Black screen on startup, error: 0xc00000034

Similar Questions

• Pavilion dv6t-7000: the black screen at startup error

  My computer was slow for a few days now and yesterday it froze completely upward if I pressed the power button until it turned off and I tried to start it again to the top. It did the windows on screen for about 15 seconds then the screen went black and all I had, it was a cursor on a black screen. Fan always on, keypad lights, turntable CD upward. I tried a hard reset with battery, I don't have an external monitor to try, I tried reinstalling the RAM, I tried updating the BIOS, I ran the memory and the hard drive test, and nothing has worked so far. Another thing that you have would be appreciated.

  I have a care package which is always good, but I'm in Chile until August. It would still be possible to make a claim and took in charge?

  Hello

  If the system restore failed, so the last option would be the system recovery. Reinstall the OS (operating system)?

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5273697/document/c01867418/

  If the system recovery defective then computer must send to the HP service center.

• Black screen on startup and error message.

  I am running Windows Vista 64-bit.  Recently there was an automatic update done and since it was made when the system boots up I get a black screen and an error message saying "C:\windows\explorer.exe" "the version of this file is not compatible with the version of Windows that you are using" check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.  The only way I can get out of the black screen is to hit ctrl + alt + delete and open Task Manager.  I can then use ie explore etc.  How can I do a system restore to restore the computer back to where he worked or where can get a fix for this problem?

  Boot from your Windows DVD in the Repairoptions [1], select command prompt and enter the following command:

  sfc/scannow damaged = c: \ /OFFWINDIR = c:\windows

  (replace C with the location of your Windows)

  André

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out [1]

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• B540 TDR and black screen on startup

  Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and after a few hours of work, when I came back, the screen was off and there wa no way to turn it on. I press the power button for a few seconds to turn off the pc and he died. When I turned on, the computer started but the screen is off (not the 'lenovo' logo was shown on the eve) but everything else seemed to work (play plug/unpluging usb external hard drive the sound of the carachteristic). I turned off again and wait ten minutes before the market again, this time above the 'lenovo' logo was shown, but it seems that the pc failed to boot win 8. I unlplugged everything, removed the power cord, wait an hour and after that all started ok but the error message "display driver stop" was still there. After this date the computer randomly starts ok or with the screen. Given that I do not use it intensively Isuspected some windows update to cause this strange behavior and I'm trying to use a point of restoration, until July 17, but the problem was still there. Then I removed all recent windows update of June on, and I realized that in one case, it was not possible (i.e. the "remove/uninstall" button not showed that KB). I googled around and found the subject KB has been reported to broken system and the only way to react was to use a DOS command to reatore a new installation of the system. I did and actually everything works ok for 2 days (one day, I actually use the PC all day to upload stuff to iternet it to work). Unfortunately, after that day, everything seems to repeat: new 'pilot not resposinding to display' and a black screen at startup.

  Please consider that the system is quite new and clean (only 3/4 months of life) and everything works fine until end of July. What do you suggest me?

  
  

• Pavillion dv6 6b15ed: Driverupdate to fix the black screen at startup windows 10!

  Hello

  Question:

  Is there a new driver is released for my AMD Radeon HD card 6755 2? (double grafics)

  Because the latest driver causes a black screen at startup. Sequence: wenn turn on u see hp and that start-up logo win 10 after that it crashes on a black screen for about 2 minutes, then start 10. (about 2, 5 minutes later)

  I have now installed a windows 8 (issues) driver and windows starts in 6 seconds (with normal hard drive).

  I can't play the games but the bootspeed is good.

  So is there a fix or is there is 1 entry?

  TNX

  While the video card is not supported with the latest drivers.

  You can update as much if you want to, but isn't is not helping.

  Even in charge AMD said that this card is not supported with drivers.

  But today, I tried 1 times more, I used the old driver AMD_Display_13.352.

  With the first reboot, it was still black and some errors of the pilot, but after that the second quick start installation restarts!

  Appearance of the logo Windows 10 only 3 or 4 seconds and start immediately, without black screen and I got sound, video and video tube work as well.

  If other people having the same problem download Drivethelife and download the old pilot 13.352 and see for yourself.

  Make sure u delete all drivers previously installed with DDU (Display Driver Uninstaller) of guru3d site.

  Almost forgot: I also disabled windowsupdate to prevend install other drivers (new).

  Greetings

• black screen at startup and even on HDMI

  My hp pavilion dv7 gives me a black screen at startup and even if it is connected to my HDTV via HDMI. have tried several methods but still not working (the battery grip and long pressing the power button and then using the AC adapter to turn on). Can someone help me solve the problem please.

  Yances,

  Welcome to the forum.

  Have a look here:

  Provides the steps necessary to test the memory and the hard drive and restore the operating system if the laptop does not start and no error message is displayed.

  HP Notebook PC - troubleshooting black screen displays with no error message during startup or boot

  The next document implies that the system provides an Error Message:

  HP Notebook PC - troubleshooting on a black screen error Messages that may occur during Startup or start-up

• All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup

  All of a sudden my Macbook Air 2013 13 inch 4 GB shows a black screen at startup, no problems before

  Try to leave is SafeMode as shown here:

  Try safe mode if your Mac does not end commissioning - Apple Support

• Satellite A305-S6898 - half black screen at startup

  I bought this laptop in early March and had to return to store due to a problem at startup when half of the screen would be black on the Windows login screen. They ordered me a new I got about 3 weeks ago and I used it for about a week before I had the same problem of a half black screen on startup.

  Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.
  I had to reboot in safe mode and run a virus scan just to make sure it wasn't my problem.

  I do not download anything on this computer other than basic messengers and photo editing programs.
  I have a HP MP7170N desktop computer which I use to download everything that seems to work faster than the laptop and I use photo, download torrents programs and store most of my pictures and music on this one and it has only 1 GB of memory compared to this the 4 GB.

  What is the problem?
  Anyone have any ideas as to what I can do.
  I can't really go back to the shop because they give only a grace period of 14 days for returns.

  > I had the same problem of a half black screen on startup.
  > Now he has been running really slow and there is a time, I've had it freeze on me and my screen turn into a bunch of colored lines.

  Doesn't look good for me it sounds a bit like graphic problem.
  Before contacting a professional Toshiba authorized service provider would be, it would be interesting to know if you have seen improvements after recovery procedure and BIOS updated.
  I think you n t get a recovery disk because you can create it using the verification of software preinstalled Toshiba manual how to create the recovery disk

  If, after installing new check usability of portable and so similar issues still persists.
  If nothing will change it s is strongly recommended to communicate with an ASP.

• Black screen on startup Satellite A80

  I get a black screen at startup what is the problem and what is the solution for it? It might have something to do with the cold?

  Hi poly

  Please put more details on the problem, because it s not easy to say what has happened without any detailed information. You hear the operation of the HARD disk or fans?
  Switch you to other devices to display, before this problem occurs?
  Unfortunately it FN + F5 key combination doesn't work if the operating system has started so it could be a malfunction of the equipment. I don t think you can solve this problem by yourself. In this case, the only way is to contact the service.

• Satellite A100 - black screen on startup

  For two days my laptop Toshiba A100-495 / model-No. PSAA9E-18F047GR / Y6065357Q with Windows XP SP3 serial shows a black screen at startup. There is still no picture Windows startup.

  The laptop is all starting, but after finishing and be ready for use, the screen is always black. When I am pressing Fn + F5 keys, the desktop appears.

  The black screen is only starting cold after stopping, not awareness of standby or pause.

  > When I am pressing Fn + F5 keys, the desktop appears

  It seems that the display output is set to external monitor
  You see the Toshiba start screen if the laptop is connected to the external monitor?
  Check it!

  In addition, I am agree with Akuma BIOS should be the default value.
  To access the BIOS F2 press while turning on the laptop. I hope that you can do this then press F9 for default settings and then exit the BIOS save settings.

• Power outage during Vista SP2 install; black screen on startup of the PC

  Hello-

  I have a PC desktop Gateway which is no longer start after a power failure has occurred during the installation of Vista SP2. The computer displays the progress at the bottom indicator, then, before that can display the login screen, the screen goes black, with a white cursor. CTRL-Alt-Del and Ctrl-Shift-Esc do nothing.

  I tried without success to the following:

  * Safe Mode/Safe Mode control guest - boots to black screen new
  * Startup Repair - told me there is nothing wrong
  * System Restore - tells me there is no available restore points
  * System restore the OEM DVD - can not find hard drive
  * Re-install this is disabled because I can't start Windows Vista-

  There are * all * options other than wiping the disc/lose all my data? The PC is in a remote area and backup drive is not an easy thing to achieve.

  The PC is no longer under warranty of the bridge, and I understand that Microsoft supports is no longer installs OEM of Vista.

  Can anyone help?

  Thank you

  -Andrew

  I can tell you how to make bootable disks, but you already have a disk.

  He has changed since good means of XP repair install from disk by booting from it.

  I would add that info to disk Bootable repair, just in case your DVD is a factory of one computer.

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  It's Vista only repair installation option these days.
  It must be switched on!
  Not much use, is it!

  Good luck with it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Above information shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista Startup Repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• S7: black screen on startup

  S7, barely a month.  Order last night, left pending, lid and power cord plugged in.

  Today he won't move beyond a black screen at startup.  Starts with the start screen "Acer Explorer beyond the limits" and then just black.  However, I can see the pointer of couse to the screen and it can move with touchpad and mouse.

  I rebooted several times, power cord unplugged, etc..  No luck.

  Looking, seems I'm not the only one with this problem.

  Come on Acer, I dropped a lot of money on this machine!  Help, please!

  Here's how I fixed my problem as described in my original post (for now, anyway):

  Unplug the power apparatus.  Open the cover; computer will power on but go to black screen.

  Power off button on the side, but leave the lid open.

  Then, with (2) lid open (1) the computer turned off and unplugged from power cord (3), press and hold the power button / stop for 30 seconds.  Computer will be quickly implemented on and then turns off quickly (you'll see the Acer logo startup screen, but he died before entering the black screen).  Keep holding the power button / stop through all this for 30 seconds.

  At the end of 30 seconds, the computer will be (should be) off the coast.   Remove your finger from the power button / stop.  Leave lid open during all this.

  With lid open, connect the power cable.  Press the power button / stop as you normally would (you are not holding it this time) to turn on.

  Computer should start normally.

  Worked for me; It may be useful if you encounter the same problem.  I said that it has something to do with static buildup.

• Black screen at startup, unable to boot from the CD

  I did something wrong on my Thinkpad T43 2668, now I have Black Boot screen cannot Access IBM, can not press a function key, cannot start from the CD.  Here's what I did:

  1 got unwanted winxp sp3 updates automatic, then restored to the permeable point via Windows XP system restore, then, cannot start system; cannot boot from the Windows XP CD

  2 2 demarrer start from Linux Live CD, format hard drive and install ubuntu, hidden Partition of domain is not deleted, always there;

  3. can start Linux OS, but black screen on startup. There is no way to see what's happening at startup; Pressing a key of function or IBM bottons returns no result, always boot in Linux;

  4. cannot boot from any CD bootable legal except Ubuntu Live CD;

  5. no means of access Bios to set the boot sequence, therefore, cannot boot from USB floppy either.

  Advice is appreciated!

  PS. I tried Linux live CD some time ago before this trouble, click on "help me to boot from CD", got something installed. I guess it's something installed out of the box and that is why now I can boot from a Linux Live CD.

  
  

• HP Pavilion G6 black screen at startup... Help!

  I have a HP pavilion G6 that has worked well for like half a year. Today I wanted to start my laptop, but it seems to be stuck on a black screen (with my slider appeared) after the HP loading screen.
  Sometimes, at the start, he says 'prepairing failback', but the results after loading at the same black screen.
  I tried to solve this problem with the following things:
  1. hard reset (turn off everything, hold the power button / stop 30 seconds, all lights and start-up etc..)
  2 replacement RAM. Someone from the Forum said it worked, but it didn't.
  3 tried to take off all USB devices such as mouse, adapter DC etc. and starts but didn't work

  I don't know if it has nothing to do with the startup problem, but a month ago I tried to do a factory reset, but my laptop seems to be stuck on the same black screen. I couldn't find a solution for this too.

  I really hope that someone can help me without sending my laptop to HP...

  Thanks in advance.

  Hello

  You are welcome

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  As your laptop is listed as coming with Windows 8, it should still be under warranty, so my best advice would be to contact HP and arrange for the replaced disk - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Vista 32: Black screen on startup - TuneUp Utilities to blame!

  I, like many others, make me a black screen with a white cursor when I start windows Vista. Using Ctrl + Alt + Delete I can open the Task Manager and access all my applications by starting a new task (for example Firefox, Cakewalk). I can minimize and reopen applications according to the needs, although there is no windows toolbar to speak of and no office.

  This happened during the first boot after executing "Registry cleanup" TuneUp Utilities 2012.

  Oh, it cleaned well.

  Two details that may be useful are:

  1. If I try to start Explorer.exe in Task Manager, it gives me this error: "the application could not initialize properly (0xc0000022). Click OK to close the application. »

  2. I do not have a system restore point :(

  I guess TuneUp went and deleted or modified some piece of my registry... is there maybe a way I can find out what he did and cancel it?

  Help!

  Hello

  When you can ditch the tune-up utilities - registry cleaners / optimizers system usually
  cause problems while fixing anything. Considered to be snake oil. If you have system problems
  Come here for assistance.

  ---------------------------------------------------------------------------------------------------

  No registration necessary data and re - install Windows Vista may be the best option if
  Here are a few more.

  You can save your files by putting the drive in another computer as a 2nd drive (the best) or a
  External drive USB enclosure and then backup to removable media such as CD, DVD,
  or other USB keys. Of course, a real computer store or your system maker can help to recover
  the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS
  -then on the Applications tab - lower right kind - new task - in EXPLORER.exe. Safe mode
  is accessible by tapping F8 as you start several times. CTRL + SHIFT + ESC will also start task
  Manager.

  First check this thread in case it is simple and if not to come back to this thread. http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.
  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the disks
  the manufacturer of your system will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  ===================================================================

  Sometimes it works:

  There are backups in the folder C:\Windows\System32\Config\Regback.

  Here is an article for XP and Vista is similar in scope. The config folder and its content should
  be rebuilt.

  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  Check this thread - you can use the command to a startup or recovery disk prompt.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/55f98088-0fc3-4371-A005-d95a457d9de6

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">