Black borders even after having filled the exact dimensions

Similar Questions

• Why even after having changed the permissions can't write to my files?

  I moved files on "users / shared" on the imac 27 "my father Yosemite retina.  He got last June but was not able to migrate because of her old imac was in Florida and North Carolina.  So, I migrated the old imac again with time machine backup charges a few months after getting the computer.  Now, I'm trying to merge the 'old' on the new computer account with the migrated account 'new', I restored it with time machine from the old imac.  I thought I was smart "passage" large libraries of film and photo of users / shared and that the account migrated from old imac. (on the same computer again) But I have no write permissions for files on the migrated account.  And making matters worse, while I can't write to files, I'm still able to corrupt them trying to change permissions and try to load them with i-movie and what not.  So now, I have a 6 GB corrupted movie library and not backup.  I tried it duplication and corrupt also.

  So my question would be "why is it when I add to the new migration full privileges to user for these files, I always failed to write about them?  Now instead, I wonder if there is a way I can fix the corrupted film library file.  Film - I tried and failed on the double.    I tried available i-movie file to 'all' as well as the addition of the new migrated user full privileges to it.  While I was able to do it without error (it seems to take the changes) or the new migrated user or former user on the new computer can write to the file (i-film library) at this stage.

  Every article help I read says just to click on info and change the privileges for what I did.  So I'm pulling my hair out.

  Hope that I was not too confusing in the way that I want to talk about the two different accounts.

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Save and exit feature available in FF6, even after I adjusted the browser.showquitwarning

  Firefox 4 and later versions Save the previous session automatically, so it is no longer need for the dialog box asking if you want to save the current session.
  
  Use ' file > leave "or" Firefox > Exit "(Mac: ' Firefox > quit Firefox") If you want to restore multiple windows.
  
  You can use ' history > restore previous Session ' to get the previous session at any time.
  
  You may need to click the Firefox orange/gray button to see history.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox/tools > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• Black on opposite corners of picture after having dropped the camera

  I have an EOS 6 d with a 24-105mm lens. I dropped everything so that cross a road in the middle of a two-week vacation and it bounced around a bit but has been virtually blown off. When vacation finished and I looked at all the 2,500 photos on the computer, about 15 of them have been simply like the one below - two dark corners in front of the other. After these 15 photos with dark corners, there is no recurrence in one of the photos. I don't seem to remember take off the lens and put it back on again about a day after I dropped the camera. Someone knows what are the black corners? I have nothing to fear in the long term?

  

  Looks like as the sun visor turned a bit (just a bit of loose).  You probably correctly tightened later.

  These lens hoods petal protrude further on the top and the bottom on the sides because more of the image of the round lens gets thrown on top.  If you fail to turn it completely around until it clicks with the long petals at the top and at the bottom you will see little bit catty corner black shadows, whose petals appear in the image.

  When I opened my 35mm Sigma at Christmas, I jumped the hood on and took some shots. I thought that the lens was defective because it looked like your shot above, but I had actually just not enough tightened the hood all the way to the click.

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• Keep the edited video even after expiry of the trial FCPX?

  I'm in my trial period of FCPX.  Once I finish my video editing, can I download it from a site created by Google for viewing (even after the end of my trial period) on a computer (Mac or PC) that is not supported by FCPX?

  TYou would have been export from FCP before the end of the trial period. The file can be used on any machine that supports.

• Firefox will not load Java on Linux - even after following all the instructions on the net I can find - what am I doing wrong?

  The problem I have is that I am running Puppy Linux on my laptop.

  Now, I have tried everything I can to get Java works under Firefox, chrome, or Seamonkey (I have all three browsers on my computer).

  For firefox and seamonkey, I tried the following-

  Downloaded the tar.gz for java file
  he unzipped in/opt/java
  went to/user/lib/mozilla/plugins and run the command
  ln-s/opt/java/plugin/i386/ns7/libjavaplugin_oji.so
  to create the symbolic link to the plugin
  check that the plugin is executable (in fact even tried to give all full read/write permission and run it)

  For chrome does the same thing but put the symbolic link in the/usr/lib/chromium-linux/plugins folder instead.

  Restart the web browser, even tried to restart the X server where the browser runs somewhere in the background.

  All three browsers can pick up all other .so plugins in this folder except Java.

  When I click on check plugins on firefox I access the page on 'Missing Java? -For your safety, Firefox has disabled your outdated version of Java. Please install the latest version.

  However, the version I downloaded is Version 7 9 update that is exactly the same as that which is available under the latest version of Java is (it was only downloaded from this link a few minutes before, I even tried to re - download just in case there was an update in 5 minutes).

  If I go to the Java folder and run the control panel of the Java Control Panel appears, and he knows where Java is installed and everything.

  So what's happening? I have installed the plugin in the right directory? I guess then that is where all the other plugins are stored and Firefox, Chrome and Seamonkey are picking all others upward fine, or would there be an old version of Java lurking around somewhere on my system, Firefox, Seamonkey, and Chrome are trying all to use it?

  I also tried to download the RPM and posing in the folder/usr/java and replacing the symlink/opt/java than in the folder/usr/java and still nothing.

  I don't really understand it ' cos it's picking up all the other plugins like Gecko and even installed Flash in the same way and that works very well.

  libjavaplugin_oji.so is the classic Java plugin.
  
  You need the libnpjp2.so of next generation plugin (for examplejava/lib/i386/libnpjp2.so) for current browsers.

  • http://Java.com/en/download/FAQ/firefox_newplugin.XML

• After having removed the Vonage modem, computer can't find Linksys router

  Initially, I had my computer access the internet through a Linksys - Vonage - cable modem router.

  Recently, I dropped my Vonage service and get the modem.

  Now--even after the reset of the router and the modem - when I have a modem-router-computer-cable setup, I can't access the internet.

  However, if I connect the computer directly to the cable modem - I can access the internet.

  To solve the problem, I even bought a new modem. However, when I ran the linksys, software to install, it is unable to detect the router.

  Contacting Linksys on it - they have worked with me trying to get the old or the new router to work with Vista and the modem cable - and they claim that it is a problem of Vista, because I get the same error trying to put in place or the other router.

  Any ideas how to solve this problem?

  Hello

  Maybe this can help, http://www.ezlan.net/broadband.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to display the login page after having connected the laptop WiFi

  Hello

  I checked into a hotel that offers Wifi access.

  The first day, I connected to the Wifi where I select the appropriate name of Wifi since connection manager and also enter the security key that was provided to me. The navigation was very good.

  But on the times later, once that I selected the name of Wifi is no longer is asking for the password. The report shows 'connected' (to correct Wifi Hotspot) but also says -online access Internet No.. (although the connection strength is 'Excellent').

  I have taken note of what happens sometimes when I connect to my Office Wifi as well. Sometimes, need not the password, he said still "connected" but also "no Internet access", and I'm not able to navigate.

  With the diagnosis has not helped.

  Y at - it a solution to the problem for example force Windows to display the password prompt.

  Thank you

  Sanjay

  Hello, Mr. Ray,.

  Thanks for posting your query in Microsoft Community.

  I understand that, even after be connected to the network once chosen, no internet is available. Generally, you are asked the password for the first time and the next time when you try to connect to the same WiFi network, it connects automatically without the password. However, there are several other reasons for not being able to access the internet thought that the device is connected to the same network successfully.

  I suggest to refer to the article below and check if the problem still persists.

  Wireless and wired network problems

  If the problem persists and you try to use the Wi - Fi connection in the hotel and office, this network would be connected to a domain or has administrator privileges. This is why I would recommend posting your query in the TechNet forums as your question would be better suited for IT Pro audience.

  Please post your question in the TechNet Forums.