Billion BiPAC 7300 G with C6380 wireless issue

Similar Questions

• Satellite Pro A200 wireless issue sometimes disconnects

  Hello

  I have a Satellite Pro A200 with a wireless issue.
  I use home wireless. Every now and then while surfing it won't find the page. I try to connect via my VPN connection I have for the office.
  If you click Cancel, it will sometimes continue surfing very well but sometimes can not find the page.

  I disabled the wireless and connection is used hard and no problem.
  It would be desirable to re - install the drivers for the wireless?
  I think I've removed the software toshiba Wireless thing (forget his name) when I got it.
  So maybe that's the issue.

  Any help would be apreciated.

  Thank you

  Of course, it would be desirable to update the WLan driver in most cases it s WLan compatibility issue between card WiFi and router

  I recommend updating the driver WLan and also you can update the BIOS if a new version has been available for your laptop model

  Best regards & good luck

• m11x r2 issues with car wireless in windows 8

  I upgraded my laptop Windows 8, but I'm having some problems with the wireless card. After a few minutes of use, it will randomly fall the network connection. I have to disable and re-enable the network card to get connected again. Is there an updated driver for the wireless card? I think it's an Intel card, but maybe it's the Dell Wireless card.

  Hi, that give a try.

  Make a left click in the lower right corner and open Device Manager.

  Click network adapters and find your wireless card.

  Right-click on it and open properties.

  Click power management and uncheck the BOX "allow the computer to turn off this device to save power".

  Click OK, and then close all windows.

  You use the native drivers of windows 8 to run your wifi? If so and the solution above doesn't work try to download the correct drivers from the Microsoft or website killer, according to what brand wifi card you have.

• HP Envy 17-j053ea (E7A75EA) wireless issues

  Hello

  HP Envy 17-j053ea (E7A75EA) wireless issues

  Very slow performance on wireless and many drop-outs.  Don't you this problem with other laptops, etc. It doesn't matter how close to the router that I am.  It is virtually unusable.  Netwrk cable is very fast, this laptop is fine.

  I updated the bios to the latest version.

  Wireless device is Intel Centrino N2230 network card. It runs the latest driver - version 15.10.0.11

  Any help please it's driving me crazy?

  Thank you

  Malcolm

  Hello

  The latest drivers still does not work.  Finish I swapped out for an Intel Centrino Advanced - N 6235, which works perfectly and is steady as a rock.

  Too bad that I had to do it on a new computer laptop well!

  See you soon,.

  Malcolm

• Problem with the wireless on the system tray icon.

  Original title: wireless

  not found wirreless icon in the taskbar

  Hi Amourhbone,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the icon on the system tray wireless.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  Provide us with a few details in order to better understand the issue.

  1. which version of the operating system are you using?

  2. deal with any problem with the wireless network using Internet?

  3. do you receive any error messages?

  4. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
  http://support.Microsoft.com/kb/945011

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Unable to share the wireless internet with other wireless devices

  Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
  Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

  Hello

   
  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3. what version of operating system you are using on the computer?
  4. What wireless device you try to share?

  Method 1:
  You can try the steps in the link and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  Method 3:
  If the problem persists then you can disable firewall on the computer and check.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  For more information about how to resolve common network problems, please see the links below:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

• EA6500 - Wireless issues, possibly related to the leases Varied?

  I am passage of router Netgear WNDR, and this EA6500 V1 really gives me some very minor, recurring wireless issues.  I have to assume its ties to certain parameters, I'm just not see.

  My laptop will lose just an internet connection.  The connection to the router is still strong, but I have to follow the troubleshooting for Win7, it restarts the network card in the laptop and its good once again.  Then a random amount of time later, he'll do it again.  Seems to happen a lot more, I'm of the router, as in the night, the laptop comes on the floor, I'm leaving 5 bars 3 (speed is little unchanged) and I will have 4 or 5 of these occurrences.

  Wireless printer is really been a pain with this.  Since the 430W brother I can find and easy access to the home network.  From there its been sporadic at best.  If I connect to the router (immediately after Assembly), I can see the printer and its Online.  Research on a laptop computer in the House he won't find it.  If I just leave or make several reboots it will come back.  I add, print a test page and everything is fine.  The next day, the printer is in offline mode on the router and is not reachable.  On the printer itself, that it believes its fine.  If I remove the device, and then restart the printer and do everything again I can find it, but only for that day there.

  The laptop computer and the printer are on the notebook 2.4 Ghz network join on n 150Mbps.  I added the printer of the demilitarized zone and increased maximum rental period that the field would allow.  Always without success.

  Any ideas?  With the old router that the printer wireless joined the day we bought it, and two years later, he was still active and had never been restarted.  Even with the laptop.  Its about 3 years and I have never had to restart the internal card like that.

  For now, I went back to Netgear but I'd like to get the EA to work if I can so I can give my old router to my parents.

  Thank you!

  Ryan

  If you have a wired connection stable, this challenge can be because of wireless interference. Try changing the channel wireless 1, 6 or 11.

  If the wired connection is not as stable and as long as you have a stable connection directly to the modem, clone the MAC address of your computer on the page of configuration of the router if you have a cable internet connection. For Linksys WiFi Smart, go to connectivity > Internet settings > enable MAC address Clone > Clone My PC MAC > Apply. For the classic web interface, see this link.

• Using of Windows 8, need to remove outside wireless connections that interfere with my wireless connection - unable to do

  Two unwanted connections always connect, and I guess they are somewhere in the neighborhood.  'Delete' never appears, I read means that they have security blocks are not actually using my computer.  However, they interfere in some way because whenever I have remove control of these two connections and click on mine, they come immediately with the checkmarks.  Therefore, the Explorer, "you are not connected to the internet."  Quite frustrating.  Sure that if I use explore 9 or 10, as note am access to explore my office rather than splash screen.

  Link in double wire and content:

  http://answers.Microsoft.com/en-us/IE/Forum/IE10-windows_8/need-to-delete-outside-wireless-connections-that/3413ce5b-400C-4C83-9cab-6fd54d13e1e6

  need to remove outside wireless connections that interfere with my wireless connection - unable to do.

  2 outside wireless users interfere with my wifi connection. Cannot remove them. Today, my wifi was totally blocked on Windows 8 with an asterisk in addition to the wifi icon. Finally, shut down the computer for a while, started again and immediately accessible all 3 networks and disconnected two parasites. However, computer won't let me remove them entirely (i.e., no ' delete'). Is there a way to do it - makes me crazy? One person suggested access "Manage network connections", but couldn't find where, he said, it would be. Thank you.

  Hello

  Thanks for the reply. Refer to these methods and check the status of the issue.

  Method 1:

  a. open the charms bar, click/click on settingsand then click / tap on the Network icon.

  b. click right , or tap and hold on the wireless network (ex: Brink-router) in the list of networksand click/click on forget this network.

  Note: Windows does not provide the option 'Forget this network' if there is a profile high-speed Mobile which is supplied by the carrier. The option appears only when a custom or user profile is created.

  Note: 'Forget this network' is not available for networks wireless listed that not create you a network profile for.

  Method 2:

  Alternatively, you can refer to this method:

  a. press the Windows and X keys .

  b. click on (Admin) command prompt.

  (c) in the command prompt, copy and paste the following command and press ENTER.

  NOTE: this command will give you the list of all profiles of wireless network on your PC.

  netsh wlan show profiles

  d. in the command prompt, type the following command and press ENTER.

  NOTE: this command will delete the wireless network profile.

  netsh wlan delete profile name = "WirelessProfileName".

  For example, if I wanted to delete my profile from the 7shp (name) listed wireless network, I must type the following command exactly.

  " netsh wlan delete profile name = ' ' 7shp '

  e. close the command prompt and check the status of the issue.

  I hope this helps.

• C6380 wireless at home not seen when I connect to the VPN from the company

  I have a HP C6380 wireless printer which works fine when I'm not connected to the VPN to my company.  I have a WRT54GS of LYNKSYS router.

  When I activate my VPN connection via laptop computer Windows XP, the printer's connection is lost.

  How can I fix?

  You can not fix it.  It is the nature of the VPN to disconnect all devices like printer LAN (and file sharing with other computers besides).

  The only recourse is to use USB directly connected between the printer and the computer when VPN.  The good news is that the printer is OK with having wireless and live USB connections at the same time.

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

• Need help with the wireless internet Power Book G4

  Hi-I recently inherited a Power Book G4.  I have problems to connect to wireless internet.  According to the Profiler systems, it has an AirPort Extreme card, but there is no icon on the screen wireless.  Advice to connect would be appreciated!

  Thank you-

  Stephanie

  The icon in the menu bar can be hidden or displayed.  The setting is the system network preferences pane.  Where it says display, select AirPort.  There is a checkbox for the State of AirPort show the menu bar.  Since the AirPort icon in the menu bar, you can select the a local wireless network to join.

  This pane of system preferences, you can use the more specific configuration settings, although the default settings work often unless you use special parameters with your wireless router.

  AirPort Extreme Card maybe for 802.11b and gand not n.  If your wireless network is configured for 802.11n only, you will need to change this setting to allow to 802.11 g (on the wireless router).

• I have an older iMac with airport wireless card, but it does not connect to the internet.

  I have an older iMac with airport wireless card, it sees my network but will not connect.  Any suggestions?

  Exactly, what iMac, what version of Mac OS X running?

• C6380 Wireless will not install on my laptop

  I try to install the C6380 wireless - whenever I get to the printer part to find the facility, it indicates there is no printer on the network.  The priter config. page displays the correct network name.  I am using windows XP and have downloaded the patch to service.  Any susggestions?

  First step is to check that your printer is on your wireless network.  Using the IP address of the printer, if you can navigate the printer web page?  If you can't, then restart the Wizard Wizard from the printer setup menu.

  If you can browse the web page of the printer, you can consider uninstalling the firewall, run the SW installation and the re - install the firewall.  This ensures that the firewall is disabled.

  A final element is to add a reservation your router DHCP IP addressed printer wireless.  In this way, the IP address of the printer will never change after installing the SW.

  Best regards / Jim B

• Satellite Pro A300D - wireless issues

  I get real with the wireless on my laptop aged 2 months and wonder if it can be solved by an update of the driver or must be sent away. When I start the computer it does not detect wireless networks. Using the currency manager and deactivation and activation of the device used to help, but now he just said that he was able to start.
  The only way I can get it to work is to start, open a session, restart and then she comes on the first time.

  Someone previously had or knows how to fix this please?

  Thank you in advance.

  Dale

  Have you tried to reinstall or update the driver Wifi and updated the BIOS? Check the toshiba website http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Check your security/antivirus/firewall software, it can interfere with network connections.

  One option is to save your data and execute the recovery. If it still does not on a new image, the Wifi card could be defective.

• Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

  + Sorry for my English is not my mother tongue. +

  Hello

  I expose my problem:

  I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

  Configuration of the laptop:

  * Windows 7 Ultimate 64-bit (with all updates installed).
  * All the updated drivers correctly.
  * With the latest version of the BIOS.

  Router:

  * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

  The router configuration:
  * WPA2-PSK AES.
  * 802.11n
  * Maximum output power.
  * Channel: 11 (not automatic, that this channel is relatively free).
  * Width of channel: 40 Mhz.
  * Maximum tx frequency: 300 Mbps.

  Other information:

  The wireless card drivers are correctly then updated (ver. 5.60.48.35).
  * The router has updated the firmware.
  * I tried all the settings of the wireless card.
  * Bluetooth off (without interference).
  * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

  Thanks in advance,
  Greetings.

  Post edited by: Xibalba

  Have you tested using different channels?
  Have you tested speed WIFI connected to another router?