Black line copy/scan number Officejet 7500 has

Similar Questions

• OfficeJet 7500 has E910: error scanner E910 Win7 Officejet 7500 has "not detected any computer" & Doc printer/Scanner has no help

  I just moved my printer/copier/scanner/fax, E910 Officejet 7500 has on one side of my office to another.  In the process the power and USB cables have been disconnected.  Same USB cable as before, connected to the same port on the computer.<3 meters="">

  Re-installed software CD.   Downloaded updates.  Several files in the HP folder are displayed with today's date, so clearly that something happened with the update.

  Printer is now recognized and will display the files on the computer.

  Photocopier creates copies.

  ... Scanner not scan.

  When a document is placed in the tray sheet or on the glass, "no computer detected" error message is displayed on the HP device.  [Note: this computer can send commands successfully, if clear communication goes]

  On the computer, when the devices are searched and displayed, the HP device appears with any other printers/Fax.  Scanner is not mentioned here - but when the details are drilled for, said that it's in the category 'printers, scanners '.

  Googling suggested tool print and scan doctor, so I went to that and downloaded.  When you click on it to run it, it says that (paraphrase) some files are missing, wants to download them (value 121 mB). So, I click Yes or then, or whatever, and it brings them.  Notice I just do a full install and updates downloaded, that more can he want?

  Then, nothing happens.  Help HP screens suggest that he must now ask me what function I want help or ink on.  Nothing, no suggestions with little green checkmarks or advice of the error.

  So I went down there is text on what to try.  Some apply - after that the doctor Download 4 or 5 times and do the suggested software download it 4 or 5 times, somehow unnecessary.  Disconnect and reconnect the USB cord - done that, at least the print function does not disappear, but the scan did not return.  Restarted the computer and printer HP - has done that, no difference.

  This is not the first time that the scanner was not updated on the computer at the other end of the cable.  In the past and it has been a while, memory, is this activation of the analysis of the computer set the scan to life function, but I do not see this option.  The computer "HP Scan" displays an error message that the HP Officejet 7500 E910 was not found, as does the Windows Fax & Scan.

  Why, if the printer can be found, and it is in the same unit as the Scanner, the scanner will not appear?

  Telephone support HP identified the problem: no drivers.  Took about 15 minutes for a useful person straightening things.

  Note that I had uninstalled the printer and its software before re - load the software.

  As part of this process, I had identified with HP via different input strings the OS of the computer and the details of the all-in-one device model number.  So why couldn't HP identify the drivers concerned and ask them to download also?

  Anyway, for now, what I need is working.

  Detective Conan

• OfficeJet 7500 has 910: officejet 7500 a E910a

  I use Mac OSX 10.10.5 - they have more a driver that will support the officejet 7500 has 910.  Y at - it a fix for this.

  Hi @adiedrichsen,

  Welcome to the HP Forums!

  I see that you are looking for a driver for your printer HP Officejet 7500 a E910a on Mac OS X 10.10, and I'm happy to take a look for you!

  There is no full feature software and drivers available directly from HP on this printer and operating system.

  However, there is a driver by Apple which gives basic printing and scanning capabilities, you can download this driver by accessing this Web site, HP v3.1 for OS X printer drivers.

  Scanning without HP software, please see this post, Re: iMac OS X 10.9.3 Scan for iMac driver for HP OfficeJet Pro 8500 a A910a does not appear to be, by my colleague @Sunshyn2005. That applies to your printer and your operating system, as well.

  Hope that answers your question and have a nice day!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

• Borderless printing problem HP OfficeJet 7500 has

  This printer is supposed to be able to print prints borderless up to A3 +.

  However the paper list does not show option A3 or A3 + no border

  It shows A4 and legal "edge to edge"

  If I choose A3 A3 paper I get an inch border shift

  Can someone help me with this please

  HP OfficeJet 7500 has wide

  Windows 7 Ultimate 32 bit

  I have a problem with my 7500 has wide, whenever I try to print without margins A3, jams. Not the normal case A3, A4 or same A4 borderless. What is the problem? What is the hardware problem?

  Concerning

  Angus

• OfficeJet 7500 has the configuration of the fax machine with 2 telephone lines

  I have an Officejet 7500 a. The phone is a double line, phone double issue. The 2nd line/number is the number of fax. There is also a DSL service on the line and an answering machine for two lines on a phone. There is no separate cycles for two numbers.

  For installation, I shared the line out of the wall socket. We're going to the DSL modem. The other goes to a DSL filter.

  I tried to hang the black line of HP filter, then the line-1 printer. Then, out of the printer 2 - ext to a separator with several phones, including one with an answering machine. However, all the features of line 2 has been removed from all phones. I guess the line black/printer fails to pass. However I could pass the test of fax,

  So I had the idea of dividing the two lines into individual lines, feed on the second line in the printer (using the HP black line) and then again, and then recombine the lines and send them on phones. Now all the features of two line seems to work for phones, but when I run the fax test, it does not say "you do not use the type of appropriate phone cord.

  It looks like this:

  DSL filter - Splitter-L1 - L1-Splitter (recombine) - phones

  -L2 - HP Black line - 1-line 2 - ext - L2-

  I don't know why it's a failure, or what I have to do to make this work?

  For completeness, the separator is a 3 line separator, but we have nothing on the line 3. It is divided as follows:

  L1 + L2 + L3 Splitter - L1 + L3 (effectively L1)-cross

  -L2 + L3 (effectively L2)-for Officejet

  -L1 + L2 + L3 (not used)

  Ideas?

  Well, I seem to be at the end of the game. I tried sons of single line of the fax to the telephone/answering machine and fax test still does not work. I turned off also error correction mode and that made no difference.

  BUT it doesn't matter because the phones and fax all seem to work very well. I sent a fax to the service HPFAXME (several times) and it worked fine and in. The answering correctly and fax catch fax calls and ignores the voice calls. If someone meets the fax call they hear 3 beeps and the line is silent. In case, answering machine or direct pick-up on any phone, the fax is correctly. I also tried the FaxZero service and it worked fine.

  So, I will be content with that, even though the fax test fails. It bothers me because I do not let "loose ends" lying around, but since I can't read the mind of the engineers who designed it, and how they expected over this configuration, which I think would be relatively common, I'm just spinning my wheels.

• HP Officejet Pro 8620 shows a black line on scanned documents

  I have an Officejet Pro 8620. Just bought two months ago and everything was fine. I scanned just, however, an element through the feeder and it has a verticle black line subject to halfway, going down the whole page. What can I do to fix this? This is not the case again using the dish.

  The question that you see is caused by a small spec on the glass of the scanner ADF, thin glass just left of the main bed.  Clean this area as on the solution three of the document here.

  I found that shining flaslight parallel to the glass of the ADF can highlight the spec, it may be difficult to see.

• Printer large Format HP 7500 has: OfficeJet 7500 has quit the connection during the scan in VueScan &amp; Mac OSX 10.10.1

  The scanner interrupts the connection of WIFI halfway the scan. I can scan sometimes two or three pages, and then the next page will scan only partial and the connection is abandoned - typically freezes application (VueScan), while the scanner window indicates that the analysis is ongoing. If I wait until the scanner end I get only part of the page, with the background that half left in white.  That is what it is? Is the problem with VueScan, Mac OSX 10.10.1, OfficeJet 7500 or my WIFI network?

  Thank you!

  My system: Mac OSX 10.10.1

  VueScan 9 x 32 (9.4.59)

  iMac 2.8 GHz Intel Core Duo (24 "beginning 2008)

  6 GB Memmory 800 MHz, DDR2 SDRAM

  HP 7500 has large Format Printer/Scanner (model E910a)

  WIFI modem: Cisco 3825 DPC

  (Shaw CableVision/WIFI modem)

  Hello

  What happens when you scan from the HP or Capture of Image scanning software, you see similar problems?

  In the affirmative, please let me know because it wil require to solve any problem of connectivity to the printer.

  If everything works with software such as HP can happen due to any problem with VueScan, such I would say contacting VueScan at torubleshoot because they are more familiar with their product.

  Please let me know the results,

  Shlomi

• OFFICEJET 7500 HAS

  My Officejet 7500 a Format large printer prints half page of the copy. It prints and scans OK, but the problem seems to be with the copy. Does anyone have suggestions as to how to overcome this problem?

  Great news, thanks for responding with what has been done to resolve the issue.

  If you could take a moment to select "Accept as Solution", it would help others find our thread if they still have the same question.

  Thank you!

• OfficeJet 7500 has firmware

  My 7500 has worked just since I bought it. A number of errors appear get flashed upwards several times. In all over the past 2 years I only managed to print 7 pages around. Because I was busy, I simply bought a competitors printer which worked perfectly.

  Now I have time to work on it, I've checked everything I can physically on the device - nothing works.

  My best guess is that there is some faulty firmware in the machine that detects failures where none exists.

  Someone at - it on the other made a firmware update (if possible)? Or should I chuck just the machine into the bin and stick with the competition?

  Problem identified.

  On the motherboard hidden deep inside the work is a battery of small discs - this was not causing the machine to identify random failure modes.

  However, in order to get to this point, I had to disassemble the machine completely.

  While I was doing this, I noticed large pools of ink inside the printer. HP clearly knew this problem because the volume around the print head parking area has been filled with wadding of absobent. This explains why the machine seems to "drink" expensive ink.

  Very bad HP at the failure of the design in a home user machine cost (UK£ 500, $ 800 two years ago).

  Because of this sloppy design and bad workmanship, I decided enough was enough and the machine is now in the bin.

  I buy HP Desktop again? I will recommend HP to friends and neighbors? AM I impressed with the help of HP?

  I do not.

• How to set default COPY for HP Officejet 6500 has more quality DRAFT?

  How can I set default COPY quality to the PROJECT for HP Officejet 6500 has more?

  Hello

  Press on copy on the front panel of the printer, then press the settings button.

  Quality faucet and quick selection / project.

  Press on set as the new default settings, and then click Yes to confirm the changes.

  Later draft quality will be used for the copy unless any other quality is selected.

  Kind regards

  Shlomi

• Windows 8 scanning on officejet 8500 has more

  After the upgrade to Windows 7 to 8, I am unable to scan using my OfficeJet 8500 has more.  Downloaded the latest troubleshooting and printer seems to be installed, and is the default.  I am able to print, but when I go to print Center and select the option analysis, I get an error message that the printer is not installed.  Same thing happens if I try to trigger a sccan of Acrobat 9 pro.  When I I select the printer from the drop-down list at the bottom (only one), I get an error that there is a network error.  Monitoring of the parameters of the firewall enabled (by default the firewall windows at this point) does not measures on site, in case of problems.  Tried to remove and reinstall the printer, but also the re-launch of the connection Wireless to the printer, No go.

  Am able to print wireless without problem, it's just scanning it is a problem.

  Hello TainoTechy,

  You will need to uninstall the instances of the Officejet pro 8500 Control Panel

  just start typing Control Panel , which is expected to open the Control Panel window.

  Click uninstall a program , which is under "programs".
  Locate for HP Officejet Pro 8500 has "entries and Uninstall the."
  After all programs associated with HP Officejet Pro 8500 has "are uninstall, you can restart the PC."
  Download and install the software for the same thing using the link below...

  OfficeJet 8500 software to win 8

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Custom size paper will not feed. OfficeJet 7500 has a broadsheet.

  • OfficeJet 7500 a large Format
  • Prod. # C9309A
  • Windows 7 64 bit

  Try printing on paper 3 3/4 "X 6 3/4" (95 x 172 mm). 98% of my attempts, the book is not picked up or jams immediately. All attempts to set the guides and performance white paper, the same results. Appreciated recommendations.

  Hello

  The 7500 has support not all sizes on your operating system:

  Custom-size media is not supported in Windows.
  

  You can find all supported paper size in the paper specifications below:

  http://support.HP.com/us-en/document/c02283601

  You can try the No. 6 3/4 envelope size and check if this can work, it seems to be close enough to the mentioned size

  Good luck

  Shlomi

• HP Officejet 7500 has E910 hibernation

  My HP Officejet 7500 E910 has suddenly started to Hibernate. I can only wake him by pulling on the power cord. I can't find the option to turn on/off auto power.

  Sorry, it's in the PREFERENCES.

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.

• HP Officejet 7500 a: HP Officejet 7500 has no scan not after installing Windows 10

  The printer works, but when you try to parse the response is HP7500 is not found.

  On the Manage your tab scanner once you set Scan to computer you get soon a message saying that the Scan of the computer is no longer available, and before that an error message on the printer control panel

  I tried to reinstall the software and driver.  The answer is that my software is up to date. I deleted the driver, but get the same problem when the software is reinstalled

  I solved the problem completely Unistalling the driver and software and by installing the latest version of the complete software and drivers.  Thank you for your support.  John