Screen goes to sleep in the cradle after 30 minutes.

Similar Questions

• Windows 7 - screen goes to sleep when the parameters of plan of power has never turn off

  Looking for some advice - we have screens that display information for visitors so that they must be all the time. The computers to which they are connected are on the network but connected with local accounts. We applied a number of parameters for the management of food, namely:

  Turn the hard drive off - never

  Sleep after - never

  Allow hybrid sleep - never

  Hibernate after - never

  Selective suspension of USB - disabled

  Turn off the display after - never

  Despite the settings above the screens go blank and I have to move the mouse or press any key to wake up. It doesn't seem to be any obvious either pattern. Sometimes they remain turned on for 1-2 hours then go to sleep, other times maybe every 20-30 minutes.

  I looked at several articles but could not find a solution that works for us. We tried to apply a GPO that defines power management in case something else might override the settings, but it did not work either.

  The computers are running Windows 7 SP1.

  Now I'm out of ideas. Any advice would be greatly appreciated.

  Hi Gary,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with power settings across computers connected to a network.

  The computers are connected to a domain network, it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Computer portable gel while in the cradle (after lost power)

  
  

  Hello
  You must update the bios http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-68451

  Version 7LETB9WW (2.19 - 1, 08)

  • (New) Support for ICH8 revision B2.
  • (New) Support for Intel AMT engine management region Firmware Update Utility version 2.6.4.1034 (or higher).
  • (Fix) The error, "0191 system security-Invalid remote change requested." can occur in the market.
  • (Fix) Some CardBus and IEEE 1394 devices can slow performance.

  Version 7LETB8WW (2.18 - 1, 08)

  • (New) Improved security features.

  Version 7LETB7WW (2.17 - 1, 08)

  • (Fix) The computer may hang while formatting disk ATA CardBus on Windows Vista 64 - bit SP1.
  • (Fix) The resolution of the external display screen attached to the docking via an analog display port will change during the operation of the dock/undock (NVIDIA graphics chip models only).
    • (Note) Install the NVIDIA display driver version 6.14.11.7471 or higher.

  Version 7LETB4WW (2.14 - 1, 08)

  • (New) Processor microcode updates.
  • (New) Update Intel memory reference Code.
  • (New) Update of Intel AMT 2.6 engine management region Firmware (models with Intel AMT 2.6 only function).
  • (New) Support for order of initialization of SSD (Solid State Drive).
  • (Fix) Startup error occurs during the initialization of the Intel ICH8M SATA.
  • (Fix) The 2100 (boot from hard drive 0 error) error code is displayed only occasionally after "Default Setup" is done in the BIOS configuration utility.
  • (Fix) The boot sequence is different from that provided for in the case of wake on LAN (WOL).
  • (Fix) Data memory can get scrambled during the startup of the system or out of standby/hibernation mode/power (models with Intel AMT 2.6 function only).

  Version 7LETB0WW (2.10 - 1, 08)

  • (New) Processor microcode updates.
  • (New) Added the new option of BIOS Setup to avoid blocking of the system even if the AC adapter is removed from the ThinkPad Advanced Mini Dock while the computer is attached to it.
    • How to activate: Configure Legacy devices on cradle Docking Station of Config ' Disabled' option in the BIOS Setup menu.
    • Note: A serial and a parallel port on the mini Dock will be disabled with this configuration

  Version 7LETA9WW (2.09 - 1, 08)

  • (Fix) Looks like a block of the system after continuous Fn - F7 knock on BIOS Setup or BACK. CBS could not handle many interruptions.

  Version 7LETA7WW (2.07 - 1, 08)

  • (New) Added new error code 1830 to indicate that only one card MEMORY is not installed in the location memory 0. Solution for error code: with only one card MEMORY, install the DIMM in the slot 0 memory (a different location of the consuming).
  • (Fix) Unexpected interruptions of the USB controller may occur.
  • (Fix) The system with the NVIDIA graphics chip may crash.

  Version 7LET56WW (1, 26 - 1.06)

  • (New) (Only for the models of Intel video) A design change that the screen is set to extended desktop mode, with an external display and the option "When I close the lid of my portable computer" in power options is set to "Do nothing", and when the cover is closed;
    • (Old) Extended display mode is cancelled and the video output is passed to the external display only, so the icons on the desktop will be moved.
    • (New) The extended display mode is kept and video output is not set, so the desktop icons are not moved.
  • (New) Improved function to capture the configuration information of the BIOS on the computer of the Capture/playback settings BIOS utility.
  • (Fix) The data of the hard disk transfer rate is slow in SATA AHCI mode.
  • (Fix) The computer may hang at the market, if the configuration of the device is changed in the BIOS Setup immediately after the resumption of the normal functioning of the hibernation mode.
  • (Fix) An error may occur in the market after settings BIOS ThinkPad for Windows is running and then the computer goes into hibernation mode.
  • (Fix) WMIMGMT. MSC fails to read the properties on Windows 2000.
  • (Fix) (ThinkPad T61/T61p only) Volume buttons and mute on the keyboard do not work under Linux.
  • (Fix) (ThinkPad R61 only) Menu of Intel AMT removed from the BIOS Setup: The Intel AMT menu is displayed in BIOS Setup on some models, although the Intel AMT functionality is not supported.

  Version 7LET51WW (1.22 - 1.06)

  • (New) Optimize the Quadro NVS 140 M models nVIDIA graphics card power management feature.
  • (Fix) Resume from hibernation operation may fail with Intel Turbo Memory on Windows Vista.
  • (Fix) Turn on the password may appear even though fingerprint authentication has been matched with the power on the calendar.

  Version 7LET51WW (1.21 - 1.06)

  • (Fix) Incorrect screen resolution can be configured when the system is docked on the docking station.

  Version 7LET44WW (1, 14 - 1.06)

  • (New) Additional OS supports the nVIDIA Quadro NVS 140 M for models.
  • (Fix) Unexpected display or the modes can be selected with dock on Windows Vista
  • (Fix) Resume operation may fail on nVIDIA Quadro NVS 140 M models.
  • (Fix) System performance may become very low if the hard drive (Serial ATA controller mode) is set to AHCI.

  Version 7LET40WW (1.10 - 1.06)

  • (New) Support for the new ThinkPad R61/T61 models.

  Version 7LET39WW (1.09 to 1.05)

  • (New) Support for ThinkPad T61 14.1 inch screen normal models.
  • (New) Support for ThinkPad T61 15.4 inch widescreen models.
  • (Fix) The screen display mode setting can mismatch on Windows XP.

  Version 7LET37WW (1.07 to 1.04)

  • (Fix) TrackPoint does not work after the undocking of the PS/2 mouse with docking station.

  Version 7LET35WW (1.07) (New) Initial version for the ThinkPad T61 and R61 14.1 inch widescreen models without IEEE 1394

• screen goes black instead of the newspaper showing

  Hi, I had a problem enough. This has happened right after that I restarted my computer.

  Load Windows, but just like your so-called self connection, screen goes black, not market not to answer any type of order. The screen is not active, it's still reciving a signal, it shows just a black screen.

  So I thought just run in safe mode and restore the computer to a point a few days back, but as I try to load safe mode, it gets stuck on crcdisk.

  So I figure I would use the vista cd to check for errors. The cd loads but just as it is supposed to show "icons" that simply shows bakground, don't smile icons.

  I had a problem of smililair once, but then the computer started just after 5 min of blackscreen, at this time there, I figured a windows update to be the cause(not sure though) (I also did research of virus lying right there, but everything seemed fine).

  I don't know how, but I left my computer on for the night, showing just a black screen. But in the morning he show would screen checking disk errors, it was 100% complete and says it all was ok, but it got stuck on this screen.

  Advice, ideas, suggestions?

  Hello

  You can try the following steps and check:

  Step 1:

  Unplug all external devices and tries to boot into normal mode and check if the problem occurs.

  Step 2:

  Since you can not boot from an Installation of Vista disc for troubleshooting more away, you can try to boot from the system pre-installed on your computer recovery options and perform a startup repair. If that fails, then try a system restore and check.

  For more information, see the link:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Hope this information is useful.

• PC goes mode sleep when the Power Options are set for ever, etc. also can not wake up

  Hi, I read the other posts on this topic, but my problem seems a little different.

  I am running Windows 7 on a Dell desktop computer and I tried to run chkdsk and also the Dell diagnostics that I have some problems hard drive; However, it gets so far and the pc goes into mode 'sleep' causing me even worse problems that chkdsk/diagnoses are halfway through a volume. The pc has done this on and off tension for awhile, but hopefully not when something critical is running, even if it is a nuisance.  I did all the steps recommended here as ensure my Power Options are set, etc., but he always does.

  In addition, when the pc goes to sleep, I can't wake him up by pressing the power button or any key on the keyboard.

  I've been in contact with Dell and they said that it's a software problem.

  Someone can suggest something else I can do (stop) the computer mode 'sleep' and also how to wake him.

  Thank you.

  Hello

  I'm sorry for the late reply.

  As you mentioned in your previous post, you wanted to know how to boot from the disc, I've provided the steps how to boot from the disc on my previous post. However, you can try to repair your windows using DVD for Windows 7 backup and check.

  You can see this Microsoft article below that will help you fix Windows 7.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Let us know if you need help most.

• Satellite C screen goes blank and only the visible mouse pointer

  Hello

  My laptop Windows 8 is a couple of months

  Today, when I try to start it shows the splash screen and then the screen turns black with only the pointer of the mouse showing.

  I can move the pointer on the screen, but windows does not load.

  What happens if you go to the BIOS by pressing F2 while turning on the laptop?
  You see the BIOS screen and all the BIOS settings?
  Could connect you external monitor to the laptop just to check the 2nd display?

  In which case it's just a software related issue, you should be possible to repair the system using the Toshiba HDD recovery or the Toshiba recovery disc.
  Have you checked one of the procedures mentioned?

  The comments appreciated.

• Screen goes black randomly while the computer is in use

  Original title: black screen, bursts short
  I have a new computer with Windows 7, I also have a LG FLATRON F700b MONITOR, I get some black screens with nothing, they had a split second and a quick acceleration of music they occur 5, 6, 7, 8 times in one minute, it does not affect type me, like now, I do not lose keystrokes. It happens from the moment I start with the screen saver, the machine is a not to be logged on to Windows or Internet, eventually becomes less a problem when the screen and M/c for awhile, but never seems to completely disappear. What I want to know is there anything else he can be cured by buying a new monitor? any info would be greatly appreciated

  Hello

  1. you hear the music when the blackscreen appears?
  2. did you last changes made before the problem started?
  3. have you installed any third-party screen saver?

  Try the following steps:

  Step 1: disable screen saver and check if it makes a difference.

  Refer to this link for help:
  Enable or disable the screen saver

  Step 2: update the drivers for your graphics card.

  Follow these steps to update the drivers manually:
  a. open the Manager of devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  b. in the list of hardware categories, click on the graphics card and then double-click the device name.
  c. click on the driver tab, click Update driver and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Surface Pro screen goes into sleep mode when it is connected even when put to execution and never Power Options sleep or screen dark

  It seems that the parameter is ignored.

  There is another hidden setting?

  Check your screen saver if it is always the case.  Happened to me and I have triple checked all my settings and my screen has been set to never when it is plugged in also.  Then I realized, there was an update and for some strange reason, some updates change your custom parameters and shows how to activate the screen saver and mine was set to 'white', which is what was causing my screen seem to be turned off... It was the screen empty screensaver, turn off the screen saver and... Alto... fixed!

• How to prevent my screen back to an automatic login page after 20 minutes

  greetings...

  I have problems with my screen automatically return a newspaper in the window after short periods of time so I have to re connect you to return to what I was doing of... the whant don't not having to constantly login over and over again... very annoying...

  suggestions...

  Thank you

  GBA

  greetings...

  I tried many suggestions pertaining to the evolution of the different power options but unfortunately none of them worked and the screen kept going back to a newspaper of the car on the screen...

  I've tried both - customization - referred to in the control panel where less - screensaver settings-i found an option "view summary, the log on screen '...

  This option was clicked on after 45 minutes, which is about the amount of time that could if pass before the log on screen appeared again and again each time... so i unchecked it and hope this solves the problem, because it's an accurate description as to what was going on with my screen...

  hope this information is useful to someone down the line... If by chance it does not work as well I will inform you of the case... and search for further consultations.

  Thanks for your help and reply fast/s...

  The best

  GBA

• Go to the first screen if no interaction from the user during a minute

  Hi all

  My application displays the screen connection at startup, the requirement is, if the user is on any other screen except the connection and there is no user interaction with the application for 1 minute, I'm supposed to navigate the user to the sign again.

  I could put a timer, but I'll have to do it on the screen throughout the application. I want to avoid this.

  Any suggestions how can I go to this topic?

  Any help appricated.

  Concerning

  Put the timer in your main.qml and reset each page, when occurs a user interaction.

• When I turn on the PC my screen goes to sleep no signal input.

  When I turn on my PC (HP Media Center m7690e CTO) looks like it is starting up, but I don't see anything on the screen because the monitor does not receive a signal. Please inform me of what to do to solve this problem.

  Hi Tania, you could try to remove the discrete video card and connect the monitor to the integrated VGA port and see if you can get a signal to your monitor.

  You may need to remove a lid on the built-in VGA port to connect the VGA/SVGA cable.

  If the monitor works normally, he would check that the discrete video card has become defective.

  Here is the link for your motherboard specifications.

• Screen goes neon colors in the Intel HD Graphics Control Panel

  This computer comes with a Nvidea 850 GTX + card 4 GB

  ------------------------------------------------------------

  Whenever I try to change the settings of the brightness of the Panel HD Graphics, my whole screen became unreadable pixelated and turns to the neon colors.  I can't read or see anything except pixels and neon colors when this happens.  This happens when I move the cursor, I don't even need to apply settings for making it happen.

  The only way to return to a normal view is to close my screen and open it upwards again.

  How can I fix?  I just got this computer after you send another a return for a hardware problem?

  Thank you!

  --------------------------

  UPDATE

  --------------------------

  This problem is no longer produced, please mark this as resolved.  I don't know what was the solution, I did nothing.

  Thank you!

  Hi @Emmaus7

  Thank you for visiting the Forums HP's Support and welcome. I think that a restart updated software that solved this problem.

  Thanks for sharing with us.

  Have a good week.

• Help! My MacBook goes to sleep when the disk (on the recovery partition) utility is running!

  Currently, my MacBook is initialized in the Lion recovery partition. I am running disk utility and try to reduce the main partition, so I can clone a smaller HD (Yes, still there is enough space on the smaller disk.) But I have a problem... my custody of Mac to go to sleep, resulting in a never-ending cycle of wake - sleep-cancellation. The progress bar is apparently stuck to half way through. I don't want to touch anything, for fear of making the disk unbootable. (Of course, it is possible that it is already in ruins, but...) But I also have other things to do; I want to stay here all day just to keep typing on the keyboard, move the mouse, etc, to keep my Mac awake.

  Never mind. Looks like disk utility is stuck, and nothing happened. After a reboot and a repair, the volume is OK, but not shrunk.

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.