binning error of Hamamatsu orca-dsquared

Similar Questions

• PCI-1422 and RS 232 control of a camera Hamamatsu ORCA-HR (HR C4742-95-12)

  Hello

  I'll have some incompatible problems when I try to control a camera Orca-HR (Hamamatsu C4742-95-12 HR) via RS232.

  I have a feeling that the problem comes from how the RS232 port emmbedded (emulated?) in the PCI-1422 is used or recognized by the various software that I've tested.

  So first, this port emulated/integrated should appear in the series, Max & list parallel port? I don't think, but he's not here, that's for sure. I have 'only' the projection of card PCI-1422.

  Case where I can access some of the attributes (accessible from limited functionality) camera:

  -By MAX I can change some settings so the snapshots of controller and make.

  -I can access these functions by IMAQ ('IMAQ camera set attributes.vi', etc. see Appendix vi example).

  -J' have a full control of the camera via the Hamamatsu Hipic 8.0 software, but only if I use the internal drivers and a different com port than those incorporated in the card PCI-1422 (Hipic offers not only port com in any case perhaps because there is no by saying?)

  Case where I can't access the camera at all:

  -If I try to use VI to a Hamamatsu (the most recent in sample screws & DLL or older version), it does not work: calls to any function of the 'tmcamcon.dll' return errors, pointing to the fact that there is no camera detected: the first sub_Vi (tm_initialize.vi) will return no error but zero connected camera and other screws return errors saying there is no camera using this handle, or no camera can be activated at using this handle.

  -I have NO camera control via the Hamamatsu Hipic 8.0 software if I use the DCAM API drivers no matter what com port (incorporated in the card PCI-1422 or other).

  Does make any sense to you?

  I just thought that the Hamamatsu screws cannot access the camera via emulation RS-232 of the PCI-1422. Is there a configuration setting, that I could use to those who do work and do not have to restart from scratch with IMAQ and with only limited functionality?

  Thanks in advance for your answers.

  Hello

  In fact, you can have access to the serial port integrated on the PCI-1422 map only with IMAQ functions.

  This explains that you cannot see in the section "Series and parallel" in MAX.

  I have not really well know PCI-1422, but there's probably a way to access the serial port on the card PCI-1422 in MAX.

  Camera attributes, you are able to access with IMAQ, y then the camera assigns the has camera driver.

  If you are able to access more attributes with Hamamatsu driver, it is the manufacturer who decided to restricted access to other drivers.

  But if you are not able to use the screw manufacturer, you should probably call him to find out why it works badly. Perhaps a version control problem or a update of the firmware?

• Distorted with Hamamatsu Orca HR?

  I use an Orca C4742-95 through machine vision experience.  I put two platforms in place, each of them have the same model camera hung.  Computers also use the same firewire card, a "Texas Instruments TSB82AA2 1394b OHCI-Lynx IEEE 1394 Host Controller" as tells me that the Device Manager.  Both devices use drivers provided by Hamamatsu with the revision of August 2011 of the DCAM API.

  When a camera is hooked up to the most recent computers we use, the image is distorted, if it is defined in 16-bit mode.  This is true with HCImage, the software that comes with DCAM-API, but also to channel OpenCV.  Here is an example:

  http://imgur.com/PsLKy

  The thing is, the problem is not with the camera - cameras, camera controllers and cables work fine on another computer.  Two computers running Windows XP, but it was recently commissioned and built (we have downgraded from Windows 7 to XP in case it is the question, with no luck).

  In HCImage, if I set it to 16-bit, it only works 2/3-ish resolution or lower - however he captures fine at full resolution, when the 8-bit value.  It seems to me that it might be a kind of problem of bandwidth at any given time, but this computer is new and much higher than the other, characteristics that is 6 or 7 years now (and can handle 16 bits at full resolution without any problem.)

  I tried for days reach the support of Hamamatsu, so I was wondering if anyone here had any suggestions or experience with this kind of question.  If someone knows a way to adjust the depth of bit to 8 bit by default (or if there is a call I can do via the API to do so; "I've been unable to find any documentation), which would help too, as I'm using OpenCV to capture the stream and we need a video stream to move forward.  Any help would be greatly appreciated!

  It is a common problem with FireWire cameras on newer systems. Basically, the problem is that chipset for FireWire OHCI (provided by only a few providers) generally have only a few KB of integrated buffer space. This normally isn't a problem for most applications that use transfer-style mechanism in bulk where there is control of the data flow and put in the buffer. However, IIDC FireWire cameras make use of an isochronous transfer mechanism where they transmit a packet every bus cycle regardless of whether the host can accept it or not.

  It is more hirt because over the past years, the latencies on PC bus transfer (as PCI vs PCI express) have got more time. This increase in latency is due to various design decisions that support the overall throughput to latency. In addition, the push to lower the power consumption of these bus high speed means they use aggressive energy saving technologies to put links to sleep when they are inactive and the CPU itself makes aggressive energy savings. These techniques all them increase latencies for certain types of transactions. This is usually not a problem for the flow of transfers that use flow control, but can cause problems for isochronous transfers as FireWire uses.

  One thing you can do is try to disable some features on your energy saving system. For example, Windows 7 allows you to change all your power system management strategy. You can activate the maximum performance profile, and this tends to disable things like sleep States CPU and on links PCIe ASPM. You can also check and see if there is some power saving features you can disable in the BIOS.

  In addition, on some with graphic systems integrated, the update of the display can use a lot of band memory bandwidth and compete with the firewire to a strip card system memory bandwidth. Disabling the interface Windows Aero has been known to help in certain situations.

  Point Grey has a article of really good support which has some great info that should apply to any provider so cameras:

  http://www.ptgrey.com/support/downloads/documents/TAN2010003_Image_tearing_causes_and%20_solutions.p...

  Eric

• Recycle Bin error that the disc is damaged

  I have a Windows 7 system that has 2 discs. 'E' drive is shared for a peer-to-peer network store files, but I get an error when files are deleted recycle Bin on / E: drive is corrupt I click ok and the message disappears. I tried various remedies like remove the trash but it always first appears

  How to repair a trash corrupted in Windows 7 and Windows Vista
  http://www.Winhelponline.com/blog/fix-corrupted-Recycle-Bin-Windows-7-Vista/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Not able to do a restore via F8 due to IO error

  Hello

  My labtop worked very hard. Explorer constantly freezes even in safe mode. I was able to boot and logon windows 7 64 bit, I could open this computer but when I click on any drive windows explorer crashes, restarts or windows crashes. I was advised to run a chkdsk /f and it runs, but the problem persists. I was advised to run a SFC/scannow, is not able to run completely after 33%, that it is said that he is not able to run completely.

  The Council is to run a recovery via F8 it starts, but I got an error (in Dutch, I try to translate it as well as possible).

  This error is caused by a wrongly disconnected USB device as a storage material defect or external

  Status: 0xc00000e9
  Information: There are bin error an unexpected i/o

  Has anyone an idea how to solve this problem?

  Otherwise, I should go the manufacturer as tells me that the rest of the message.

  Kind regards

  Leo

  I can't say for sure, but I think the HARD drive is a troublemaker.

  You have maybe packed recovery DVDs? If Yes, value default BIOS settings and try it please install recovery image.
  I think that you will be facing the same problem again.

  At the end, I must say that the best solution for you is to contact the nearest Toshiba service provider, explain the situation and ask for help. I put t know what model number you have but if the warranty is still valid let them trouble this hardware related issue.

• I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too.

  Original title: recovery Partition

  Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:

  Dell, Program files users tools and windows sources.

  The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you

  I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...

  I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.

  I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.

  Maybe you'd wait for people with better computer skills to help you.

  Thank you.

• Using the file error

  We have added a Netgear storage device to our home network and I am connected via Ethernet.  We have two computers using the storage, a desktop running XP and a laptop running Vista.

  The XP computer can write, delete, update and rename the files.

  The Vista computer may create files but cannot update these files.  I receive the file in use error when I try to update files with Photoshop, Word, and Excel.  I get Recycle bin error when I try to delete using Lightroom.  Lightroom says also "failed to rename" if I try to rename the files. Explorer Windows gives me an error of file already open when I try to delete or rename. I think I have a somehwere of permissions on Vista computer problem but I ran out of places to check.

  In Windows Explorer on the root of the storage device, right click and click Properties.  Go to the Security tab.  Add your name to the list of authorized users and give you all the rights and don't forget to check the box to apply it to all the files and subdirectories as well.  Then click Advanced and do essentially the same thing in the special permissions section.  Make sure that the special permissions section does not deny access to all user - if so, change it to allow access (at least read only, but no matter what type of access will make - if rejected, this entry overrides everything else).  While in the Advanced section, click the property tab and you make the owner of the car (and new check box to apply to all files and subdirectories as well).  This should solve the problem.  If you are unable to perform the tasks (you're stuck on a file or folder), try to change the folder or file directly and once done restart the whole process.  If you can't, move it temporarily to the reader until you have done the rest and then go back and try again to change - especially if it's the folder or file you are talking about.  If you still have problems with this file/folder and the following articles didn't help, after return by explaining exactly what happens or does not happen when you try to change it and I'll see if I can identify a reason and help fix you.

  Here is some additional information about the permissions and ownership in the case where you have problems or you want more details about procedures:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If this does not work, check the network settings.  Here are some articles that may help:

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here is an article on the networking of the different versions of Windows:http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows.

  I hope this helps. If necessary, start from scratch using these procedures and see if that helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error while executing script root.sh on the nodes at the RAC 11 g installation

  Hello friends,

  Here, I face an error while I run the root.sh script. During the installation of grid RAC, he asked a few dependencies of prereq. There are several .rpm files that were the prerequisites for this installation. I ignore them and I continued the installation. Now, he finally threw an error when running root.sh script. I tried to install several .rpms acquisition of information from the internet, but always this script does not work here.

  Please, suggest what should I do at this point.

  

  You guys could help me out here, how I need to go further.

  Simple google search will give you missing RPM. try to install and see if that solves the problem

  https://gruffdba.WordPress.com/2012/11/06/11gr2-grid-install-clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

  Don't forget, you need up-to-date existing deconfig install and run root.sh as mentioned below article

  https://desaitaral.WordPress.com/2011/06/13/Oracle-Linux-6-1-and-libcap-so-1-cannot-open-shared-object/

  Another article with the same question - https://taliphakanozturken.wordpress.com/2013/03/02/clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

• How the user is serving Recyble bin system

  Hi all
  
  I want to empty the Recycle Bin of scott as a user 'SYSTEM '. Because I don't know the password of the user. How do I get there?
  
  
  
  SQL > purge scott.recycle bin;
  purge scott.recycle bin
  *
  ERROR on line 1:
  ORA-38302: invalid option to PURGE
  
  
  Thank you very much
  
  Kinz

  If you have saved data in 100 storage then you need to run 100 times.

  Until unless you saved explicitly in other tablespace, all your data will be saved in default tablespace itself.

  so download scott default tablespace and purge this tablespace with user scott.

  order form below gives you where all the data of the user scott.

  Select nom_tablespace from dba_segments where owner = 'SCOTT' group by TABLESPACE_NAME;

  If the output is more then 2-3, better to say scott users serving instead of spending you time on it.

• want and tried installing 3.6 on an OpenSuSE 11.2 -: wrong ElfClass64 /usr/lib64/libdbus-glib-1.so.2 - what to do? Thank you very much

  uploaded to. 3.6 and tried to install
  ...
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 # ls
  application.ini components dependentlibs.list greprefs libnspr4.so libnssutil3.so libsoftokn3.so LICENSE plugins searchplugins
  .autoreg crashreporter dictionaries icons libnss3.so libplc4.so libsqlite3.so modules README.txt Throbber - small.gif
  blocklist.XML crashreporter.ini libfreebl3.chk libnssckbi.so libplds4.so libssl3.so files extensions removed mozilla-xremote-client update.locale
  Crashreporter BrowserConfig.Properties - firefox libfreebl3.so libnssdbm3.chk libsmime3.so libxpcom.so res platform.ini override.ini updated
  chrome default firefox-bin libmozjs.so libnssdbm3.so libsoftokn3.chk libxul.so plugin-container run - mozilla.sh updater.ini
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 #. / firefox
  . / firefox-bin: error while loading shared libraries: libdbus-glib - 1.so.2: cannot open shared object file: no such file or directory
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 # mc
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 # s /usr/lib64/libdbus-glib-1.so.2 /usr/lib/libdbus-glib-1.so.2 ln
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 #. / firefox
  . / firefox-bin: error while loading shared libraries: libdbus-glib - 1.so.2: evil class ELF: ELFCLASS64
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 #. / updater
  Use: updater < path-dir > [parent-pid [work-dir reminder args...]]
  linux-User251868:/usr/src/packages/SOURCES/firefox-3.6 #.

  I don't want to depend on and if OpenSuSE updated to 3.6 - actually before using OpenSuSE 11.2 I had installed firefox 3.5, which has updated automatically, sort of b-Tester, as I trully trust firefox for browsing on the day the day for years.

  Firefox is a 32-bit application, you will need to create a symbolic link to the 32-bit version of this library of dbus (libdbus-glib - 1.so.2). If this library is not installed, you must install it via the installation of the software.

  See also http://www.mozilla.com/firefox/system-requirements.html - Firefox 3.6 system requirements

• Try to include external jar in Eclipse IDE, but it does not work

  Hello world

  I try to use the BB for Eclipse plugin.  I saw the other posts in the same direction as mine, but nothing seems to solve the problem or the person was referring to an older version of the plugin.  I try to include a jar named J2meMap_lib_cldc11.jar.  Here's what I've done so far:

  I created a new Blackberry project called J2MEMap.

  I right-click on the project and select Properties.

  I go to the Blackberry project properties. Click on the Application tab.

  Under Project Type, change in library.

  Then, I go to the Java Build Path.

  I go to the library and add the jar as an external library file.

  Click OK.

  Then, I create a new Blackberry project named MyApp.

  For this one, I'm doing a moped.

  In the Java Build Path, I add the J2MEMap project as a project dependency.

  First thing I notice is that MyApp has compilation errors because he doesn't seem to find the jar file in the other project.  If I look in the Console of the Blackberry manufacturer, I see the following error when I Isaiah to compile the J2MEMap project:

  C:\programs\opensource\eclipse\plugins\net.RIM.Eide.componentpack4.5.0_4.5.0.16\components\bin\launcher.exe C:\programs\opensource\eclipse\plugins\net.rim.eide.componentpack4.5.0_4.5.0.16\components\bin\rapc.exe-silencieux import =...... \.. \.. \.. \.. \programs\opensource\eclipse\plugins\net.rim.Eide.componentpack4.5.0_4.5.0.16\components\lib\net_rim_api.jar;...... \.. \.. \.. \.. \programs\opensource\j2memap\sdk\cldc11\J2meMap_lib_cldc11.jar library =... \J2MEMap\J2MEMap warnkey = 0 x 52424200; 0 x 52435200; 0 x 52525400 - sourceroot = C:\Local\develop\eclipse\workspaces\psu\J2MEMap\src C:\Local\develop\eclipse\workspaces\psu\J2MEMap\bin
  Error! : not found of course
  CAP has failed for the project J2MEMap

  Previously, I did not receive this error, but I began to acquire a reason any.  I am able to generate the Midlet example that comes with the JDE and deploy and run on the Simulator.  For some reason, I can't get libraries to work properly.

  Thank you

  Eric

  In fact, I thought that I'm answering my own question in case someone else has the same problem.  In the library project, I had to go to the project properties and go to the Import/Export, and then select the external jar as one of the elements that must be exported.

  Thank you

  Eric

• password of the credentials of the TEST not found in zip - import fails "MAC verification failed."

  Hi people

  I just installed the version of 'LiveCycle ES' trial available as VMWare ESX-Server image (which uses JBoss) and tried to import the ReaderExtensions credentials.

  The instructions to http://help.adobe.com/en_US/livecycle/9.0/samples/ServiceUsageSampleReaderExtensionsDynami callyApplyRights.html say that the password of the pfx file downloaded inside the zip http://www.adobe.com/go/reader_ext_cert is written to the text file - I can't find any password in the zipped txt file.

  When you use "password" as the password import fails indicating

  MacData.MacData: MAC verification failed - content PKCS #12 cannot be read or decoded (bin error code: 259, hex: 0 x 103)

  any help welcome!

  Best regards

  irgei

  Uh, the password is in the zip file.

  I opened the zip file that you linked and there two files it contains.  A 0007421_Exp_03312011.pfx and 0007421_Exp_03312011.txt.  Open the txt file.  The only thing that it is the password.

• root.sh script fail to run on OEL5.4

  Hi, I am trying to install a network infrastructure for a stand-alone server on Oracle Enterprise Linux 5.4. I have a problem when I run root.sh script by user root is not run successufly is the "error loading shared libraries" error please give any soluciton.
  
  Here is the run the root.sh script
  
  
  [root@ws1 OraGrid11gR2] #./root.sh
  Run the script root.sh from Oracle 11 g...
  
  The following environment variables are defined as:
  ORACLE_OWNER = grid
  ORACLE_HOME = / opt/grid/OraGrid11gR2
  
  Enter the full path of the local bin directory: [usr/local/bin]:
  Copying dbhome to usr...
  Copying oraenv to usr...
  Copying coraenv to usr...
  
  
  Creating/etc/oratab file...
  Entries will be added to the/etc/oratab file according to the needs of
  Assistant configuration database when a database is created
  Finished to turn the generic part of the root.sh script.
  Now root product-specific actions will be performed.
  2009-11-02 18:18:28: verification of superuser privileges
  2009-11-02 18:18:28: user has superuser privileges
  2009-11-02 18:18:28: analyzing the host name
  Using the configuration settings file: / opt/grid/OraGrid11gR2/src/install/crsconfig_params
  Create the trace directory
  /opt/grid/OraGrid11gR2/bin/ocrconfig.bin: error while loading shared libraries:/opt/grid/OraGrid11gR2/lib/libclntsh.so.11.1: cannot restore segment prot after LAN: permission denied
  Cannot create or upgrade OLR
  
  
  Please give any solution

  Give it a shot...

• Error code: How can I get an item in the Recycle Bin?

  I can't put a webarchive into the trash.  Error message says, "the operation cannot be completed because one or more required elements was not found (error code - 43) how can I get the item in the Recycle Bin?

  reset

  then try again.

• Error 1 has occurred to C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data

  Ok... Seriously I'm banging my head against the wall here.

  I'm using LabVIEW 2011 SP1.  VideoMASTER 3.1!  I have compiled mass screw on the 2011 folder.  It does nothing good.  2 machines to put up with the same versions of LV and VMS.

  I use the VBF in Image file VI niVMS to convert .vbf files to jpg.  I browse to folder of waveforms in the public domain for VideoMASTER and select the native C:\Users\Public\Documents\National Instruments\VideoMASTER\Waveforms\480p RGB OmniGen.vbf file.  I then monostable it in the same folder as the jpg file.  I get the following error:

  "Error 1 occurred in C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data.

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: command requires GPIB controller charge controller. »

  On computer A, I do NOT get this error (in fact, everything works fine for all files).

  On computer B, I get the error.

  Do the same for the vbf HDMI file in the folder of waveforms and it works very well.

  Do the same for the 480 p file, but a bmp file and no error, however the bmp file is corrupted with no data.

  I need to know what is happening in the bowels of this dll.  Maybe I'm missing a codec on Machine B?  It seems that I'm missing a dependency for this file type.  If so how would I know which?  VMS I reinstalled several times.  I copied the dll over the Machine A.  I checked is NOT a licensing problem.

  Any thoughts?

  Thank you

  Jigg, with some quick research, it seems that the accident that you see can be related to do not call the niVMS function initialize before VBF to picture file feature.  Please try to run each of the screws after the launch of LabVIEW 2011 and see if you get the same results, and also adding the Initialize works in your code solves the problem.  If so, it seems that it will be your workaround solution, but we will also file a bug report; crash is not an expected way to treat this condition.

  Edit: Also, if you have other versions of LabVIEW, 2012, etc., which you can compare run this code, we would be interested in the results.

  Thank you