BIOS settings - Satellite M30

Similar Questions

• Can I go back to my old BIOS settings - Satellite A100?

  My laptop (SATELLITE A100 - 225 PSAA9E - 03U01EEN) started disconecting my router wireless (for 5 seconds at a time every 5 minutes or so) since I updated my BIOS on Toshiba update page.

  How would I go back to my old BIOS settings?

  Thanks in advance, Genghis.

  Hello

  As far as I know it is possible, but this must be done by service. They can install old version of the BIOS using special tools.

• Missing BIOS settings Satellite C660

  Hey everybody,

  I use my Satellite C660 Notebook for some productions of music and I try to get my extern Interface Audio Presonus working. Everything is fine so far except some occasional crackling sounds in the audio interface. After correction of some things in Windows 7 which have been recommended by tech support PreSonus these noises were still there.
  Tech support then gave me the following advice:

  + "There is some power options that can be changed in your BIOS that can be the cause of the noise you are experiencing. +

  + CPU settings section - Intel SpeedStep is set to normal. +
  + CPU - Turbo in normal not turbo mode settings section. +
  + Settings section CPU (if any) - CPU operation Mode will be 3 settings, Normal, fast, Extreme (?). Set it to 'Normal ' +.

  + Power Settings:-C1E Support +.
  + Power Settings:-C3E Support (if it is there).

  + Save the BIOS and reboot. +

  + Generally overclocking the processor as the iSeries can cause the CPU power to fluctuate causing problems with noise on audio devices, is a new discovery and we write a FAQ which will be available on our knowledge base may have a detailed description on the reasons why this happens on overclocking CPU. +

  "+ Make sure that the overclocking settings have been set to normal. +

  * For the first time I entered the BIOS to see that neither of these settings can be made on this Toshiba Satellite c660.*

  Or can they be somehow still made? Are there tools, programs,...?

  I hope someone can help me with this. Thank you.

  MikeL

  Hello

  If the parameters are not available in the BIOS, you will not be able to change or appear in the BIOS.

  Phoenix BIOS would be used by different manufacturers, but the BIOS is always modified by manufacturer and configured for each series of laptop.
  This is why the special parameters are not always available in every BIOS.

  I read in the forum of presonus on crackling using processors dual core.
  A guy could solve this by using a different USB port.

  Then maybe you should test all available USB ports.

  Another option might be the use external USB hub connected outside power source now quite sure if it would help to get rid of these noises but its worth a test.

  Last but not least you could test this with adapter connected and disconnected

• Satellite M30 742: update BIOS issue

  Hello

  I have a Toshiba Satellite M30-742.

  The BIOS does not recognise my new NEC optiarc DVD RW AD - unit 5540 a. so I need to do a BIOS upgrade.

  Can someone tell me where can I get BIOS more recent (I currently v1.40) and how the procedure is done?

  Thank you in advance.

  Concerning

  Maybe you don't need to update n the BIOS but a CD/DVD player compatible and taken in charge? ;)

  Not all CD/DVD slimline drives are compatible with laptops due to different master/slave/c-salt settings.

  I is recommended; buy a compatible player and don t flash BIOS because this willnot help!

  A hint more; If you try to update the BIOS with the bad BISO or bad procedure the laptop motherboard could be too bad!

  So be careful dude!

• Satellite M30: How disable the BIOS boot password?

  Hello

  Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

  Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.

  THX,

  Werner.

  PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.

  Hello

  I found a step by step explanation to clear a BIOS password:

  "Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

  Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

  Press the F1 key. This will start the device in the BIOS Setup mode.

  Using the arrow keys or tab, move to the password field and select REGISTERED.

  Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

  Hope this will help you.
  Good bye

• Satellite R830: How do the BIOS settings password protected?

  Hi all

  I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

  Can someone tell me how to access the BIOS at startup settings upward?

  Hello

  You can set the BIOS settings by setting the BIOS password.
  If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

• How to enter the BIOS on Satellite U200 settings?

  How can I get into the BIOS menu until windows has started?
  When the laptop starts up, I press F2 so he give chose device which need to read.

  In my other pc I push DEL and the BIOS is here.

  I have the Satellite U200. I have software called and write BIOS version 1.10.04/03/2004

  There must be key to enter the BIOS settings.

  To wear? s manuals I na? find information about entering the BIOS settings.

  [email protected]

  Hello

  To enter the BIOS settings, please press the ESC key at startup upward. After that, press F1.

  By the way: when you start the laptop for a moment you can see the message how to enter the BIOS settings. It is displayer downstairs left at first upward.

  Button led will be used on desktop computers, not on laptops.

  Good bye

• Re: Satellite C850 and UEFI BIOS settings

  I have laptop Satellite C850 - 1 2 with Windows 8.1

  When I boot, it shows a toshiba logo, not the original flag 8 Windows. It is not so much a problem, but I can't change because the parameter is blocked within the parameters of the UEFI. How can I change this?

  I already tried to change through the windows in different ways, but each time it will change the UEFI!

  Help?

  To be honest I don't know what to do, you mean with blocked settings, but it can be changed in the BIOS settings.
  What you need is to make complete OS stop http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm and after having done that, you can restart the laptop and enter the BIOS (try F12) settings and then you can change all the settings of the BIOS.

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• Satellite C55 - A - 19(d) - how to enter the BIOS settings?

  Hello

  I recently bought a * laptop Satellite A-C55-19 D * with no operating system preinstalled, so I installed Windows 8.1.
  My problem is that * I can't get to the BIOS menu *.
  I turn on the computer, but I can't see any invitation to "press F2 to enter setup". I get only a screen that has just the + Toshiba Leading Innovation > + notice, then the Windows 8 points of spinning...
  I could type or hold F2, F12, ESC, DEL, but nothing is coming. I also tried to press the Fn + F2 key combination.
  What I have to enter the BIOS setup?

  Thanks in advance!

  Proceed to a complete stop as described here - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After that restart your laptop, and then press F12. There you should be able to enter the BIOS settings.

  Check it out.

• Satellite A300 - BIOS settings incorrect error during recovery

  Hello

  New to the forum, I had a search around so im hoping someone can help me.

  I have a Toshiba Satellite A300 PSAGCA and trying to resize a partition my computer become unresponsive and since then I can not load Windows Vista. When the computer starts it comes up with the error "interrupted operation: insert the Recovery CD.

  So I used the restore CD that was with my program of partition but I get a different error message saying "Incorrect BIOS settings change video buffer size" which I cannot find in the BIOS and no help from their support.

  If im now doing a Toshiba Recovery and restore my laptop, but I can't get into recovery. Holding F8 during startup to show the boot advanced options, or not taking '0' as ive read its supposed to.

  Any help would be appreciated!

  Thank you

  Can you please tell me how you tried to resize the partition?

• Re: BIOS 1.7 for Satellite M30 (PSM30L)

  Dear Sirs,

  I am trying to improve my BIOS of 1.4 to 1.7 under a platform of Windows 7.

  I right click installation file and choose ""run as Win XP SP3"and selected""Run as Administrator" ".» "" File was extracted but happened "' user is unautherised to install the bios. Please tell us how can I upgrade the bios under Windows 7.

  Satellite M30 is the old model of laptop and not designed for Vista or Windows 7.
  If Windows 7 is not supported for this model of laptop.
  All offered stuff like updating the BIOS or tools and utilities will run under OS supported only.

• Satellite M30 - update BIOS

  Help, how do my satellite M30 BIOS?

  The procedure described by toshiba, indicates it takes to copy the update diskette 1.44 ", but the PC does not support this drive... !

  How do I?

  (i)

  As far as I know every Toshiba laptop supports external USB FDD. Do you have a?

  In any case, I checked the Toshiba BIOS download page and there is a BIOS update available. This is the version 1.70 and this is the version of WIN. WIN version means that it can be started under an operating system and you don't need a floppy drive.

  What version of BIOS you have now?

• Satellite M30 - user not allowed to update the BIOS

  I have a Satellite M30 (204, according to me, model 60 GB 1.6 GHz) and I try to update the BIOS but get the error message the "the user is not allowed to update the bios. The reason why I'm trying to update it is I just bought a 250 GB hard drive, but the BIOS does recognize that 128 GB and I guess the most up-to-date BIOS will allow the drives of this size, although I have not found any documentation for precise to say so be it.

  Someone at - it a patch to update the BIOS (I don't think I have a usb floppy drive drive anywhere) or to access the full capacity in other ways? Thank you.

  Ainsworth

  Hello

  could you please tell me what operating system you´re to help? I guess that Windows Xp...

  Usually, the update of the BIOS routine has absolutely NOTHING to do with the capacity of your hard disk drive. You are working with a limited user account? If not, I suggest right clicking on the BIOS update file and choose the option "Run as..". Subsequently a windows pop up and you ask under which user you want to run this program. Click on the "Next user" radio button and choose the administrator. If you have a password for your admin account and then type in, otherwise it should start automatically.

  Welcome them