Black screen on Satellite L300D

Similar Questions

• Black screen on Satellite M40-185

  After that a few months of problems with switch-offs sudden finally my Toshiba Satellite M40 - 185 is a black screen and it cannot do more. I have an external monitor, but it is also black.
  Should I try to get a new LCD inverter or leave the Toshiba service get it and look at the motherboard?
  Maybe its completely dead?

  Any help and suggestions welcome!
  Dimitris

  Hi Dimitris

  If the result is the same laptop computer s screen and external monitor it's probably serious hardware problem and fair service can help. I guess that the graphics card is the troublemaker and I fear that the motherboard must be exchanged.

  Of course, I can't say that for sure. Because of this that the technicians run diagnostic programs to see what is the problem with your laptop.

• Disk error and black screen on Satellite c660-21z

  Hello

  MY SON HAS HAD HIS LAPTOP FOR 3 WEEKS.
  USED THIS MORNING, SHUT IT DOWN IN A NORMAL MANNER, WENT TO START TONIGHT AND GETS A BLACK SCREEN WITH "A DISK READ ERROR OCCURRED. PRESS CTRL + ALT + DELETE TO RESTART»

  I TRIED TO RESTART, TRIED BOOTING IN SAFE MODE, AND THEN RETURNED.

  SOMEONE HAS SUGGESTED EVEN TAKE OUT THE BATTERY AND PUT IT BACK BUT NOTHING SEEMS TO WORK.

  CAN ANY ONE HELP?

  Thank you

  Hello

  It looks like a problem with the HARD drive.
  Please check if the HARD drive is recognized in the BIOS. Switch on and press F2.
  Usually, this will help you access the BIOS.
  In the BIOS on the front page that the HARD drive should be mentioned is that?
  Otherwise, this means that the HARD drive is dead and must be replaced

  By the way: you did not post the laptop model but if it s 3 weeks old, then you must get in touch with Toshiba service, if the HARD disk is defective you should get a new one for free because the warranty to be valid.

• Black screen on Satellite L40-156 turning on

  My son turns his laptop properly last night.
  To turn it on today and all that there is a black screen. You can hear it turning, the appropriate lights are on the laptop but the screen remains black.
  No cursor or prompts.

  Any suggestions as to whats wrong?
  It is interesting to try the recovery disk?

  This strange s
  But maybe I can help you.

  In my case, of workaround helped;
  -remove the battery, disconnect the adapter
  -wait for about ~ 30-60 min and bring together the two sides for the laptop
  -try to power up

  I hope that the laptop don't feed after this short intervention.

• Black screen on Satellite C50-A-19 t running win 8

  No beeps at startup blue don't clear showing and orange too. Just no black screen moves.

  Fortunately kept my old H.P. old girl like me :)
  If at least can get online to check diagnose information (please in simple terms)

  Thank you very much
  AJay

  Laptop s hardware seems to be affected.
  But maybe you should try a common solution that would breathe new life into Notepad.

  First unplug the AC adapter and remove the battery.
  Press and hold the power button keep it pressed for about 30-40sec
  Then connect the battery and the AC adapter.
  Now press the power button once more.

  What happens now?
  Could you give some feedback?

• Black screen on Satellite Pro C870-1CJ

  Good night

  I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA monitor with success.
  As I guess it was a problem with the graphics card then in the blue screen message, he made atikmgpag.sys that I tried to install the latest version of the graphics driver t but no news on the laptop screen.
  I also tried Toshiba Tempro, which has not had the success also. I have tried several things without result.

  Can anyone help me to solve the problem? I'm a bit desperate.

  Thank you

  Gabriel

  As far as I know your laptop Satellite Pro C870-1CJ was equipped with two graphics cards:

  1 - internal Intel Graphics HD 4000, which is part of the Intel CPU
  2 external ATI Radeon HD M 7610

  The error that contains information about the atikmgpag.sys file seems to be related to the ATI graphics card driver.

  I'm not sure, but it might be possible that the graphics chip from ATI external began to malfunction.

  Anyway, if possible, try to retrieve the laptop as mentioned by Liam
  If this is not possible, the material may be affected and it could be costly to repair.

• Black screen on Satellite A210

  Hi all

  The screen of my Toshiba Satellite A210 broke so I replaced it and RAM mounted, new screen worked for a few days now, it's a pure black with no sign of life.
  I took the battery and put it back in and replaced the RAM but still no visual.

  Remove the battery and RAM, connect the laptop to AC power only and press the power button / stop.
  What happens when you do this?
  Is portable ON all the time?

• Black screen on Satellite A200 - 1 M 8 while working

  Hi all,

  I have the Satellite A200 - 1 M 8.
  When works after a bit or and later the screen goes black but the pc still works.

  So, I have to press the power of about sutdown, then when iam open his excellent work.
  This problem happen 1 ounce a day, maybe 2 times and 3 times and sometimes its good work all day!

  Pleasure left in the laptop works.

  I send to the company that is authorized by toshiba and they told me that the problem is the hard drive and pleasure, it's a lie!
  I think I'll go back to me with the same problem :(

  Hello

  Maybe you should contact the other service to hear different opinions about it. I don't see that the HARD drive has something to do with it.

  I would like to know when this happen exactly: simply work or when the display is off because of the power settings?
  You can also try, what do the BIOS update. If the problem persists, I can imagine that this problem is caused by the material.

• Black screen on Satellite A300D when the lid is closed

  When I close my Satellite A300D the monitor turns off, of course. But when I open it again the screen remains black. I can hear everything is working normally (Windows Vista 32 bit).

  Can someone help me?

  Johannes

  Hello

  As far as I know the laptop to stand mode when the lid is closed!
  Please check your settings in Vista power options and turn off the lid closing option.

  In addition, I would recommend updating the BIOS and the driver of graphics if a newer version is available on the European driver Toshiba page.

  Best regards

• Black screen on Satellite A10

  I had an A10 satellite time is long enough, but now, it doesn't seem to work. The screen is all black. When I connect to the computer to a monitor, I can see the screen as usual but all right by taking just the connection on the screen remains black.

  I can see the screen a little bit, but it is not usable.
  Please help someone
  Sorry if the description of the problem-not very good

  Josef

  Hello

  It s certainly nothing wrong with the graphics card chip because you can see everything on the external monitor.

  > I can see the screen a little bit, but it is not usable.
  Because of the statement you I presume that the dysfunction of FL-inverter. It is a small part that is placed behind the screen of the laptop.

  It seems that the replacement is necessary to get rid of this display problem.
  Contact the Toshiba authorised service provider in your country and explains the situation with your laptop technician.
  I'm sure will help guys!

  Good luck

• Black screen with Satellite P200-143

  Hello
  I ve just brought a toshiba Satellite p200-143, a month ago, I went to turn it on and it starts but the screen is black.
  I guess its works ok but I don't see anything to be shaw, you mind, it's from the normal sounds, but always with a screen.
  I don't know anything please help me obe - 1 your My only hope!
  All the lights are on but nobodys home!,: S

  Have you tried to connect to an external monitor

• Black screen but Satellite T is on

  Hi my computer screen went black. Even when I turn it on and on back lights but I don't see anything on the screen, not even vaguely.

  -What this means and what I can do?

  This means that one of the parties s notebook is defective.
  You can connect an external monitor to the laptop to check if his number to the internal display if something would be seen on the 2nd monitor, then this means that the internal display is faulty and should be replaced if not, it may be a mistake of mother/graphics card or something else. But in any case you need professional service help

• Black screen on Satellite C660

  When I turn on my laptop, C660, the screen is black. It's the same thing when I try with an external display?

  This is a brand new laptop - only benn used a few times.

  Remove the battery and unplug the AC adapter.
  Now hold down the power button / stop along 30 sec
  Then reconnect the two parts and try to turn on the unit.

  If that doesn't work, get in touch with the Toshiba ASP in your country to check hardware if the laptop is new, the guarantee must cover the repair

• Black screen on Satellite C660-2JD

  I'm having a problem with a laptop, friends, windows starts normally and then after all goes just the loading screen black with the cursor (arrow) on the screen, I can move the cursor but nothing else can be done.

  If anyone has had this problem before and know a possible solution for it?
  Thanks for any help

  > Then there opportunities to go back to windows 7?
  Yes. If you created the recovery disc using this drive for recovery image installation.

• Black screen on Satellite C75-A-11J

  Hello

  My screen remains black. I can only see the mouse and it moves, but nothing goes further. Someone knows what to do?

  In the meantime you're answers

  Tonny.

  Hello

  Try this short workaround:
  Disconenct the AC adapter and remove the battery.
  Now, press and hold button power 30 sec long.
  Then connect the battery and the AC adapter and turn on the device.

  Check the result.

  Otherwise, turn off the unit once more pressing and holding the power button / 4 sec long.
  And then switch on and press F12
  Now you should see the advanced boot menu and here, at the bottom of the device, you can choose the option of HARD drive recovery.
  This option allows you to recover the computer laptop back to factory settings