black screen with a cursor flashing at the top on the right"

Similar Questions

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• Satellite L300 - black screen and a cursor flashing at the top left

  July 11, 2010
  My computer purchased on March 7, 2009.

  I don't know if there is a problem of tension, but there is certainly a problem of heat and since I bought it, almost constantly overheating. For about 2 months, it became more slower to load the desktop. For about 1 month, the operating system found himself in a cycle of rebooting - rebooting repeatedly instead of start normally.

  On July 11, 2010, the Windows XP operating system would not start. Lit black screen, blinking cursor in the top left. The computer does not have a Windows startup disk and won't start not in: -.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (most recent settings that worked)
  Start Windows normally
  System Restore - will not give access.
  Recovery console - the Windows XP CD will start and provided access to the Recovery Console called tool. Operations: -.

  Difficulty in a Boot.ini file that is damaged - YES
  Difficulty a corrupt partition boot sector - YES
  Difficulty of a corrupt master boot record - No.

  I pressed F2, F8, F10 and F12.

  Hello

  It seems that something was tangled up in your Windows installation and the computer can no longer start t.

  In this case, you have only one option and that s reinstalling Windows. Therefore, you can take the (better) Toshiba Recovery disk or a Microsoft Windows XP disk. It will restore factory settings and your computer is read to use again.

  Check this box!

• Defective boot to a black screen with white cursor and DDDP errors.

  I have a Pavilion h8-1020, which began to show a black screen with a cursor flashing after the initial splash screen.

  I ran all the options except a complete reset utility mode.  I downloaded the Dell Diagnostics Deployment Package and booted from it.

  I ran the tests and got these errors

  4 c 00:0522 - system Interrupt controller or device has failed

  These all failed

  4600:021E - SMBIOS unidentified LM78A

  4600:021E - Fan1 SMBIOS

  4600:021E - SMBIOS chip fan 2

  I put an old HD and it starts to boot to the operating system while it recharges.  It is further than he gets with the original drive.

  Any thoughts would be appreciated.

  Thanks, BC.

  It's the Dell forum, so why you post questions on a computer HP here?

  The Dell diagnostics probably will work correctly with the HP hardware so that the results are meaningless.

  Ask your questions on the HP forum...

• Black screen with a white flashing dashboard on the top left corner

  I try to use the recovery disks (four in total). I put the first disc in and it ran on F11 and it ran, then he asked me to assess extra and who ran very well. Then he asked for 1 system recovery disc and that went very well, last she asked me to put in disc 2 of the system recovery and all I got was a black screen with a related flashing on the top left corner of the screen and it did not run. So now I'm stuck, and the disk 2 and 3 did not perform. Help! I really don't want to spend three hours on the phone with HP. I have a HPE-470F, Windows 7

  I hope we can get it worked. Normally you do not press F11 when you use recovery discs. Not sure, but you may have triggered a step wrong using it.

  Follow the instructions here closely again with an attempt to recover:

  http://support.HP.com/us-en/document/c01867418

  Also as Dokie says-good luck! Let us know how it goes.

• Black screen with blinking cursor

  So today I started my computer normally and I was doing my normal activities for about 5 minutes before my computer automatically shut down and restarted. After the flash blue HP screen, it goes to a black screen with a cursor blinking in the upper left. If I tap Ctrl + Alt + Delete it just goes back through projection and the black screen again.

  The only options on the splash screen that works are the program installation, diagnosis and menu start. For some reason, hit F11 to restore the system does nothing and it will pass just to the black screen. Another strange note is that simply type the power button it will stop, I don't need to keep it.

  To the extent the why in this case, the only reasonable explanation would be that I had a virus. Malwarebytes was telling me "svchost.exe" meant any activity suspected and I did a complete analysis of the system yesterday, he finds and supposed to be deleted the svchost.exe and I did a reboot. After reboot, it came to a black screen and proceeded to do some sort of check disk or something. After that, it was fine, but I closed it down last night and this morning, the question arose.

  I'm not really good with computers, I went into the BIOS and tried to restore the default values. As far as I know he recognizes the hard disk. Verification of diagnosis completed without finding any problems. I removed all USB devices and it always goes to the black screen.

  I am running Windows 7 64 bit. I have no recovery disks.

  If anyone has knowledge or they can share advice, it would be much appreciated.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Help, please! black screen with blinking cursor...

  my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• After a black screen with a cursor, the performed system restore, now cannot open programs, USB drive

  Original title: Windows 7 Home Edition

  Yesterday, my pc only has a black screen with a cursor. I tried to restore on another point but then after starting upwards and put my password, I get the home screen but cannot open any programs. I can't use the USB stick or cd / dvd drive so how should proceed to solve this? I can't put my external modem to make a back up and I really want to fix this without losing all the data on my pc. I can run programs in safe mode and windows installation disc opens in SafeMode as well, however I can't set safe mode.

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• black screen with no cursor or available bios

  I have a HP Pavilion dv7 laptop, which seems to agree, but has a black screen with no cursor.  The fan runs for a few seconds and flashing lights show near the top right the keyboad and cap lock button.  I pulled the hard drive and tested ok and tried to move the memory with no luck.  I also tried the trick to reset by turning off the power switch for a minute.  I searched this forum and anywhere on the internet that I could find, and all I could gather was that it is not uncommon, but no one seemed to have an answer.   The cmos battery cause this?  I always have one battery to verify, but it's a different style and I have to order a.  This computer is about two years old and with Vista.

  Never mind! Looks like you got.

• Tecra M2 - black screen with blinking cursor

  Hi guys,.

  Im hoping someone out there might be able to help me fix my laptop.
  Ive read a few posts, but not sure they can help me.

  When I swicth on my Tecra M2, I just end up with a black screen with blinking cursor top-left, or I get a screen filled with a mix of 0 and 1.
  Sometimes the home TOSHIBA screen appears with the boot options, other times it doesn't.

  I can't boot from a CD and it does not start on the HARD drive. Ive took the HARD drive on and the CDROM outside but it does the same thing that suggests to me that its does not get via the BIOS as far as the boot sequence.

  This sounds like failure of the BIOS for you and you know a way to fix it? Ive tried to take the battery, turn off and start again, but the same thing happens.

  Any advice would be appreicated.

  Thank you

  Ross

  Hello

  The cursor blinking in the upper left corner is known to me.
  I got a same problem or question may be similar.
  My laptop (from another manufacturer) didn t start but only the cursor appeared.

  In my case, the HARD drive was dead, and the operating system could not be loaded.
  In your case, the HARD drive may be dead, but usually the laptop must be able to boot from the CD/DVD drive so I m wondering why you are not able to boot from the disk
  However, the first of all what you need to check if the HARD drive is listed and recognized by the BIOS.

  Press ESC, then F1 to access the BIOS.
  You can also set the BIOS to default settings too.

  If the HARD drive is not recognized, you should replace the HARD disk.

• Satellite L550 - black screen with mobile cursor on startup

  Hello world

  I have a Win7 of Toshiba Satellite Pro l550-17u with a startup problem, black screen with a cursor, but not going beyond.

  Tried to reset the default values on initial F2 menu configuration
  Tried to boot in safe mode and the safe mode with networking
  I tried Repair computer option
  Tried the restore advanced user
  Tried to load the recovery disk
  Tried to boot the laptop directly from the disc
  Tried to remove the battery, but made no difference

  When I get the white screen with the cursor, I tried a few things mentioned.
  Ctrl + alt + delete to get the Task Manager, but nothing.
  Pushin' Win + R to open the Run dialog box, but it does not work.
  Click on SHIFT 5 times quickly to get ticky key opened to get to the Control Panel, but it did not work for me.

  Last night did not turn on my laptop turned off but when opened I received a message that my system has recovered from a serious error, you click on close and then it turned off my laptop had this problem since.

  Next step i think I can reinstall the memory but don't really want to start taking it to bits.

  I also have a large amount of data I really want out of the hard drive. any suggestions?

  Any help or suggestions much appreciated

  Hello

  To be honest, for me it looks like a Windows problem. Maybe something messed with the registry and Windows can start t more

  I think that you must restore windows recovery disk Toshiba you wrote that you have tried to load the restore disc but what happened after that? Can start the installation of recovery? If so, you should do this.

  Backup, you can do if you buy an external HARD drive enclosure. Remove the HARD drive and install in the case of HARD drive. Now you can connect to another computer.

• HP G72-227 WM won't boot to Windows 7. Goes to a black screen with a cursor.

  My laptop is a little older than a year.  Operating system is Windows 7 Home Premium. When you try to start, F11 to get to Recovery Manager does not work. It's just a black screen with a cursor.  The version of the BIOS F.17. Conducted tests of diagnostics and everything going on.  Lost my boot drive. Borrowed from a friend but it is not going to fix the problem. When you run the Startup Repair tool, it is said that if you have recently attached a device to this computer, such as a camera or portable music player, remove it and restart your computer.  There is no device connected but it keeps coming back.  System Restore has tried the borrowed boot disk and it does not restore the message gives that an unspecified error occurred during system restore. (0x8000ffff).

  Hello

  If you still have the startup disk that you have borrowed, boot from it again, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the startup disk and try to restart the laptop.

  Kind regards

  DP - K

• Satellite A100-906 - black screen with a cursor

  Hi all

  There is a problem with my Satellite A100-906:

  After having lit - Toshiba page appears - that the loading Windows XP page - more than a black screen with a cursor (the touchpad moveable)... and nothing more.

  That's what I tried without success:

  Detach the battery for over an hour
  Start the computer with battery detached
  Change the default BIOS settings
  Start in Safe Mode - the same black screen with 'safe mode' legends in the 4 corners of the screen.

  Please help with this.

  Hello

  According to your message, the screen of the laptop BIOS is visible and also the Windows screen.
  I think that it s not a hardware problem but a software problem.
  Maybe your operating system is confusing until you think about using the Toshiba Recovery disk and to restore the system?
  I mean you already tried the passage without danger and she didn't so in my opinion, the next step should be the new installation of the OS
  Check it out!

• Black screen with a cursor active

  I have problems similar to others.  After that I connect to my computer, it goes to a black screen with a cursor active.  After a few minutes my screen saver turns on, but he won't top counter just a black screen?  I tried to start it 5 or 6 times without result. I haven't added new programs (that I know) unless they have been updated automatically.

  What is the problem and the fix... Thank you

  Original title: Steve

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.