or users know better, is a necessary first step to reset the permissions, I'd be interested to know that.

  PS sorry my fault for typing in the opening graph: it should read 'when upgrading El Capitan 10.11.1 in 10.11.2' (No 10.10.1 to 10.10.2)

• String based status display on LCD

  I'm building a water level regulator

  so, based on the water level, I need to show "empty / full quarter of tank / tank half full / full tank" on LCD screen

  now I understand how to display texts replacing LCD but no egt it how to show more than one two status of texts based on LCD

  Help please

  Oh sorry saved for 10 now.

  Hope this is what you mean.

• My HPC5180 stopped communicating with my computer. A ran scan Dr. façade prob. cannot fix

  The scan doctor told me to run the hp Solution Center to enter and solves the problem of the façade as I cannot scan from the front panel more. I uninstalled and reinstalled x 3. Why can't sweep fix Dr. prob frontpanel on its own?

  If you receive a message about scanning parameters are not set or there is no analysis Options, there is a document showing a information how to re - activate the shortcuts to scan on the front panel of the printer. This document can be found here.

  I hope this helps. Let me know if you need additional information.

• Mr. Fix it cannot fix the DVD/CD, reading and writing problem

  I had a problem a few months ago this onc I put a CD in the CD/DVD drive, it can't read and rejected and ask to put a readable CD, then I run Mr. Fix and the problem disappeared. recently just the same problem, I tried Mr.Fix but it cannot solve the problem, then it is there another way to solve the problem

  Best regards

  Ramzi salameh

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - much real experts help and hardware information
  http://Club.myce.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">