BIOS & CPU Support for a1250n

Similar Questions

• Satellite Pro C850 - 1 H 8 - upgrade the BIOS CPU support

  Hi there are people.

  I'm wandering if there is a possibility of upgrade of the i5 3230 m which is currently in my Satellite Pro C850 - 1 H 8.

  Looking at the options available in the decision-making FCPGA988 and chipset Intel HM70 there seems to be a variety of the i7 available for use.

  The laptop supports processors with a TDP plu max than 35w?
  The bios supports all the CPU upgrade options?

  Cheers, Nick

  In this forum, you will find various discussions on the theme of CPU upgrade.
  I found this one:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=75073

  Paolo and Macius posted some information about the situation of CPU upgrade.
  As you can read in another thread, the CPU upgrade isn't supported. Updates can be made at your own risk, and no one can say if CPU supported by the chipset would be supported by the BIOS.
  Test it if you want, but it's at your own risk.

• Windows * support for Pavilion ZV5000 machines

  There will be (bios?) support for installation of win 8 on a ZV5000 laptop or are they just dead?

  THX

  MattGinOK

  Thank you

  MattGinOK

  Hello:

  Given that HP has no BIOS support or drivers for the zv5000 for Windows Vista or Windows 7, I think it's very safe to say that they don't provide any support for Windows 8 either.

• 850 - 009na M1Z34EA #ABU: CPU fan for the 850-009na feel like Phoenix does not turn down after the power - on self test unless the BIOS is entered

  Hello

  I have posted responses to other posts on this topic, but thought I'd start a new thread to gather my conclusions. I'm sorry for a trial

  This PC is virtually brand new (only a few weeks now) and otherwise perform exceptionally.

  Basically, if the machine is disconnected from the power grid (i.e. the power is off at the plug or the power cord removed), when the machine is supplied then the CPU fan turns over 2000 rpm and stays there. All the other PC that I do this too, but the fan will slow down after turning upward. I know that this is done as part of the POST to check that the fan is running.

  If I go into any installation of seed, start-up or BIOS for example (i.e. by pressing ESC or F10 etc.), the fan will slow down immediately up to 700 rpm. It will stay like that until the next time the machine is started against the cold. If I shut down the PC - watch or stop - but do not cut the power supply, then the next time the machine is started, the fan is still about 700 rpm. It is not to turn up to 2 k + RPM when lit.

  As soon as I unplug, then the next time the PC boots, it will turn to the top and I have to repeat steps - off, boot, enter the BIOS, exit and continue. It is something to do with the cold start.

  Note that I don't have to do anything in the start menu - I for example go to the BIOS settings, exit without saving the changes, and the fan will still slow. It's going in the boot sector that slows down the fan.

  When the PC started out-of-the-box, I opted for the upgrade to Windows 10 during installation. I have read in various places that people had experienced after the upgrade, so I reset the machine to factory settings (Win 8.1) and have not upgraded, but the problem persisted. However convinces me that Windows 10 has been removed completely, as when I went to restore the backup image (i.e. dating back to what I had before the factory reset) there are references to 10 Windows (for example, it says 'Continue to Windows 10' as well as various food options). I do not understand UEFI so I don't know if that was involved.

  I tried to change the power plan options "Processor power management-> cooling system strategy" on the liabilities side, but no joy there.

  I think that the fan and sensors work, based on the findings below. These readings of temp and fan are taken from AIDA64

  After starting cold (current was cut, without entering the BIOS), machine runs dry without load

  

  Exactly the same thing--starting in cold, but go in the BIOS, do nothing and continue. Once again, no load

  

  This is after power off and resarting, but to let the PC network

  

  After the above, I used Prime95 to put the CPU support (use of 95-100%), and after an hour, the readings are:

  

  Note that even so, the fan was not particularly strong, but it's at 2222 rpm as in the first reading.

  If I play at 4K (the whole point of the PC ) the CPU so far got very warm, the GPU is but his fan turns up as planned.

  In conclusion, it seems that the POST has a problem because it does not slow down the fan after the test.

  I can live with let the machine always plugged into the sector (for example, most of the time) and I guess that's what most people do, but I would like to know what the problem is (for example if it's really something 10 Windows, or a bug in the BIOS/UEFI)

  Thank you very much!

  John

  Explain you a lot of people who maybe have returned their system immediately because of this? Others might judge normal sound. Not irritable average is not coming here to complain. Others might judge her so little. They simply don't like. You will never convince me that is not a BIOS problem. As the problem resolves itself when you enter manually each time. It can be reproduced every time.

• Support for Compaq SR5310F CPU

  I have a Compaq SR5310F desktop computer with a 2160 cpu c2d.  When I checked that the specifications for the cpu upgrade for this machine, I was advised he could accept a Pentium D 9xx and 960 was the highest.  When I got the Pentium D 960 and installed the computer reported it was not supported.  When I look in the CMOS, it is visible, but when I try to use the computer with the installed processor it just turned off.  There is a bios update for this machine or can I just have bad information of HP?

  This is the original factory specifications for the desktop Compaq Presario SR5310F. According to the specification, this model came with an Intel Pentium E2140 to the factory. Also, the specifications indicate that the following processors are supported;

  Type of socket: 775

  Core 2 Duo E4x00 with Dual Core (Conroe) until E4400 technology

  Pentium E2000 series (Conroe) until E2160

  Pentium D 9xx Dual Core (Presler) powered up to 960

  Pentium 4 series of 6 x 1 (Cedar Mill) up to 661

  Series Celeron 4xx up to 440

  Celeron D 3xx series (Cedar Mill) up to 365

  Celeron D 3xx series (Prescott) to 355

  The Core 2 Duo E4000 series is the best, while the series Celeron D300 is the worst CPU supported.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• Need bios and firmware for the HP system

  I have an older HP Pavilion Elite e9280t - product # AW020AV-ABA.

  It runs an Intel Core i7 CPU 920 @ 2.67 GHz, with a map of TRUCKLEE 1.04E01 system.

  System BIOS is 5.24

  Given that HP is no longer support these older systems, does anyone know where I might be able to locate the last good firmware and updated the BIOS.

  Thanks in advance.

  @fridaythemovie

  Card BIOS update mother IPMTB-TK improves support for Intel Core i7-980 X Extreme Edition processors system and solves the problem with the suspension system when you enter in the mode 'sleep'. "Version 5.29.

  http://ftp.HP.com/pub/softlib/software12/COL35997/PV-88834-1/sp49903.exe

  Your other drivers here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-elite-E9000-desktop-PC-series/3999455/model/4066664

  REO

• Satellite C870 - 1 H 2 and support for virtualization

  Hello

  I am (was to) buy a Toshiba Satellite C870 - 1 H 2 (from amazon.co.uk).
  The specifications look ideal for me, but at the last moment, I thought to check if VT - x extensions are supported.

  I know that the processor supports extensions (as detailed here: [http://ark.intel.com/products/71465/]), but I know also that the extensions are often not enabled (or there is no option in the BIOS to enable them).

  The expression "Virtualization Technology" (which is present on other pages of the specification) is clearly absent from the plug laptop here: [http://www.toshiba.co.uk/discontinued-products/satellite-c870-1h2/].
  I saw some comments that suggest the Satellite * Pro * series usually provides the support for virtualization, but it always seems to be missing on many current models of Pro's specifications.

  I don't know why the C870 would not support VT - x, when we know that his material, but the specifications indicate that this is the case. On the other hand, I found no references to people complaining about the lack of VT - x support.

  So my question is, the Satellite C870 - 1 H 2 actually does support VT - x, or not?
  (and if not, because it takes just a very small piece of code BIOS, why not?)

  Thank you

  > The same issue applies. These models are supported virtualization

  VT support is always depends on the CPU built in Notepad. But you mentioned it in the first post.
  According to the page of the Ark from Intel, the Intel Pentium 2020 M processor supports Intel Virtualization Technology (VT - x)

• This Bios is not for your laptop!

  First I started having this massage of error at startup 'System Fan (90 b)'

  I searched HP's site and found several tips to resolve this.

  one of the tips was to check your Bios version and to the most recent update.

  I followed the steps carefully.

  1 check my bios version / date.

  2. check my cpu model.

  3 open the HP website and let it detect my laptop model (and it does correctly).

  Laptop HP ENVY 14-2136nr
  Model: LM764EA #A2N

  4 select my operating system (Windows 7 X 64)

  5 - Check the Bios Driver and download it.

  6 - everything seemed perfect and once I try to install the driver I get this massage of error (this bios is not for your laptop!)

  HOW IS IT?

  HI @ibraham-hashem.

  I see that you have a laptop of HP ENVY 14-2136nr and that you receive 90b fan error. One of the suggestions is update the BIOS, but when you tried you have received the message that it was not for your laptop.

  First of all, I ran the HP Support Assistant to help with updates and solve problems.

  Have you checked against viruses and malware?

  I try to restore the bios, and then retry the update. Restore the BIOS

  If it is not successful, I would go to the bios screen, and when you look down, you should see an option to restore the default values.  Please restore the default values.

  Now, try to install the update to the bios.  Updated the BIOS

  I hope this helps.

• Satellite Pro P100 - support for 4 GB of RAM in Win7 64 and Intel Virtualization

  Hello to the members of the forum,

  I have the Satellite Pro P100 (PSPAHE - 002001GR) and I installed the WIN 7 Enterprise 64 free trial. I have Modules of memory 2 x 2 GB Corsair, a T7400 processor and Bios version 4.7. Everything works fine without their memory. Known BIOS all 4 GB, Windows see it uses but only 3 GB. I know im not alone with this problem, but I have not found a solution to solve it. In msconfig, all right, there's max, and the number of processors. RAM not activated.

  If someone knows a way to work to use all 4 GB of installed Ram?

  I would be much obliged if anyone can help.

  Something else. Intel VT - X is not enabled by BIOS. Also, there is no option to do this. When I bought the laptop it is a feature that I want to use, and now the BIOS does not support it. Why didn't pay much for the laptop so characteristic specific card do not work propably?

  Thanks to everyone for reading my post and want to help.

  SOFC

  Hello

  Perhaps than that you seem stupid now, but I think that this model laptop was never supported for 64-bit operating systems, and I think the BIOS is also not designed for this.
  If you wish, you can call Toshiba nearest service and ask for help. They have access to the database of Toshiba and they can check it for you.

• What hard drives are supported for Satellite 5100-201

  Hello!

  My drive is making some strange noises, might he have one foot in the grave...
  Have the latest bios 1.9. and the original at 30 GB disk.
  Have a Hitachi 40 GB I tried with, but the laptop did not.
  So I would like to know what drives and formats supported for this model.

  Thanks in advance!

  Hello

  Very strange did you use a compatible 40 GB HDD?
  To my knowledge, the laptop must be able to recognize the 40 GB HARD drive.
  As far as I know the 30 GB HARD drive that was installed is a Toshiba MK3017GAP and the computer supports a HDD of 20, 30, 40 or 60 GB.

  I think that these disc HARD must be compatible:
  Toshiba HDD2171B 40 GB HARD drive
  HITACHI G8BC00009110 40 GB HARD DRIVE
  Toshiba HDD2183B 60GB

  PS: The strange noise from the HARD drive could be the beginning of the end
  So make a backup of the data.

• Bug BIOS PCI found for Equium A110-233 during startup

  Hi all

  I get an error of "PCI BIOS bug found" when that I start my Equium A110-233. It gives a number, but the error flies by so fast, that I'm not.

  I have not noticed errors running the computer except that my SD card reader does not work, but because I am under that Linux Ubuntu Gutsy Gibbon was based. I am aware that Toshiba is not supported for the drivers for this device.

  How bad are errors of BIOS bug? It needs fixing?
  I can query the operating system to find out the bug number BIOS / details?
  Can it be fixed with a BIOS update loaded via the Windows emulator or virtual machine?

  Thanks for all the ideas in advance.

  Hello Rob

  You can use Windows XP Home edition on your laptop with no problems?

• Where to find a list of processors that are fully supported for my laptop?

  I need to find a list of processors that are fully supported for my laptop, my laptop is a HP PAVILLION DV7 3090EO, im trying to change my processor for a new and need to know what processor taking care of my laptop.

  Thank you

  Dalatoni

  Hi Dalatoni,

  Looking at the Page 84 of your Service and maintenance Guide, there are only 2 processors compatible with your laptops card motherboard/Bios.

  Kind regards

  DP - K

• Re: BIOS 1.7 for Satellite M30 (PSM30L)

  Dear Sirs,

  I am trying to improve my BIOS of 1.4 to 1.7 under a platform of Windows 7.

  I right click installation file and choose ""run as Win XP SP3"and selected""Run as Administrator" ".» "" File was extracted but happened "' user is unautherised to install the bios. Please tell us how can I upgrade the bios under Windows 7.

  Satellite M30 is the old model of laptop and not designed for Vista or Windows 7.
  If Windows 7 is not supported for this model of laptop.
  All offered stuff like updating the BIOS or tools and utilities will run under OS supported only.

• Satellite A100-290: new BIOS allows support Core2Duo?

  Hello

  I found a new bios for my A100 - 290 (PSAA8E) published 07/25/06.
  I can't find any description for the new bios and what features added werde.

  The new bios allows support Core2Duo?

  THX, best regards,.

  Sebastian

  Hello Sebastian

  Unfortunately there is no list of which is fixed with the new BIOS update. If your laptop runs stabile and you have no problem to leave it as it is.