Installing LabVIEW drivers

Similar Questions

• 9.30 NIDAQ drivers not install LabVIEW 2011 - example. Microsoft .com's in LabVIEW 2010 under vi.llb

  I just upgraded to LabVIEW 2011 without uninstalling LabVIEW 2010.  I downloaded the last set of drivers DAQmx 9.30.  I find that these drivers are installed in a DAQmx folder under the vi.llb of theLabVIEW 2010 and NOT in the vi.llb of LabVIEW 2011.  The DAQmx features do not appear on the menus and the existing instances are reported as 'cannot be compiled. How can I get the DAQmx functions to properly install LabVIEW 2011?

  You must DAQmx 9.4.

  9.4 DAQmx

• POUVEZ, NOR-CAN1500, POUVEZ Labview drivers

  Hello

  I am currently using Labview 64 2015 on win 7 64 bit.

  When loading NICAN1500.exe (CAN labview drivers) it forces me to load it in the Program Files (x 86) folder. LabVIEW is installed in Program Files (without x 86)

  After loading it in x 86 drivers folder do not appear in the palettes.

  I loaded twice. Force suggested install NI of CMD did that and still forces me to load it into the x 86 folder.

  Help please.

  BR,

  Florence

  Well well, according to the white paper of OR you can use their drivers CAN on 32-bit LabVIEW only. The drivers themselves are 32-bit... It can run on 32-bit or 64-bit Windows 7, but the version of LabVIEW is limited to 32 bits if you plan to use CAN.

  I'm sorry.

• Comsoft driver needs to install LabVIEW?

  Hi all

  I am trying to install the drivers of comsoft after my installation of project, on the machine where LabVIEW is not installed, but it gives the error attached.

  I held the profibus drivers be installed on the machine because I need Configurator II. Installation will install configuration but it gives the error attached.

  In the installer, I already added LabVIEW Runtime, OR serial, NI VISA etc, but its still does not.

  Does comsoft PDS required driver on the system?

  Please let me know if anyone wants more information

  Concerning

  David

  Dear SanRac,

  Please find attached a ZIP file that contains a ".reg" - file to modify the Windows registry to prevent the installation program stops.

  I will send you the password on your email account, because the '.reg' - file is not for public use. Could you please send me your contact information to [email protected].

  Kind regards

  Sven Fischer

• Impossible to fully install LabVIEW 2010 on WinXP SP3

  Hello

  I tried many times today to install all OR Developer Suite 2010 helps install disks. I catalogged all items that not have installed. LV 2010 works but I don't know if everything works. Here are the elements and the order in which I wasn't able to install:

  'Crucial questions when National instruments drivers using Microsoft Visual Studio.NET 2010 resolved by NOR-PAL 2.6.5' - I have successfully installed this but the message still comes up and gives me a message "Are you sure you want to move forward", when I'm trying to keep the installation

  "NOR-USI 1.8.0" has not been installed. Error 1935

  Error "Runtime-NOR-LabVIEW engine Interop 2010" 1935

  "NEITHER AFW UI assembled" Error 1935

  "OR Measurement Studio 8.6 company for VS2005 Runtime" Error 1935

  "NEITHER AFW Channel Configuration Tool" Error 1935

  "NEITHER AFW assembled custom user interface" Error 1935

  "NI LabWindows/CVI 2009 Service Pack 1 Runtime Engine" - no error number

  No idea if I need these applications run LV 2010?

  Thank you.

  It seems that there is something strange going on with your .NET framework, which is the origin of this conflict of driver.  Try uninstalling your current .NET framework as well as LabVIEW (from Add/Remove Programs) and re-setup of the Microsoft .NET Framework page followed by a new installation of LabVIEW.

  A few other things to note:

  Make sure you have all of your anti-virus software / firewall disabled while trying to install LabVIEW.  We have seen this before due Setup error.

  Also, make sure that you install your drivers after installing LabVIEW.

• Not to install device drivers August 2015

  I have problem to install the latest device drivers of OR.

  I downloaded the 3 parts of the Web site OR. I ran each self-extracting executable file, without chaning any default option. The instructions say that, after the third part is made to extract, the DVD autorun starts. I choose to install the drivers and I keep all the default options. The installation works well until 95%, then it stops and it gives me this message:

  «Please insert the media labeled drivers of devices or August 2015 part 2»

  I can't go in front of her. I tried to point manually in the directory where all the files have been extracted, but nothing. I have re-uploaded part 2 (it automatically deletes it after extraction it) and I've changed the extraction folder by default so that it is separate. I did Setup to this folder and nothing. Finally I had to click on Cancel, which interrupted the installation of device drivers everything.

  What I am doing wrong?

  PS: this is OT, but seriously, why should I download almost 4 GB of things, check out it (and it takes forever on my very powerful work laptop), just so that I can talk to a single instrument via GPIB? I understand the simplicity of having a package that works for everyone no matter how simple or complex, their system is, but it becomes more and more ridiculous with each new version...

  I recently posted a thread where I discovered a problem and describe how to fix it.  Basically, the installer thinks there are two volumes and some installers are on the second volume.  By changing or replacing a few text files, you can convince the installer that all subinstallers are on the same volume.

  http://forums.NI.com/T5/LabVIEW/device-drivers-August-2015-issue-fixed/TD-p/3206936

• SMC100 LabVIEW drivers are considered to be "mark Points.

  Hi all

  I try to install the SMC100 device drivers

  The pilots of the SMC100 controller has been developed under LABVIEW 6.1.

  So I installed LABVIEW 6.1 also. runtime engine.

  I installed the drivers (in the link below) in the file "instr.lib" as requires it.

  FTP://download.Newport.com/MotionControl/current/MotionControllers/SMC100/software/

  When I open the schema-block (range of functions), the SMC100 pilots are considered question mark as in the joint photo.

  I use Win7 32 BIT, LabVIEW 2009, as well as

  * My camera always on the way from the USA to the Turkey, so I do not connect the SMC100 device my PC again. Is - this smthg to do with it? Should I connect the device to install the drivers?

  Try mass compiled file with the drivers.  If the drivers have been downloaded without the patterns of principle, then you will not be able to compile, because the source code is missing.

  Lynn

• How to install LabView Run-Time 2011 silently without removing daqMX?

  I'm trying to silently install LabView 2011 execution using the Agent HP Client Automation, formerly RADIA.  I tested successfully, however, the systems that installed daqMX have, I find that the silent installation program removes daqMX automatically.  Is there a command line argument or register defining who can defeat this behavior so that daqMX remains installed when the silent installation program is finished?  Thank you very much for your help!

  Hey EricJay,.

  I'm not very familiar with the Agent, HP Client Automation, but the silent installation should not automatically uninstall the DAQmx drivers. You can compare the process HP Client Automation Agent uses with a silent installation using command-line arguments, as described here. Another possibility could be any conflict check that the HP Client Automation Agent performs. As described here, we do not recommend installing DAQmx drivers until LabVIEW or LabVIEW runtime engine are installed to prevent contradictions or missing references. If HP Client Automation Agent is to detect these potential conflicts so we can uninstall the DAQmx drivers for conflict prevention. I hope this helps!

  -Ryan S.

• 'Lack of installation files' then install LabVIEW 2014 (Win7-64 on a VMWare system)

  Hello

  I try to install LabVIEW 2014 on a VMWare Windows 7 - 64-bit environment, with no luck.

  3-DVD installation media has been downloaded from NI.com, the release of August 2014 of the Site license academic (ASL), which my company is a regular subscriber, a very long time.

  (Interestingly enough, this same virtual system has fonctionnee LV 2012 without any problem whatsoever)

  Here are the steps I followed:

  -unzip the 3 iso files on separate directories on drive virtual, principal of this system;

  -Run setup.exe on the first directory (IE one that contains 1 DVD files)

  -Enter the serial number of the FSA

  -l' Installer leaves just selected default English 2014 LabVIEW and the Manager of Package of VI, so I expand the ASL Core Software to add NIDAQmx 2014, and I also selects the device drivers OR - August 2014

  -J' I accept different license agreements

  -I select "I am not the end user" to postpone activation

  Setup continues but almost immediately alerts telling me that it was impossible to install "NI Customer Experience Improvement Program", Yes , I want to keep and then I see a system dialog box display of files/paths that do not actually exist on the directory DVD 1, hence the obvious error 'lack the installation files"message. If I ignore this message, several other similar dialog boxes appear.

  Either by the way, I've done various research, but, right now, apparently not a popular question at all.

  Any advice?

  Problem solved.

  For some weird reason, WinRAR do NOT extract some files from the first archive .iso (but more importantly, she also didn't show absolutely no error message, leading me to believe everything was fine).

  When any further inspection, I found about it and made extraction .iso process everything again and this time to the installation program completed without fault.

• How to install LabVIEW 7.0 on PXI-8186 RT

  I try to install LabVIEW 7.0 in real-time on a PXI-8186 controller.  It took a lot of time to go through the process, and it still does not, so I write this message in part to help and partly to document which does not work for later use.  The controller provided with Windows XP installed.  I created a bootable Windows 98 (of http://www.allbootdisks.com/download/98.html) floppy.  I plugged in an external USB drive on the PXI-8186 controller.  The hard drive would be recognized only when the BIOS setting specified startup in Windows / other OS.  I brought to the top of the BIOS setting screen by pressing the delete key several times after turning on the chassis (hold the DELETE key and turn on the chassis do not provide the BIOS settings.  In the BIOS setting, I went to the tab 'LabVIEW RT' and changed the "Startup Configuration:" to "Windows / other OS.

  I then started using the Windows 98 Startup disk and ran Fdisk

  Using fdisk, I deleted the existing partition and creates a new main back partition with the size of the complete volume.

  I then restarted the computer, once again starting with the Windows 98 Startup disk and formatted the C drive with the command "format C:".

  "When the format was finished, I used MAX Version 4.5.0f0 and some tools of-> RT Disk Utilities-> create PXI Format hard drive.

  I selected the Version 7.0 in the dropdown menu, complete the initialization of the disk without any problems and then used the resulting so that it starts the PXI chassis.

  PXI started with the message 'Transfer control user program.' followed by a 11 lines from "WARNING KERNEL.346530: error initializing floppy A:" followed by a prompt to re - format the C: drive.  I typed "Yes".

  Then the following message appears:

  Hard drive recovery to start in o/s real-time...

  WARNING KERNEL.346530: Error initializing floppy drive A:

  WARNING KERNEL.346530: Error initializing floppy drive A:

  Change the drive target C:\hdmon.bin for a start.

  Copy the host hdmon.bin target C:\hdmon.bin...

  Error: Could not open source file hdmon.bin

  Impossible to set up the hard drive boot sector.

  At this point, I can enter the BIOS and configure the computer to start in LabVIEW RT and I get the following message:

  "Could not load the LabVIEW RT of the player!

  Boot mode safe of Romans...

  Enter safe mode.

  The IP address is: 0.0.0.0

  At this point, I can connect it to the chassis of MAX and assign an IP address.  I can also install LabVIEW 8.6 real-time without problem.  However, I can't get LabVIEW 7.0 installed in real time.  It is clear to me if in time real LabVIEW 7.0 must be installed using a diskette or by software 'install' button in MAX.  If I try to use the button 'Install Software', the only version of real time available is "8.6".  When I do "PXI Format hard drive", I see an option "7.0" or a "8.6".  Also, I tried to connect it to the chassis with 2 other computers, which have all two LabVIEW 7.0 installed in real time.

  I saw an article in the knowledge base that says that LabVIEW 7.0 is supported on the PXI-8186 (http://digital.ni.com/public.nsf/allkb/B35E022CF91F6EF086256E68005FBC29) controller and another link which explains that an additional CD can be used to install the software (LabVIEW RT software does not exist on the Local host for PXI-8186 controller: http://digital.ni.com/public.nsf/websearch/4655C86B65AE7A7286256E620004834C?OpenDocument _)

  However, this knowledge base made from 24/03/2004 and I have not received any CD entitled "The LabVIEW Real-time Embedded Software CD.  I got a CD "embedded controller OR ', but it was not obvious to me how to use it.  He has an "I386" folder and a "BONE" record on this matter.

  Any help appreciated.

  After a Chase, the CD mentioned in the knowledge base has been found ("LabVIEW Real-time Embedded Software CD").  I put this CD on a computer that had at the time real LabVIEW 7.0 and Max Version 3.0.2 in it.  The Setup program ran, I installed LabVIEW 6.1 and 7.0 support and the installation tree showed that the support would be added for PXI-818 x controllers.  After running the program, I was able to install the software for the PXI-8186 and things worked as explained in the knowledge base.

  The CD mentioned also ran on my laptop, which has MAX version 4.5.0f0.  However, you are using the latest version of MAX, I don't have the ability to install LabVIEW 7.0 in real-time on the PXI-8186 controller since the button to install the software.  I looked briefly using MAX, but I could not know if it is a bug with the latest version of the Drivers of OR or a voluntary choice of National Instruments for support not time real LabVIEW 7.0 in newer versions.

• get the message "setup.exe has stopped working" when trying to install labview 2011 or 2012 on a windows machine 7

  When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?

  Hi - are you getting it at the beginning of installation, during or after 100% progression ended?

  Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?

  This can be caused by the NVIDIA chipset driver:

  https://decibel.NI.com/content/message/46299?TSTART=-130

  Thank you
  Sacha

• Install the drivers for scanner and Fax for HP PC 2410 printer all-in-one

  I use a MacBook Pro with an operating system of El Capitan 10.11.4. I use a PC HP 2400 All in one printer/Fax/Scanner connected by USB to a network of airports Time Capsule. During the installation of the printer driver, the printer function to add printers and Scanners folder in preferences systems found the printer and installed the drivers. The same add function printers do not thin either driver Fax scanner. How can I load these drivers.

  Hello..

  Re download the drivers once again and then try to add scan and fax again drivers.

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Need help with installing the drivers on the laptop Satellite Pro

  I reinstalled windows xp with drivers Utiity chip, Lan, sound Driver realtic, ATI Display Driver, I can't put my computer on standby, which driver should I for this.
  Also, I went into the Device Manager and the following drivers are highlighted in yellow with a question mark.
  Ethernet controller (2)
  Mass storage,
  Bus modem device high definition audio.
  Video contoller, Vidio contoller vga compatible.

  What should I do to correct this? I'm a novice so would appreciate the answer explained in its entirety because I don't know computer Lingo

  Hi jeyjey2,

  Before starting the discussion on installing the drivers for your problems, post your model mobile exact. This is important because laptops are equipped with different hardware/drivers.

  Additionally, make sure that XP SP2 is installed at least.

• Satellite X 205 - cannot install audio drivers

  Hey!

  I have problems with installing the audio driver on my Satellite X 205 sli1. I tried to install the drivers from the realtek site, but they doesen't work. Then, I tried to install the patches 'kb835221' 'kb88811' and that the drivers but still nothing.

  I can't find the drivers on the toshiba Web site. In everest, I checked my audio device is - Realtek ALC268 @ Intel 82801HBM ICH8M - high definition Audio Controller PCI.

  Please help me!

  Hey Buddy,

  In my opinion the easiest way is installation of Service Pack 3 for Windows XP. It contains patches for cards high definition sound and the other important security fixes. You can download it from the Microsoft Web site.

  But SP3 or patches must be installed * first * and then the audio driver. Otherwise it will not work.

  So my recommendations, uninstalling the audio driver and clean your system using the freeware CCleaner tool. Restart your computer and make sure and install SP3 if it s does not. After that, install the latest driver from the Web to Realtek site.

  Check this box!