Black screen "go" on my Satellite 1110

Similar Questions

• Black screen after login on Satellite L350-20 q (normal mode)

  My Satellite L350-20 q running Vista Basic.
  After the connection, which is normal, I'm going to the arrow then turning to a permanent black screen when I start in normal mode.
  In safe mode, I have a normal behavior and I can work. No malware present a Spybot report. But my Avast antivirus is doesn't seem to work in safe mode.
  Do you have an idea about this problem?

  A colleague advised me to update my graphics driver which is currently version 06/12/2008 Intel Corporation 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the name of the file to download the latest driver?

  Post edited by: normal mode of nigelle added to the title.

  On this virtual path, it is not easy to say what the problem is here. I don't know since when you have this strange problem but if possible, try to roll back the OS to an earlier time until she starts to happen. Use the System Restore tool to do this.

  I don't know what is the seriousness of this problem may be but and if the display driver installation can help. To be honest I don't think. My advice to you is to back up all your important data and install OS again using recovery image installation. After doing this you will have factory again and everything will be OK.

  By the way: I think that this old notebook is supported for Win7. A long time ago I ve installed Win7 32 bit on L300 and there HERE perfectly. Much better than the original Vista OS.

• Black screen on boot - Toshiba Satellite M70

  Hi all

  I have Toshiba Satellite M70, I need help, and I will describe my problem:

  -A few days my screen went black all of a sudden, I don't know how do I was away from the laptop.
  -Until yesterday, when I start my laptop, it gives me the black screen all the time but when I put to sleep by closing the laptop for a few seconds and then I click the button, my screen starts showing very well until my next restart and I do it again (I usually keep my laptop running almost 18 hours) which means that there is a lot of time on my next boot)
  -But today I started too many times, it gives me the black screen and the sleep mode no longer works. But several times today when I tried to start, the display shows the Toshiba screen for only 1 second then black alley again.

  PS You can see almost threw the black screen just if there is a Sun facing the laptop.

  Thank you in advance,
  Best regards
  Mr. Mher Krikorian

  > You can see almost threw the black screen just if there is a Sun facing the laptop
  This is very useful information
  I think that the problem is related to the FL inverter
  FL-converter is a small part that controls the backlight of the display.
  If this part starts to malfunction so you would see everything as behind a thick fog

  In my view the FL inverter must be checked and replaced if necessary
  This, to get in touch with a local service technician

  Welcome & happy new year!

• Black Screen on Login on Satellite A200 on Vista

  My new boots OK Satellite and takes me to the fine login screen. When I choose to connect, I get a normal screen as if it's going through my home page, and then after a few seconds the screen goes black, with just the showing white arrow cursor.

  To get out of this I go , move the user to another user and repeat back to me as a user. Then it works OK but it will quickly thanks to a black screen when I change new user.

  Clues as to what is happening and how to fix it?

  Have you installed and configured the Toshiba picture yourself?

  This is a very rare issue because there should be only one user configured (you).
  I think that you need to insert the recovery CD and should recover the laptop to check if the same thing happens on the new OS installed.

  Best regards

• BSOD - black screen of death to Satellite P20 552

  Hello

  I have this laptop since 2005.

  Today, after put the laptop to sleep, I picked up, and then after the system restored Windows, the screen started going black and back to normal, once again, then I noticed some artifacts on the screen, then black again, then normal, then artifacts, etc. This continued for about 2 minutes, after which I delivered to zero by pressing and holding down the power button.

  When I turned on the laptop again, I got the dreaded BSOD, black version. Symptoms:

  -Black screen (blue BSOD)
  -No logo TOSHIBA
  -No test POST
  -No visible inscription on the screen
  -No HARD drive activity (HDD seems it does not work)
  -CDROM seems to work, but cannot start with the XP CD or Bootmed Rescue CD. CD ROM glad to read the disc and then idling.

  Tried so far:

  1. with the help of the P20-552 on my Toshiba Satellite 1950 801 PSU. Works.
  2 begin the Satellite P20 552 of the battery of the device. Power supply is removed. Same results. (BSOD etc.).
  3. remove the battery and start satellite P20 552, with its own power supply. Same results. (BSOD etc.).
  4 remove the battery and start Satellite P20 552 upward with a PSU of Toshiba Satellite 1950 801. Same results. (BSOD etc.).
  5. remove all devices, the baterry and CDROM drive and hold down the power button / stop for 1 minute, then try to start. Same results. (BSOD etc.).
  6. start-up of exploitation and hold (key insert of your choice here). Same results.

  I am an advanced PC user. I own 3 different PC, 2 Toshiba laptops and a desktop PC with a Gigabyte MOBO and processor Intel QX 9650 (Extreme Yorkfield) that I assembled from scratch. My Toshiba Satellite 1950 801 worked tirelessly and flawlessly for, uh, almost ten years now.

  It seems to me that this issue is a matter of 'sudden death' MOBO. I thought to open the laptop and remove the CMOS battery, because how Satellite P20 552 lacks a "hard reset" button

  What do you think guys? Some tips before you apply the Russian system on the laptop P20-552?

  Thanks in advance.

  Leon

  Hello

  I don t think that remove the CMOS battery would be useful in this case
  You could remove one of the memory modules and could test each module in each of the slots.
  This could be useful in case one of these modules or the slots would be defective.

  You said that there is no Toshiba start screen and no message (power on self-test) perceptible property, this means that a motherboard or a part on the motherboard could be defective, but the black screen with artifacts may be the result of a GPU malfunction.

  What do you think?

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• Black screen randomly on the Satellite A200-10 x

  Hi, recently my laptop started giving me a black screen for like once a day. Now, the past 2 days its been quite... 4 times this morning! The symptoms are: black screen + DVD drive LED lights up and stays like that. So, I stop it manually.
  Sometimes he does once again as soon as I load Vista.

  There is no specific request which is the cause as it happened all through my emails. I have updated the BIOS VGA drivers and too.

  I don't think that it's an overheating problem because he never gave me problems before, and compared to other laptops, it becomes not that hot.

  It is still under warranty, but it is so random, I just hope that the technician will say just that its nothing. Any ideas?

  Thank you

  Eric

  Hello

  Have you tried an external monitor to your laptop computer? If the external monitor works properly I think that there is something wrong with your internal LCD. Maybe it's s inverter a FL issue because this part control the backlight of the LCD screen.

  In the worst case, there is something wrong with the motherboard or graphics card but an ASP is able to help you. The laptop technicians can check your laptop and share the material if it of necessary.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• Black screen turn on my Satellite C series

  Hi all

  my laptop is around the age of 10 months. Recently, the screen seems off. Actually, what happens is that it becomes so weak, I don't see anything.

  I connected to an external monitor and it displays the screen, so I guess there is no problem with the graphics card.

  Is there something wrong with the inverter or backlight? The odd time that I tilt the screen of the laptop upwards or downwards, the screen will return or the odd time the screen will work again (out of the blue), but eventually fades to black again.

  Any help or pointers is appreciated, thanks.

  Yes, I think that there is a problem with FL inverter or the display.
  But it depends on laptop model that you have purchased.
  Either you have a laptop with screen backlight or without backlight. In this case, the backlight is controlled by inverter of FL.

  From my point of few in both cases, replace the defective part in order to solve this problem.

  The laptop is 10 months old and so the warranty should still be valid.
  Don t try to solve this problem from your own hand, but get in touch of service provider authorized in your country for repair under warranty conditions.

• Black screen when starting my Satellite C

  When I turn on my laptop it shows the usual Toshiba screen with the option of choosing F2 or F12, (none of them helped) the next screen is all black with the cursor blinking in the upper left corner. Nothing else happens after that. I let (hoping it'll work) but just becomes market and repeats the process.

  Any help will be really appreciated helpline Toshiba are now very usefully closed until Monday when I'm at work!

  Thank you

  I got a cursor blinking in the upper left also, and in my case, the HARD drive was dead.
  After replacing HARD drive, I was able to install the new OS and can start the operating system properly.

  Must check if the HARD drive is ok.
  Download a tool called Drive Fitness Test and run tests...

• Screen flashes on my Satellite 1110

  I installed windows xp pro on the satellitle 1110 I have, and no matter what I try and make loads of blinking of the screen.
  I installed the drivers for the graphics on the cd and it did not work.

  Can someone advise?

  It is a night Mare, screen goes white, then again the normal color and then it will be stable it's self out for a little while and then all over again.

  See you soon

  Hello

  If possible test it please with external monitor. Please let us know if the problem persists.

• Black screen on startup on Satellite A300D

  Hi all

  first of all to say that I searched through this forum and found several ppl with similar problems and the solution was to bring their laptops to the service.
  However precisely to the problem; It happened just after a freeze any.

  I tried to boot up the laptop and all the lights were on, drive hard work for 5-10 sec, dvd - rom answer and also when I plugged/unplugged, the witness replied that the only thing is that I get nothing on my screen and nothing is loading.

  I guess the hard drive stops working.
  I tried to remove the battery and power cord and I left like that for 30 min / 1 hour, even overnight..., replaced the ram and still nothing.
  Of course I'll do it to an authorized service, but it is not one in my city so I'll be happy if someone found the solution to this problem

  10 x to everyone in advance.

  OK, sorry I forgot. The model is Satellite A300D

  Hello!

  When you have removed the battery cable and the power for 1 hour or more and then is the same, it s a hardware problem.
  I think that it of really the best to go to an ASP. They can check your laptop and share the material, because I think it's a problem with the motherboard.

  You can also send the laptop to an ASP if isn t one in your city.

  But here, you can search for s ASP if you didn t do this:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Bye!

• Black screen, but still works Satellite P200-01:00 - backlight is dead?

  Hello everyone.
  IM on the computer of my aunt and uncle and he has a problem: the screen is dark, but not dead. I mean, I still see things, but very slightly.
  But, on an external display, everything is ok.
  I searched on several forums and it seems that is what I thought: retro light appears to be dead.
  Do you know if it could be something other than the backlight dying?

  And do you know if it is easy to repair myself, if its possible to buy the piece, or I have to go to a store?
  The computer is a toshiba P200-01:00, 5 years ago so not under warranty more.

  Thank you very much

  Gilles

  I'm pretty sure FL inverter is faulty.
  > Do you know if it is easy to repair myself...
  It is not easy to do without maintenance manuals and experience in laptop disassembly. You know very well that one false move can damage the brackets made of plastic and you will have the problem.

  In my opinion try to contact Toshiba service initially. Ask how much you should pay for repairs.

• Screen goes black on Satellite 1110-Z20

  Hello!

  On a Satellite 1110-Z20, the screen could suddenly become dark. Fumble to the display-white-button (the one key when you close it) will bring to life again. All the energy registers settings are set to 'off', always, the display is obscured sometimes.

  As the screen is good when it works (as bright enough and so on) I don't think it is the inverter, but I'm no expert on this ;-) I always thougt the inverter works or does not work, but not that it stops suddenly.

  So, what do you think?

  Greetings
  Steffen

  Hi Steffen

  On my old laptop Tecra, I had similar problem. From time to time the screen started to Flash. A day after that the sleep mode, the screen was completely dark. I've been able to is that there is a window open, but there was no background light.

  In my case, the screen has been replaced. Now I have new display and I am very happy. Now, there are a lot more shine and I can work better than before.
  Honest I'm not a technician, but I assume that, very soon, you can expect any malfunction of the display.

• Black screen on startup of the Satellite NB10-A-10V

  Hello

  I just bought a new computer toshiba laptop satellite NB10-A-10V but I hate windows 8.1 and I tried to install ubuntu 14.04.

  Now when I start my laptop replaced black screen toshiba logo and any key worked (F12, delete, escape)
  So, how can I manage this problem? Why, toshiba does not or blocked an OS other than windows 8.1?
  I called support and they told me that it is 70 euros for it. It's almost a flight!

  So I think it's a good laptop and I just want to use it with ubuntu, I don't see where is the problem.

  Otherwise I'll fix it in a store of this kind of question, and I will never buy another toshiba in my future.

  So, if you can find a solution (for free, 300 euros already for the laptop 4 days ago only.) it will be very cool

  Thank you

  Hello

  Usually after the purchase of a new product, new owner should read paper textbooks s user initially. It is described that original preinstalled recovery image (original version of Windows) is saved on the HARD drive, and each new owner, before you start to do some experiments or install anything else should create recovery media. It can be DVD or USB, depending on the model of the machine.
  You created the recovery media?

  Very important, is that Toshiba does not support Linux, but in general, you can do with your machine all you want. No you don't have to use the version preinstalled Windows. Many people use Win7 or Linux on various models of Toshiba. Due to this Toshiba has created the separate category of Linux on this forum where you can exchange information and experience with other users of the forum.

  I must also say that you are mistaken if you think that Toshiba is blocking something. That s certainly wrong. When you stop preinstalled Win8 completely, you will be able to enter the BIOS settings and change the MODE to BOOT. After doing this, you can install anything you want.

  More info on what you can read on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

  For more questions on Linux on Toshiba laptops I recommend you to visit category Linux SOFTWARE and OPERATING SYSTEM.

  Good luck

• Satellite Pro L300 - cursor black screen flashing

  Hi all

  I have a Toshiba laptop Satellite Pro L300 Vista.

  The customer earned him in because when it starts it goes to home Toshiba screen then goes to a black screen with cursor flashing at the top left. I connected external monitor with the same result. Swapped RAM as well.

  Have run Memtest (spent), Seagate HDD long test (past), Ultimate boot CD and Winternals without success.
  * F8 does not work * and no more than the resumption of the plant.

  Can enter the BIOS F2 and F12 no problems and the HARD drive is listed.

  I reinstalled Vista on CD and on reboot it goes back to blinking cursor. I tried booting from the Vista CD repair and system restore. FixBoot commands and FixMbr prompt as well as with the same result.
  I feel that it may be a corrupt CMOS sensor? It's like the OS installs correctly, but the computer loses his memory on reboot where the operating system?

  Is the battery CMOS easily accessible and removable on this model?

  Has anyone experienced these symptoms? Is - fixable at lower cost?

  Hello

  If you have clients, I guess you're a technician and hope you have a few pieces of equipment in your store.
  Have you tried to set the BIOS to default settings and check again?
  If possible try to exchange the HARD drive and test the functionality again.
  You can use laptop with Linux live CD (HARD drive not required)?

  To be honest that I think n problem t is ORGANIC and, in my opinion, the exchange of the CMOS battery is not necessary.

  Please test it with the new HARD drive and post comments.