Black screen/flashing curser on HPs3220n for Win8 installed

Similar Questions

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.

• I get an intermittent BLACK screen & lose control of system for about 45 seconds that any return to normal, this happens about twice a day

  This 'Black' screen happens at any time of the day or night on the internet. I use Firefox and Windows Explorer.
  The downtime is generally 30 to 60 seconds.

  Hello

  1. what operating system is installed on the computer?
  2 have you made any changes to the computer before the show?
  3. the problem occurs with any particular Web site?

  I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

• Black screen after turning on computer for Vista...

  Once I turn on the computer, a black screen will appear with no mouse cursor or anything. I tried several troubleshooting steps, and none of them work, including the use of Vista OS disk. I don't know what else to do. Does anyone have a solution to this problem?

  Do you get the normal splash Screen with Dell, HP, Logo etc?

  If absolutely nothing comes to power, you have a hardware problem.

  Mick Murphy - Microsoft partner

• I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

  Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

  Hello

  Take a look at this thread and follow the same steps listed in the breast.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

  In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

  This link contains a lot of other really good as well troubleshooting procedures.

  I hope this helps.

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.

• Coke spilled on Satellite Pro A100 - black screen & flashing light

  Hello

  I have a Toshiba laptop Satellite Pro A100, and this morning my daughter spilled coke top.
  It was not much and it only seems to be on the top of the screen (as the laptop was closed)

  However it was a bit on the keyboard and when I opened it it seemed to be a crackling sound from speakers?
  I turned off and unplugged the power outlet and it was built next to the radiator for the last 4 hours,
  I tried it again now and it started, there were still crackling and then the screen went black, but the 'on' will Flash blue, the capslock flashes as are the other two on the keyboard.

  Is it buggered or is there anything i can do to fix it?

  Any help would be apprciated.

  Hello

  My laptop couldn't t start because my girlfriend accidentally spilled water on the keyboard.
  The laptop turns off and I was not in a position of power upward again.
  Whenever LED books went ON and after a few seconds the laptop stop again.

  I thought that the motherboard was dead, but I tried to replace the memory modules first and bingo!
  One of the modules has been defective.

  I replaced it and the laptop turned on properly.

  Welcome them

• Pavilion dv4: black screen, flashing three HEADED by caps lock and prnt scrn.

  So, Ive had this computer for awhile, (not too long) and I noticed that many people have complained that the screen turning black and does not yet.
  Now, in my case, my screws come not cancelled, so I'm not able to check the memory problem (as indicated by the sequencing of the lighting).
  So is there another way to check what the problem? The screws are glued in place, virtually impossible to return.
  It's the first time that did something like that, and I've tried the power reset. It solves nothing.

  Hi @Awoken ,

  Welcome to the Forums of HP Support! I hope you enjoy ad with us.

  I see that your computer does not turn and you get a model three blink code. You're right, that does not indicate a problem of memory. If he could get into the operating system, then it would be memory test that you can run, but only if you can get into the operating system. You will need to open and remove the memory. This is Service and Maintenance Guide for your model 50A removal instructions page if you can pass the screws.

• See offices - black screen flashes, then closes.

  In the display of the status of office administrator is connected.
  No error in the event log on the clients connecting to the server or servers of composer vcenter/view.
  Same problem with clients XP Pro SP3, IE8 or Windows 7 SP1, IE 8.

  ESX 4.1.0 Build 348481
  vCenter 4.1.0 Build 258902
  View connection Server 4.6.0
  Administrator-display 4.6.0 Build 366101
  Discover the composer 2.6.0 Build 349155

  Re-install the Agent from the view and tools (in the correct order) and make sure that the video card on the right is used.  It should be "VMware SVGA 3D".  Additionally, make sure that you specify the amount of video memory on snapshots that you use to create your pool (s).  I think that .NET has a hand in PCoIP as well; I would check to make sure it wasn't part of the puzzle that has been "updated" by Microsoft.

• Y700, black screen of death

  Hi, I live in Macedonia and there is less than a month, I bought the laptop. Earlier when I tried to turn it on, the power led lights up, the battery is used but the hard disk light flashes about and monitor shows absolutely nothing, not even the logo. What the hell? I want my money if she already has problems!

  Hey, I managed to fix the issue - for now. I did allow the laptop sitting in black screen, which does not respond for an hour or two (did not keep track of) and then I hard reset (by pressing the power button until it turns off the phone). I turned on the computer laptop back and its functions have been restored to normal. It works normally now, I only hope that this never happens again. I kept the laptop disconnected at the same time and allowed the battery (to 38% when I turned the laptop back and was able to check how the battery was left).

• ThinkPoint infected computer won't allow any mode of windows to start: safe mode, normal mode, etc. A black screen is all I get.

  I have two computers. Those infected with Windowx XP Home Edition. All of a sudden (yesterday October 18, 2010) the ThinkPoint popup appeared. On my own computer, I looked for solutions and has been able to stop the service through the Task Manager. Then downloaded MalwareBytes. He scanned and detected 5 elements. He then opened a text window indicating that the 1 point might be deleted and needed to restart the computer. So, I followed the instructions on the window of MalwareBytes. But after reboot, a black screen. If he walks again and a black screen. F8 works but after I chooseany mode (safe mode, previous configuration, etc.) a black screen again. I looked for solutions and all assume them safe mode or any different normal windows mode, it works. My problem is that no boot option (same normal Windows) seems to work. Any help is appreciated. Thank you

  Hi Choratio,

  See thisthread for more troubleshooting steps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen with cursor when connecting Windows 7. Reinstall the drivers doesn't help not.

  I have a Windows 7 Pro machine that boots to a black screen with a cursor instead of the login prompt, but if I press some keys like enter and tab that I will get a few blue squares where probably windows are appearing.

  I can boot into safe mode and log in. I can then disable or uninstall the video card and the boot into normal windows. But if I install the Intel to the HD3000 integrated video drivers, the black screen will be there waiting for me when I reboot.

  I tried with and without external monitors connected.

  I tried to uninstall the drivers in the menu programs and features (also selection to completely remove the drivers), and I uninstalled them through Device Manager. I then reboot before installing the Intel drivers again. I tried the version on the site Web of Panasonic, as well as the latest version of the Intel Web site. Results have been the same every time.

  Are there left behind somewhere that I could try to remove registry keys? Perhaps a more thorough removal method? Something more creative? All ideas welcome!

  System Specs:

  Panasonic Toughbook CF53 (A)

  Windows 7 Pro 32 bit

  Intel CPU 2520 M w / HD 3000 integrated video

  4 GB OF RAM

  This system has been restored to a standard corporate image, unfortunately is no longer near factory that she'll get. System Restore will not be an option because he has never been in a working state. Startup Repair was not an option due to disk full corporate encryption that seems to make the unreadable disk at this time here. I tried but it fails and I can't find the drivers to be used in the environment of recovery for this BeCrypt Disk Encryption.

  Hi Brian,.

  According to the information that you, as you can start your computer in safe mode without problem, then the problem is probably with the supplied driver. Since the installation of the driver is causing the problem to occur, one possible cause is a driver you want to install is not compatible with the system. We suggest that you contact the manufacturer of your computer for help on installing the correct driver for your PC.

  Kind regards.

• black screen on TV

  Hello

  I have a problem when I try to connect my Dell Inspiron 5520 to a HDMI TV.
  My computer recognizes the TV and the screen * is * spent on my computer and the TV.

  the problem is that nothing shows a TV, just a black screen - I saw my desk for 30 seconds, but that he went.

  all solutions?

  Thank you.

  Well the problem is solved by using instead of HDMI1 HDMI2 port :)

• Get a black screen during the Installation of Windows 8

  Original title: BLACK SCREEN

  OK, I tried 5 times to install windows 8 by using the downloaded Update widows Pro

  I've updated the BIOS and other drivers and the only issue is to use the upgrade wizard is UEFI is not compatiable that shouldn't be a problem anyway
  So here's the BLACK SCREEN problem, I get all along to install past loan, after adjustment of the apparatus, after preparation, all the way to the end and then it gives just black screen until I power it turns off or reset and says windows 8 could not restore windows I get no error code or any hint of why there not everyone had an idea Yes stay with windows 7 is an excellent option, but I would try and brand and make informed decisions.
  I have internet search and it seems to be a common problem for many different reasons - ideas - Ive tried more things ive read without success. Help please

  Hello Kiwivic,

  Thank you for the question!

  I'm sorry to know that have problems you with the Installation of Windows 8. As I understand it, you get a black screen during the Installation of Windows 8.

  I need to ask you some questions to help you best.

  1. What is the brand and model of the computer?

  2 are the external devices connected to the computer?

  Method 1: disconnect any external devices (except keyboard and mouse) and then install Windows 8 and check.

  Method 2: Select the edge device devices in device/integrated graphic of BIOS (Basic Input output device) and check.

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Meet us if you encounter any problems with the black screen or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Connection via PCoIP gives a black screen, then closes

  I have a question, if I connect my view environment 4.0 via the client, authenticate and select a pool of Office I will be presented with a black screen that will sit there for a few seconds, and then close. This question is NOT replicated through the Web portal, which I believe uses RDP.

  I went through the steps on these two articles of the, but my problem persists:

  VDI with PCoIP desktop display a black screen...

  View customer login screen black...

  I'd appreciate any help you could provide!

  Thank you!

  What ESX version are you running?   There was a problem with the ESX 2 update that caused malfunctions PCOIP

  http://KB.VMware.com/kb/1022830

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12