BIOS update issues

Similar Questions

• BIOS update issue on Satellite 3000 x 11

  Hello
  I found a lot of people complain about this same issue.
  I have found no solution posted. Most (now locked) son is completed by people who say 'don't update your bios is running well.

  This computer does not work well and I'd like to update the BIOS.

  The problem is that the update of the bios said it failed because the update is only not for this model of computer.
  The laptop is a Satellite 3000 - X 11. I downloaded the update of the BIOS v1.6 for the Satellite 3000 - X 11
  So I don't know why he made this complaint.

  Please let know us if there is anything more I can do here.

  Also note the BIOS update procedure I followed was exactly according to the instructions.

  Thank you

  Jonathan

  Can you please my why you need again so laptop BIOS works OK? What do you expect will happen after doing this?

  I ask this question because I found too many people who, after updating the BIOS, want to have the old version.

• Re Bios Update issues: how to disable the touch screen on the x 360 Pavilion

  I applied the recommended bios update yesterday and now the touchscreen active almost continuously when I do not use it.   which makes it pretty useless mouse too.   I know that HP will release a bios that resolves this problem later, but in the meantime how do I disable the touch screen?

  Thank you google for helping me solve my problem

  http://Lifehacker.com/disable-your-laptop-s-touch-screen-in-Windows-8-1-1588333600

  now can someone let me know once an another bios update solves the problems of touchscreen presented the last of them?

• Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

  1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
  But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

  2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

  3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

  Thank you. I hope that my post is OK like this instead of three different positions.

  1 take a look at the other Tecra 8100 models to determine which processors are compatible.

  2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

  3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

  Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

• Envy 17 t-j100: ENVY 17 t-j100 games for 5-10 seconds all lag a few minutes/Bios Update issues

  I just bought this laptop rarely used a few days ago.  He had a clean recovery of Windows when I picked it up and I spent a few days in day and to learn to play well together (Leap movement, fingerprint sensor, etc.)  I've updated absolutely everything I could to the latest drivers and finally sat down to play games.

  Here's where my problems began.  I installed Skyrim and Portal 1.  Initially, I put the properties graphic high heat, since that is the recommended setting and tried to play.  The game started quickly and the graphics are superb.  I played for about 10 minutes and the video started trolling and I could hear the shift in the audio as well.  I stop, rebooted and the same thing.  I put the graphic quality for low on both games and still the same problem.

  I read that it is often caused by overheating, so I checked the cooling fans and vents and both are clean.  I also confirmed that all the fans are working.  I also read that this can be resolved by updating the bios.  I tried several times via HP Support Assistant and have so far failed.  It downloads, installs, flashes, restart, picking them up at the old version.  Very frustrating.

  I bought this camera as a desktop replacement that I am hoping to use for the moderate game.  I really hope someone can help me.

  System information:

  HP ENVY 17 Leap Motion SE NB PC

  F1J39AV

  8.1 Windows 64-bit

  Intel Core i7-4702MQ @ 2.20 Ghz

  16 GB of Ram

  NVIDIA GeForce GT 750M 2 GB

  2 TB HARD DRIVE

  I'm running it on current alternative, using the NVIDIA card exclusively and have every setting I can find High Performance value.

  Nope.  Off CoolSense, crank all the settings to ultra, even downloaded the HD texture pack and it works very well.  CoolSense was my problem.  I don't usually use it on a flat surface and I guess CoolSense wobbly.  HWMonitor to verify time and there was a NET improvement of cooling without CoolSense.  Thanks for your time, but this laptop is now shouting through games at high resolution.

• Keyboard and BIOS update issue on Satellite L505-13V

  Hello, I have two problems with my laptop.

  First is related to the keyboard. It started a few days ago, the laptop has wound down due to low battery, when I turned on it again once, I received a bad operation of the keyboard.
  The main problem is that when I type for ex 4, it appears on-screen as r4, and so on for some other keys.
  I ' v wanted by web it may possibly be due to the BIOS. And decided to update to the current version.

  And here's the second problem:
  I downloaded the update to the bios from the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Could someone please help with questions?

  Hello

  > I got a malfunction of the keyboard.
  What message did you receive exactly? This message based on Windows or what exactly?
  Of course, it could be a malfunction of the keyboard but software as well. Way simpler to check this must connect an external keyboard.

  > I downloaded the update to the bios of the toshiba site and tried to install it, but it stops on the last stage, something of the region.
  Where did you download this patch exactly? This update specifically for Satellite L500-13V and PSLJ0E model series?

• Portege Z835 - need help with BIOS update

  Hello.

  I have a Portege Z835, with a battery problem: do not load. The battery indicator says "3% connected load" but it doesn't load the battery.

  Some forums said that the solution is updating the Bios. I have a Bios Update v.1.60 ready to install. When I try to install, we get the message "the battery power is not enough.

  My power cord is still connected. If I unplug the power cord, the laptop is turned off.

  Please, what can I do?

  Thank you.

  F.

  To be honest I don't think it's the related issue of the BIOS. AFAIK battery must be charged, even if the laptop is turned OFF so why BIOS update if the battery can not be charged at all.

  To me that sounds like hardware related issue.

  How old is your Portege?
  Warranty is still valid?

  Maybe you should contact Toshiba service and ask for help or even their opinion.

• Problem of Tecra M5 BIOS update

  I downloaded the file from the Toshiba site and now have P003Fv370.exe. Race that happens just with "update of the BIOS is not supported OS, unsupported operating system or service pack is installed". I was under the impression that it was independent BONES? Please help, I need to update to stop it crashing and blue screening me every half hour. I have already installed the value-added package.

  I have a Toshiba Tecra M5 PTM51E
  Running Windows 7 Enterprise
  Current installed BIOS is version 1.70

  I also read somewhere on the installation with a USB key, if someone could help I would appreciate it. Thank you.

  Post edited by: deleting
  Just tried again and it says "Could not create"C:\TOSHBIOS. " UPD file! "I don't know what is happening more.

  Hello

  The P003Fv370.exe is a package.
  Right click on that package and select unpack here.
  Now you should see the other folders inside this .exe package.

  From my knowledge, it takes a file that starts the BIOS update.

  If it won't work, I guess you need the original preinstalled system Toshiba update BIOS.
  The other hand I n t think that BSOD appears due to the old version of the BIOS.
  I guess that the update does not solve the problem.

  Maybe the BSOD appears due to a problem of critical software or hardware issues so would be really interesting to know if the same thing happens with the help of preinstalled Toshiba system

• Dead by Satellite A500-1pj after involuntary Bios Update

  Hello world

  A friend of mine bought a new PC laptop toshiba Satellite A500-1pj a month ago. Windows 7 pro 64-bit pre-installed.
  Also preinstalled: support software toshiba who - correctly - configured search automatically and installs updates and critical fixes.

  Last Sunday this wonderful software recommended an update 'critical' to my friend - she's no expert but a user experienced who can make the difference between an update of the bios (and avoid this!) and a security patch, she agreed to download and install what she believed to be a security update.

  Sure, she gave permission to an update of the bios being installed. During the process of updating the machine froze completely. She waited for three hours and then pulled the plug. Guess what: the machine is now completely gone. Does not display without fan, simply nothing.

  Hotline support Toshiba told him that his cell two weeks old is not under warranty because this warranty does not cover software 'problems and the Bios updates are software upgrades.

  The company repair says a repair will very probably equal to buy a new laptop so here we are...

  My questions:

  (1) the laptop is a Satellite A500-1pj (PSAR9E-01M00QGR) fitted to a phoenix UEFI bios (bios toshiba/phoenix, 1.1.26 update tool is pretty radical - no warning at all! he tried to update me my computer dell laptop, lucky!).
  I found some posts on older machines that can be reflashed using a usb disk, hot spare bios back and a combination of keys (Fn + B or Fn + F...). is it possible to do this with a UEFI bios too?

  (2) anyone out there have the same problem?

  (3) any chance of toshiba help us with that issue and prevent others from making the same mistake to understand at least a warning in their bios updates?

  Thanks for your help!

  Tony

  > The company repair says a repair will very probably equal to buy a new laptop so here we are...
  I doubt that
  I think that the module ROM BIOS was flashed incorrectly (don't know why) and therefore you can not start the laptop.
  This can happen for different reasons, maybe that the update process was interrupted due to a process running in the background, etc.

  In order to solve this problem, the ROM module must be flashed again using a special crisis disk BIOS... that's all.

  The update of the BIOS is always a sensitive procedure but if everything was done correctly, then update the BIOS must successfully complete.

  I found this very interesting and useful to Toshiba and HowTo doc correctly updated the BIOS!
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  I would recommend contacting a local ASP (authorized service partner Toshiba) in your country. Guys will help you!

  You will find here all the FSA all over the world:
  http://EU.computers.Toshiba-Europe.com-> supported downloads &-> locate an authorized Service partner

  Good luck

• Satellite M100 - no speakers sound thorugh after BIOS update

  Hi all

  I have satelite M100 PSMAAA-02006 with XP. I just updated the Bios on V3.0. Speakers do not work after update but the audio jack works so with headphones I can listen to but not through Laptop speakers and the keys to media on top of keyboard play, pause, stop, next, back, etc. homepage react too much.

  Someone knows the solution to this issue. Or is it possible to get the old BIOS? Although I not sure aboutt previous version.

  need quick help. Please answer as soon as possible.

  Thanks & best regards...

  Hi Julie,.

  I doubt that this was due the update of the BIOS. Is that what you have loaded default settings after updating the BIOS?
  Have you chosen the correct BIOS update?

  Normally you can hear the sound on the speakers laptop if you disconnect the headset. Make sure that the sound is not muted, you can do this with the FN + ESC key combination.

  About the multimedia keys, I would recommend reinstallation of Toshiba common Modules. You can find it on the Toshiba site.

• Satellite M100-165: screen dithering also after BIOS update

  I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
  http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

  I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
  Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

  P.S. The LCD Panel seems to be a SEC5643

  Hi guys

  If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• PAVILION NOTEBOOK 15 K7Q21EA #: SCROLLING WINDOWS PROBLEM AFTER BIOS UPDATED 10 (08/03/2016) PAVILION 15 YESTERDAY 16/10/2016

  CANNOT CONTROL THE SCROLLING. CURSOR DOWN TO THE LOW WHAT MAKES IMPOSSIBLE TO SAVE TO A FOLDER

  Hi @STICKMAN5124,

  Nice day! Thank you for your participation in the Forums of HP Support! It is a great location to get resolutions and interact with experts from the community. It will be a pleasure to help you.

  I saw the post and understand that after only a bios updated cursor drops down due to a problem of scrolling.

  Impressive work, do the update of the bios. Kudos to you for this. It is a privilege to work with tech-savvy and technically competent customers like you and we greatly appreciate your business with HP. You have been great to work with.

  Please check in F2 diagnostics if the scrollbar works correctly. If Yes, then you can update the chipset drivers and http://hp.com/drivers touchpad drivers you can also consult with a mouse external further isolate the issue.

  You can also run diagnostics on the touchpad from this link by going to the UEFI F2 diagnostics: http://support.hp.com/in-en/document/c03467259 please run the complete components. If any component fails, please note the failure code. This is done to determine if the problem is hardware or software partners.

  If it passes and scrolling works very well, please perform these updates. If you are still having the same problem on page F2 UEFI (screen) then you could roll back bios after performing a hard reset. Link for the hard reset: http://support.hp.com/us-en/document/c01684768

  • Please perform this step to roll back bios.  Hold down the "Windows" key and the letter "B" at the same time, then press the power also button for about 5 seconds at the same time.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• HP Pavilion BIOS update

  I bought this laptop in December with 10 Windows installed. A few weeks ago I started to receive a notification in Support Assistant update THE system BIOS.  No matter how many times I run the update of the notice persists and never recorded Action log this update took place.

  After having checked with this Forum, it seems that other users have had problems with the updates to the BIOS and HP Support implemented warned against updating the system BIOS, unless there is a compelling reason to do so.

  1. because I am not having any issue that could force such update, should I simply reject the notification?

  2. If such an update is not advisable, why Wizard displays its notification?

  3 dismissing the notification would make this sensitive laptop security vulnerabilities?

  4. the instructions on the site of HP update BIOS theSystem are considerably more complex than the procedure launched from support Assistant. Exactly what is it?  The update to Wizard help Softpac number SP76353, Version F.19Ap1, size 8,89 MB.

  Hi @LAB7,

  Thanks for posting HP forums!

  I read your post and wanted to help.

  I understand that you have questions about the update of the BIOS. I agree that if there is no problem with the current system running, it is not necessary to update the BIOS. However, HP support assistant will fill the notification as soon as there is a newer version of the BIOS. You can reject the message and it won't cause security problems.

  There is another way to update the BIOS, by downloading it from the HP support page. You can put the number of your product here on this link: http://support.hp.com/us-en/drivers. Choose the right operating system on the page, it will show the drivers to your model, including the BIOS update.

  Hope that these could help. Let me know if you need more assistance.

  If this post helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Re: NB520 - buttons on the touchpad does not work after BIOS update

  Got my NB520 yesterday and installed all windows updates, and then the BIOS updates proposed by the action center of Toshiba and after that the two touchpad buttons have stopped working.

  They did before. Any ideas whats happened, this is the update of the BIOS?

  I put t know if its the related issue of the BIOS, but if there is no way to get buttons working again I recommend you reinstall the OS using the recovery mode. Test the functionality of buttons with the factory settings.

  By the way: touchpad works properly?
  You can use an external mouse correctly?
  Have you checked all the settings of the touchpad?