Black Screen on Login on Satellite A200 on Vista

Similar Questions

• Black screen after login on Satellite L350-20 q (normal mode)

  My Satellite L350-20 q running Vista Basic.
  After the connection, which is normal, I'm going to the arrow then turning to a permanent black screen when I start in normal mode.
  In safe mode, I have a normal behavior and I can work. No malware present a Spybot report. But my Avast antivirus is doesn't seem to work in safe mode.
  Do you have an idea about this problem?

  A colleague advised me to update my graphics driver which is currently version 06/12/2008 Intel Corporation 7.15.10.I502 for Mobile Intel 4 series express chipset family. What is the URL and the name of the file to download the latest driver?

  Post edited by: normal mode of nigelle added to the title.

  On this virtual path, it is not easy to say what the problem is here. I don't know since when you have this strange problem but if possible, try to roll back the OS to an earlier time until she starts to happen. Use the System Restore tool to do this.

  I don't know what is the seriousness of this problem may be but and if the display driver installation can help. To be honest I don't think. My advice to you is to back up all your important data and install OS again using recovery image installation. After doing this you will have factory again and everything will be OK.

  By the way: I think that this old notebook is supported for Win7. A long time ago I ve installed Win7 32 bit on L300 and there HERE perfectly. Much better than the original Vista OS.

• Black screen randomly on the Satellite A200-10 x

  Hi, recently my laptop started giving me a black screen for like once a day. Now, the past 2 days its been quite... 4 times this morning! The symptoms are: black screen + DVD drive LED lights up and stays like that. So, I stop it manually.
  Sometimes he does once again as soon as I load Vista.

  There is no specific request which is the cause as it happened all through my emails. I have updated the BIOS VGA drivers and too.

  I don't think that it's an overheating problem because he never gave me problems before, and compared to other laptops, it becomes not that hot.

  It is still under warranty, but it is so random, I just hope that the technician will say just that its nothing. Any ideas?

  Thank you

  Eric

  Hello

  Have you tried an external monitor to your laptop computer? If the external monitor works properly I think that there is something wrong with your internal LCD. Maybe it's s inverter a FL issue because this part control the backlight of the LCD screen.

  In the worst case, there is something wrong with the motherboard or graphics card but an ASP is able to help you. The laptop technicians can check your laptop and share the material if it of necessary.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Welcome them

• 1IZ satellite A200 with Vista crashes every day without no reason

  Hello guys,.

  I have a Satellite A200 with Vista Home Premium installed. In the past months, the BONE is suspended every day, I was not able to detect the reason. nothing is having replied to the questionnaire, not even Ctrl-Alt-Delete, the only solution is to stop from the power switch.
  I do not found something wrong in the system log, so I do not know what to do. Toshiba PC diagnostic shows everithing OK.

  What can I do? Perhaps a cooling problem? A guide for cleaning?

  Thank you.

  Hello

  So to be honest, it's hard to say what are the really causes your system to hang. Possible reasons:

  HIV 1-infected
  2 problem of file system Os including drivers, programms...
  3 had to be clean
  hardware problem 4

  I recommend:

  1 search for viruses
  2 reinstall the drivers (especially as a vga and chipset drivers). Check installed programs
  3 use compressed air jet to blow off the dust from the cooling module.

  If this does not help, do a fresh install of the operating system. Then we will see what to do

  Welcome them

• Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

  Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

  I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

  Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

  I just want to be able to talk to my grandchildren...

  Thanks in advance,
  Sue

  Hello

  He is a Canadian for Toshiba laptop model.
  Please see the Toshiba Canada Web site to get the right webcam software:

  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

  Welcome them

• Re: Screen dead on my Satellite A200-27U goed

  Intermittent (and frustrating!) problem with my new laptop Satellite A200-27U. Every now and then the screen turns white and the only way to return to work is power off (and the battery) before turning on again.
  This problem may occur twice in the space of an hour, or not at all for a day!

  Any ideas?

  Hello

  I assumed that the screen remains empty after that laptop computer went into sleep mode or displays have disappeared because of the power settings.
  Well, I read about it in the various threads and everybody says that the BIOS update should help resolve this annoying problem.

  So I would recommend visiting the European driver of Toshiba page, to download the good BIOS and then to perform the BIOS update.

  Good luck

• Black screen on boot - Toshiba Satellite M70

  Hi all

  I have Toshiba Satellite M70, I need help, and I will describe my problem:

  -A few days my screen went black all of a sudden, I don't know how do I was away from the laptop.
  -Until yesterday, when I start my laptop, it gives me the black screen all the time but when I put to sleep by closing the laptop for a few seconds and then I click the button, my screen starts showing very well until my next restart and I do it again (I usually keep my laptop running almost 18 hours) which means that there is a lot of time on my next boot)
  -But today I started too many times, it gives me the black screen and the sleep mode no longer works. But several times today when I tried to start, the display shows the Toshiba screen for only 1 second then black alley again.

  PS You can see almost threw the black screen just if there is a Sun facing the laptop.

  Thank you in advance,
  Best regards
  Mr. Mher Krikorian

  > You can see almost threw the black screen just if there is a Sun facing the laptop
  This is very useful information
  I think that the problem is related to the FL inverter
  FL-converter is a small part that controls the backlight of the display.
  If this part starts to malfunction so you would see everything as behind a thick fog

  In my view the FL inverter must be checked and replaced if necessary
  This, to get in touch with a local service technician

  Welcome & happy new year!

• New Hp pavilion touchsmart shows a black screen after login

  I just bought a new Hp pavilion computer printer portable all-in-one laptop / tablet that runs windows 8. It worked perfectly well until now.

  The laptop starts fine, the hp displayed logo and the login screen is displayed. After that I entered the password, it begins to load but then becomes just a black screen. My cursor is visible, but nothing else happens.

  I restarted the laptop several times. Help, please. Thank you.

  Hi all

  Please use F11, press it all right after the startup of the device. Press several times to ensure that you access the Recovery Manager.

  Then, when you're there, select the language in the first screen and then "troubleshooting." Then select advanced options. In this menu, select System Restore, to restore your system to a date before the show began.

  In case you have no restore points, in the section "Troubleshooting" menu, select "System Refresh", it reinstalls the system without erasing your data.

  In which case you can start in safe mode, try to search for a program called "SearchProtect" and if you find it, try to uninstall it.

  Let me know the results of the above suggestions.

  Thank you

• BSOD - black screen of death to Satellite P20 552

  Hello

  I have this laptop since 2005.

  Today, after put the laptop to sleep, I picked up, and then after the system restored Windows, the screen started going black and back to normal, once again, then I noticed some artifacts on the screen, then black again, then normal, then artifacts, etc. This continued for about 2 minutes, after which I delivered to zero by pressing and holding down the power button.

  When I turned on the laptop again, I got the dreaded BSOD, black version. Symptoms:

  -Black screen (blue BSOD)
  -No logo TOSHIBA
  -No test POST
  -No visible inscription on the screen
  -No HARD drive activity (HDD seems it does not work)
  -CDROM seems to work, but cannot start with the XP CD or Bootmed Rescue CD. CD ROM glad to read the disc and then idling.

  Tried so far:

  1. with the help of the P20-552 on my Toshiba Satellite 1950 801 PSU. Works.
  2 begin the Satellite P20 552 of the battery of the device. Power supply is removed. Same results. (BSOD etc.).
  3. remove the battery and start satellite P20 552, with its own power supply. Same results. (BSOD etc.).
  4 remove the battery and start Satellite P20 552 upward with a PSU of Toshiba Satellite 1950 801. Same results. (BSOD etc.).
  5. remove all devices, the baterry and CDROM drive and hold down the power button / stop for 1 minute, then try to start. Same results. (BSOD etc.).
  6. start-up of exploitation and hold (key insert of your choice here). Same results.

  I am an advanced PC user. I own 3 different PC, 2 Toshiba laptops and a desktop PC with a Gigabyte MOBO and processor Intel QX 9650 (Extreme Yorkfield) that I assembled from scratch. My Toshiba Satellite 1950 801 worked tirelessly and flawlessly for, uh, almost ten years now.

  It seems to me that this issue is a matter of 'sudden death' MOBO. I thought to open the laptop and remove the CMOS battery, because how Satellite P20 552 lacks a "hard reset" button

  What do you think guys? Some tips before you apply the Russian system on the laptop P20-552?

  Thanks in advance.

  Leon

  Hello

  I don t think that remove the CMOS battery would be useful in this case
  You could remove one of the memory modules and could test each module in each of the slots.
  This could be useful in case one of these modules or the slots would be defective.

  You said that there is no Toshiba start screen and no message (power on self-test) perceptible property, this means that a motherboard or a part on the motherboard could be defective, but the black screen with artifacts may be the result of a GPU malfunction.

  What do you think?

• HP 2000-2c22DX Notebook PC: HP 2000 - black screen after login

  Hi, I have a hp 2000 laptop that has a black screen after I login. I have used F9 or ESC tab and follow the directions shown by others with the same problem, but nothing has changed. Sometimes he goes to the site of Regclean Pro I installed when I got the Pc, but suffice it to say you have error and difficulty buying Regclean. I once the buy, but nothing has changed. Please help, I have a lot of photos that I don't want to lose. Thank you

  Try to install the free version of MalwareBytes. After the installation to run a full analysis:

  https://www.Malwarebytes.org/products/

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• Persistent black screen after startup on Satellite Pro A210 (PSAFHE)

  Need help, need advice on how to solve a persistant problem with black screen after put into initial service.

  Initially its fine but after the initial Toshiba of the screen just goes black, and the rest in this way, the PC stays on. Have you tried F8 options but all result in the same.

  Help please.

  Hello

  You can access the BIOS by pressing F2?
  Boot from a boot as Recovery DVD disk?

  If both is not possible, I'm afraid you have a serious hardware problem m.
  In this case, I get just speculate on the affected parts. Maybe his problem GPU or motherboard who knows

• How to change the brightness of the screen on Satellite A200 on Vista

  I have a problem with the brightness on my Satellite A200 - 14 d in vista, the default settings have very high brightness and when I change the brightness after a reboot there are default settings... (VGA is GeForce 7300 go)

  As far as I know there is nothing strange. The same thing was happening to me. If you want to have the brightness of the display on the lever of the lover all the time, it must be changed in power options. Please select your preferred profile (symmetric for example) and set the LCD brightness to the lower level.

  It works for me.

• HP Pavillion 11 x 360: black screen after login

  I recently got my x 360, used for about a month, go to turn it on, boots fine then I connect, and it goes to a black screen with the cursor, can not do anything except ctrl alt delete, then Task Manager, nothing works, it's just a white, black screen
  I restarted several times without success and becomes very annoying.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When system restore interface has loaded, select a restore point at least 48 hours before this connection problem occurred first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Windows Vista Ultimate 64-bit goes to a black screen after login. Completely insensitive.

  I seem to have a problem similar but different enough to justify a new thread. I am running Windows Vista Ultimate 64-bit, and after the connection, I get a black screen with a cursor that can move normally. However, it becomes more complicated as everyone else. Absolutely NO work of access keys at this point, ctrl-shift-esc, ctrl-alt-delete, windows-r, don't SHIFT five times, NOTHING that other threads have suggested. I can't do anything but restart the computer once it reaches that point.

  This is where it gets weird. Regular Safe Mode actually works for me, but is not the Mode safe mode with networking. There has been absolutely no sign of difficulty with this computer before that. I already have Malwarebyte Anti-Malware, it has been updated yesterday. I checked for ntndis in the registry, nothing. I uninstalled my video drivers, now, I have to reinstall because it wasn't the problem. System Restore was only a restore point on March 1, which did nothing even though the computer was working fine, March 1. I do not have the Windows disc, I split the cost with a friend who's in Arizona that I know, and he has probably lost the drive now.

  Please help, my office is useless like this. I'm on a laptop, and I have a 512 MB USB key, if something needs to be downloaded on the desktop.

  Hello

  1. go to your router manufacturers website and make sure you have the latest firmware for it

  2. go into your Web site computer and makle manufacturers you have the latest network adapter drivers

  3. read this

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems