BIOS cannot detect the drive msata

Similar Questions

• Satellite L450 - 173 BIOS cannot detect the HARD whil eLinux disc that ubunto can

  I have a Satellite L450 173.
  The system will display a failure while trying to detect the hard drive then cannot boot from the hard drive.

  However, it can boot from the CD and install ubunto 11.04 (with barrier).
  However, after the success in the installation process, the system cannot start...
  Is this a Bios problem that require an update?

  Hello

  * Question: *.
  Either classified and recognized in the BIOS HARD drive?
  On the first page of the BIOS disk HARD should be listed with details such as the name and the size of the HARD drive.

  If his list, then you must run a HARD drive test. You could test the HARD drive by using a freeware tool called Drive Fitness Test.
  This tool is free and can be downloaded from different pages
  To do this, and if there is error, it means that your HARD drive is malfunctioning.

• EliteBook 6930p: elitebook 6930p BIOS cannot detect the wlan.

  Hello, after that new bios update ATI F.20 my laptop cannot detect wlan. In the bios it shows no. DAMAGE. Please help me.

  Hello @KipsasLTD

  Thanks for posting on the HP Forums.

  To get your question more than exhibition I suggest you post in the trade forums since the Elitebook 6930p is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP EliteBook Notebook PC 6930p

  I hope this helps!

• Cannot detect the drive of DVD Inspiron 660 s

  I think I uninstalled accidentally my DVD player, but basically, I do not see it in the Device Manager and cannot imagine a way to locate even via my computer.
  Any ideas as to what I can do?
  (Windows 7 btw)
  Thank you

  Do you see the drive in BIOS?

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• Cannot install network printer on Windows 7. Detects the printer then it says cannot locate the driver. All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions? How can I fix it?

  Cannot install network printer on Windows 7.  Detects the printer then it says cannot locate the driver.  All my vista and XP machines have no problem finding drivers. It is a 32-bit 64-bit vs questions?  How can I fix it?
  Windows Server 2008 network.  Printers have ip addresses. Install the drivers from the Print Manager.  /Terminal Server Workgroup installation.

  It's the same situation with XP.  The print driver names must match.  If you notice the name of the printer driver that uses XP is a name different from the one that is installed when you plug in the device on the Windows 7 computer.  This is just my assumption, please correct me if this isn't the case.

  The real solution is to install a 32-bit driver on the XP machine that uses the same name that the 64-bit driver and share a printer using this driver or find a 64-bit driver that uses the same name as the 32-bit driver installed on XP and install the driver on XP.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• After dismantling Satellite A60 cannot detect the CD/DVD drive

  Hello

  I opened my laptop to clean-up and it was the first time that I never opened a laptop. Messed up at the opening of the cd/dvd drive.
  Instead of just pulling out, I started its opening screw but quickly realized that this is not the right way. So I took it out. Rest of the disassembly procedure went well and I assembled it back but he little silver r 2 bands and a small source, which I'm sure that belongs to the CD player and I couldn't adapt it.
  And I don't know how it fits.
  The computer does not detect the drive. Although I can open it by clicking on the Open button, then he hang out by sharp object. (The light will blink showing the power exists in)

  The second thing is the microphone. I've never used until last week, but my voice is going through. The system does not detect any microphone.

  Help appreciated

  Hello

  On this path, it is not easy to say what is the problem with CD/DVD player. Are there signs of the CD/DVD drive in Device Manager or the drive is not displayed in Windows Explorer?

  How did you test mic? Try it with the tape recorder for windows. So you can test the functionality of the mic on the easiest way.

• Satellite L40 - installation of XP cannot detect HARD drive

  Hi, Toshiba support

  I have Satellite L40 - 18Y (PSL48E-03702NAR) with Windows Vista

  I want to install Windows XP, but I can't because my HDD is SATA and installation of windows XP cannot detect the HARD drive.

  I know that I have to update my BIOS.
  I have 2 files on Toshiba drivers download

  I downloaded their extract them & try to update the BIOS one. After that, I log in the BIOS
  I can't find (HARD drive Mode) must Mode IDE.

  How can I solve this problem?

  Hello!

  > How can I solve this problem?
  I think you find hundreds of discussions in the forum about this please use the forum search!

  A BIOS update is not necessary to install Windows XP. You only need the SATA drivers you can find in the Intel Storage Manager driver package that can be downloaded on the Toshiba site. Pilots must be integrated during the XP installation with an external floppy drive or use you nLite to create a new installation disc.

  Anyway, check this link from Toshiba which is an order exact step by step installation:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Good bye

• HP DV7-3063cl laptop PC: BIOS cannot locate the serial number of the new motherboard more PXE - E61: Media test failure, check

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  However, I have several problems:

  1. The BIOS cannot locate the serial number of the motherboard during the boot process and sends a message to the effect. I hit the ENTER button start continues.

  I tried to access the BIOS to enter the serial number or other possible solutions, I found online. Help forum a HP had a BIOS software tool for editing of Compaq in 2000 but said it would only be on the desktop and HP staff will provide a BIOS for my laptop.

  2. I get two error messages that

  • PXE - E61: Media test failure, check cable of

  • PXE - M0F: Exit PXE ROM

  I didn't know all the patches for this issue, but it only delays the process of starting shortly before it continues.

  Finally, the computer starts Windows, but other problems.

  mhscholder,

  There isn't any publicly available method to update information in the BIOS.  HP only authorized service providers can update the MB after installation.  You will get this message during boot every time.  You also won't be able to run a recovery since the recovery media is looking for this information.

  The PXE errors generally occur during the initialization of the network is listed in the boot order before the hard drive.

  -wes

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 39 XP on dat72 tape driver code - cannot install the driver

  Help! In an IBM computer running Windows XP Pro SP 3 I am looking to replace a defective DAT72 IBM (Seagate) drive with another band DAT tape drive - the replacement drive came from Dell, but it's the exact same Seagate drive. For some reason, the new tape drive is first detected as a Seagate drive, then askes for a quantum qdatwin.sys file - the former disc one driver IBM). I downloaded the latest drivers for Quantum, Dell and IBM, and any driver I install I get the same message that "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I should mention that when I started this process trhe CD player had mysteriously disappered. I had the Code 39 error on the CD player as well at the time - but not on the tape drive. I went to States support of info on it and choose the "have them fix it" (or whatever it is) and it did fix (problem of CD which is). Now it seems I have the same problem with the Unwinder - but I can't find any info on how to fix this. Also, I tried resdtorign the computer at a checkpoint before the problems started - not question how I chose, I get the same error Windows cannot restore to the restore point - choose another. I tried 7 different restore points with the same results. I ran a full antivirus scan who come clean. Furthermore, I use Acronis backup software that does not all drivers of his own band - it relies on the drivers for the tape drive. Everything worked fine for a good year before it happened. At the end of my rope here.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?