Black streak on a scanning/copy (Office Jet 8600.)

Similar Questions

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• Office Jet 8600: HP Office Jet 8600-> 8620 same ink cartridges?

  Can someone tell me if the Office Jet 8600 and 8620 new can use the same ink cartridges?

  Hello

  Yes, both use the 950 HP ink cartridges.

  However, consider the 950 ink cartridges have been updated and the 8610 support only cartridge of new generation, manufactured in October 2012 or later.

  You can find the location of the cartrideg version in the link below:

  http://support.HP.com/us-en/document/c04213877

  Shlomi

• Office Jet 8600 Premium: printing from iPhone to non - Airprint Office Jet

  I'm trying to set up a simple network. I have a router Linksys, Windows 7 computer, HP Office Jet 8600 Premium and a few iPhones.  I want to be able to print from the computer and print wireless from iPhones.

  My first thought was to connect the computer and the printer to the router using Ethernet cables and turn off the radio of the printer.  If I do this, when I connect my iPhone to the network router wireless, will they see the printer and be able to print?

  Or do I need to connect the printer to the wireless router?  If I do this, the computer will still be able to print through the router?

  Thank you.

  Hello

  You can connect the printer to your router with an ethernet cable or wireless.

  As long as the printer and iPhones are connected to the same router, you can print to the printer using AirPrint.

  Kind regards

  Shlomi

• HP Office Jet 8600 ADF jams on one side

  I have a very gently used HP Office Jet 8600

  The ADF jams on one side. I tried cleaning and the reset, but still have the same problem

  As it is printer very slightly used, I am very annoyed with this problem.

  I contacted HP. The printer is out of warranty and the problem was a feeding tube.

  They were a good deal in a good discount on a new HP printer and 3 years guarantee

  They also offered 2 sets of ink cartridges free of charge.

  I accepted that offer and thanked for their attempt to help.

• HP Office Jet 8600. Low voice, trying to fax

  HP Office Jet 8600.  Trying to send fax when a voice comes through the printer said something in a very low voice. So low canoe do you what what they saying ar. Is their any way to turn the sound all in one printer?

  Hey tiber,.

  I would like to start by saying, I paraphrase to make sure that I fully understand what the customer is asking. In this case, my first thought was something like that, "I understand you're hearing voices {joke}.

  Joke all aside, I do not think it is a volume control on the printer. There is an option to increase the Volume of his Fax, but I think it's for the ringtone. Discover

  If you tap on the arrow to the right of the printer, then tap the settings icon, you can select the fax configuration option. In the configuration of the fax machine, go to the configuration of the fax machine and choose the Volume of its Fax - strong.

  I suspect that the voice you hear is probably an operator saying something like "Please hang up and try your call again."

  I hope this helps.

• When copying, Office Jet Pro 8600 unique Cyan vertical line

  My Office Jet Pro 8600 all-in-One has a single vertical line cyan, middle of page when copying, either directly or from memory.

  There is * no. * line when I "to clean the print head on the test page", but then the line returns when I copy.

  Help, please! Thank you.

  I understand that you get a vertical line when copying.  I'm you a link to a troubleshooting assistance document.  I would pay particular attention to the glass of the scanner in the third cleaning Solution.   Let me know how it goes.

  OfficeJet Pro 8600

• HP Office Jet 8600 Fax (not fax)

  Recently, I asked my web company to change my modem in order to include a telephone line so that I can use my fax on the HP Office Jet function and I have such a misery the fax to work. When I plug the cable from the printer (line 1/2) to the modem (phone line) and I run the fax test, it tells me that there is no dial tone.  Can anyone help!

  It is because this isn't the preferred method for the transmission of faxes. You will probably need a digital filter on the line to improve your chances of send/receive. However, even with this it is not a guarantee for fax technology is designed for a telephone line analog, not who is associated with an internet service.

  This is a documentation on the best ways to set up the fax machine: http://support.hp.com/us-en/document/buu50333

  I would certainly try the digital filter on the first line. And if that does not work, or the quality, I would say either using an analog fax line or a digital fax service (both cost about the same amount).

  I hope this information is useful and have a great day!

  

• Office jet 8600 installation CD

  I have a HP Office Jet Pro 8600

  I need to re - install this device in my computer, but I lost the original CD.

  How can I find this CD of installation of files online?

  Hello there, I hope you are well!

  I saw your post you need to download and install the driver for your Officejet 8600.

  Here is the link you need: HP Officejet Pro 8600 e-all-in-one printer - N911a drivers

  I hope that helps solve your question!

  Happy Monday

• page black when I scan HP Office Jet 7310. I use an IMAC w/maverick 10:9

  Can anyone offer a recommendation to solve my problem of scanning? My HP 7310 all-in-One was analysis very well, however when it scans now, the page is all black with lines. I don't know if the problem was created when I upgraded to Apple Maverick 10:9. Help!

  Hello

  Click the Apple icon, then software update, make sure that you have available HP and Apple updates installed.

  Scan using picture Capture or Preview as shown below, the HP scanning software is not compatible with the Mavericks and can provide unexpected results:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• HP Office Jet 8600 Premium: scan using the glass rather than the feed document dumpster

  Hello, I have the above printer and I would like to analyze an old photo using the technique of the flat bed scanner rather than feed the loading of documents. Can help you with this?

  Thank you

  Casey20131

  Sure.  In your scanning software select flat instead of document feeder.

• Scanning on Office Jet 6110

  Does anyone have a solution to my problem?  I can print but cannot scan.

  Thanks for your quick response, but also a Web site. It's too bad that the scan is no longer supported. It was one of the reasons why I bought this product. I feel in a way cheated.

• Issue of scanning/Printing Office Pro 8600 N911g ADF

  The printer works perfectlyt except when scanning or printing through the ADF. When the charger is used to scan or print material shows a thin, but documents line strong, black from top to the bottom of the printed output (or scanned in).

  This line does not appear if the document is feed into the ADF and is about 1 1/4 "from the right side of the front of the scanned doc and the same distance on the back, but on the left side. If scanned into the computer and saved the doc file scan seems to have the line in the file. I thought it might be a problem of ink cartridge, but if the analysis file has a line on it of course is not a cartridge problem. The original doc of feeding through the ADF remains prestine. Interestingly, when the line appears on the printed doc or scan does not appear to align with a roller or the device of the feeder with the module duplex or ADF.

  Have completed all the steps described on the HP support site in the cleaning of the rollers, etc. on both the two the duplexer and the ADF without success. The problem occurs only when a document is fed through the ADF, so am reasonably sure that the problem is internal to this part of the unit or it could be a software driver problem.

  Am a relative novice here so any help, suggestions or advice would be really appreciated.

  Hello

  Please follow the steps mentioned in the video.

• ePrint button Office Jet 8600

  I could be quite slow here, but I can't find the button on the officejet ePrint 8600? It should be on the front left somewhere? Any help?

  Thank you

  Hello

  On the screen of the printer itself, you will see 4 icons at the top of the screen.

  By clicking on the icon on the left very open the ePrint screen.

  By clicking on the settings button in the lower part displays the settings of the ePrint.

  Shlomi

• Office jet 8600 911: 8600 open to remove the paper jam

  I tried to print the paper on the soft palate and the machine just ate.   I can't open the thing to access transportation

  Welcome to the HP Forums, I hope that you are @Harold_1,

  I came across your post about how your Officejet 8600 does not open after trying to print and wanted to tender hand. Personally I think that there could be a jam truck causing the problem. Try the steps in the below document., if you still can not access the transport, contact HP to see on a replacement unit.

  'Transport Jam' message

  If you have trouble, let me know and I'll do my best to help.

  Send me a 'Thank you' my answer to help you, or to show appreciation, click the thumb upward below please! If I helped you a solution, click on the "accept as Solution".

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

  Welcome to the HP Forums, I hope you're well @

  If you have trouble, let me know and I'll do my best to help.

  Send me a 'thanks' for my answer to help you, or to show appreciation, click

  thumbs up to below please! If I helped you a solution, click on the

  "Accept as a Solution.

  Have a nice day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.