Scanning on Office Jet 6110

Similar Questions

• HP Office jet 6110: paper close message

  Try to align new cartridges and get the above message. Also try to connect to the new computer running Windows 7.  Cannot cross the stage of cartridges align.  Any suggestions?

  For a 6110 Officejet for aligning the questions see this document.

  The document also covers the issue of the paper too narrow when trying to align the printer. I hope this helps.

• Office Jet 6110: OJ 6110 in Win 8.1 Installation and support all features

  Just moved this old printer a computer Win 8.1. Cannot find a full star driver that will run. I can print, but the scan options are very limited; for example cannot convert a scanned as pdf document. Where can I get a driver that supports completely the printer, as I had with Windows XP.

  Hello

  I'm afraid that you can't have all of the features you had in XP, only a basic set of drivers is available for your printer for Windows 8:

  http://support.HP.com/us-en/document/c03467277

  You can try a freeware software such as NATIONAL action plans that allow scanning to PDF and check if that can provide you with additional features:

  http://naps2.sourceforge.NET/

  Hope that helps,

  Shlomi

• page black when I scan HP Office Jet 7310. I use an IMAC w/maverick 10:9

  Can anyone offer a recommendation to solve my problem of scanning? My HP 7310 all-in-One was analysis very well, however when it scans now, the page is all black with lines. I don't know if the problem was created when I upgraded to Apple Maverick 10:9. Help!

  Hello

  Click the Apple icon, then software update, make sure that you have available HP and Apple updates installed.

  Scan using picture Capture or Preview as shown below, the HP scanning software is not compatible with the Mavericks and can provide unexpected results:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• Black streak on a scanning/copy (Office Jet 8600.)

  Hello

  I'll do a quick tutorial on how to fix the black streaks on a problem to scan or copy.

  This problem could be due to the problem of calibration of scan during the March.

  Now, this can be easily solved by one step. This step is a hard reset with the printer.

  Hard Reset:

  Unplug the power cord at the back of the printer and then on the wall. After this please take out the ink cartridges. Once you disconnect the two, wait 30 seconds then plug it back in the printer first, then the wall.

  Which tends to resolve streaks on a question of copy/scanning that happens after the departure to the top.

  I suggest you clean the glass of the scanner with a cloth and glass cleaner. You can follow this document which will give you a few steps more on how to clean the scanner glass.

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.
  I really appreciate it!

  I hope this helps.

  THX

  I hope it's useful.

  THX

• How to scan using your HP Office Jet Pro 8600

  Well, I got my answer because I could not find a topic 'resolved' in this regard. So I decided to post my findings to help the next interrogator (is that a word = the one interviewing). FYI - I am not a "geek", and while I can find my way around a computer it sometimes takes a while.  Also, I have Windows 7 on this laptop if it makes a difference.

  1. go to control panel and choose:

  2. material and audio, then

  3 devices and printers, then

  4 fax - HP Office Jet Pro 8600 (network) or whatever printer choice applies to your situation, then

  5 HP Printer Wizard, then

  6 scanner activities, then

  7. analyze a document or a picture, then

  8. Save as PDF

  9 scan

  10. save in a folder you choose

  I know this may seem simplistic to most of you, but maybe someone like me is out there, trying to find this out and this could help.

  Roxi

  Hello Acupuncture,

  Thank you for posting your solution you found yourself, on the use of the scanning function on your HP OfficeJet Pro 8600. I apologize as we were not fast enough to answer one of your questions on the Forums of HP Support. I've been able to check your user page but could not find your original post on us asking how Scan, did you remove the question? Anyway I'm glad you are now to the top and scanning of your JO 8600.

  For later use, I would like to you to take a look here: how Scan: Windows 7, here we will give all the options and shortcuts on scanning with or without the HP software as well as a few cool features, like the scan from the front panel of your 8600 and adding several pages in a single file.

  Yet once I thank you for taking the time to help other members of the community, so thank you once again!

• HP Office Jet 6600 - how to feed and scan several pages?

  I have a HP Office Jet 6600, can someone give me advice on how to make the feeder work to scan several pages. Any help will be appreciated

  From Internet Explorer

  Original title: printer scanner

  Hello

  You'll get better help with this product on HP.com.

  Download the User Guide http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer-series---H711/4322968/model/4323587

  Looking for an educational video (same page)

  Ask your question in the HP community

  http://h30434.www3.HP.com/T5/printers/CT-p/inkjet

  Don

• Office Jet 6700 will not control panel scan. ideas please

  Office Jet 6700 will not control panel scan. ideas please, everything else works fine and happy with printer

  Have you tried to perform a full power cycle on the system and try the analysis immediately after that everything is turned on?

  • Unplug the router all-in-on
  • Wait 30 seconds
  • Plug the router back in power and wait until it completely initialize
  • Restart the PC
  • Unplug the printer while on
  • Wait 30 seconds
  • Plug the printer back in direct power

  So, have you tried to disable your firewall and protection scan from the front panel of the printer?  Sometimes a firewall service will see the printer as a threat and block incoming traffic.  However, based on the analysis of gets it PC around as she reaches out to the device, rather than the reverse.

• How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  How to scan with an office jet 6500 has and a Mac OS 10.9.4?

  Hi midandco and welcome to the Forums of HP!

  I see that you are looking in the scanning options.  I would like to help.

  As there is no software available for Mac OS X 10.9 HP, you are advised to use the driver of digitization of the OS from Apple.  I'm including a document I would recommend using, title v10.9 OS X Mavericks: installing and using the printer on a Mac.  There is a section called "How to scan with Apple software update driver?"  This should help to address the issue.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Wireless HP Office Jet Pro 8500 - can not scan to computer

  I use a HP Office Jet 8500 Wireless and cannot "scan to computer".  When I select "scan to computer", I get a message (on the face of the printer) that says "refer to device documentation to troubleshoot issues.   I did everything in the troubleshooting guide, even if they do not address my problem, but anything done without success.  I am running Windows 7.

  Any suggestions?  Thanks for the help!

  Robin

  Destin, FL

  Hello Robin,.

  Thank you very much for your answers and your efforts! My sincerest apologies for not knowing that Windows 7 Professional 64 bit rested not with the tool! I learned something new from you and thank you so much for this!

  We can try level 3 or 4 uninstall manually, instead of running the tool. I understand that the tool would be the easiest method. Here are the steps for you.

  There are 2 ways you can run levels:

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open "Computer", and then right click on CD drive and open

  3 open the Util folder

  4 open the CCC folder

  5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. perform a clean boot

  9. run the download to reinstall the printer ( HP Officejet Pro Full Feature software and driver )

  If the software has been downloaded and extracted the download of the driver for your system:

  1. click on start and type %temp% in the search box, open the folder

  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)

  3 open the Util folder

  4 open the CCC folder

  5 If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. perform the clean boot

  (9 download drivers and full software features HP Officejet Pro Full Feature software and driver )

  I really hope that does the trick!

  Happy Thursday

• Office Jet Pro 8500 won' t scan

  Help.  My Office Jet Pro 8500 scan is no longer.  I click on the printer icon and select scan.  It seems to be analyzed.  But there is no sign of an item scanned on my desktop which is where I selected the item scanned go.  I have a Macbook Air with OS 10.9.5

  It works!  Thank you very much.

  As you are a HP pro, maybe you can help me solve my second problem.  I have the HP Office Jet Pro 8500 connected to my Panasonic phone answering machine.  He used to work without fault.  When a call came, she was not picked up the appellant was able to leave a message. If a fax came the HP received the fax.  But recently, when a call comes in, the HP picks up, anticipating a fax, and the appellant was not able to leave a message.  Any suggestions?

• Office Jet 8500 a makes a scan of document, converts and saves the PDF file, but the PDF file does not open

  My new Office Jet 8500 (A910-G) seems to correctly perform a scan to PDF, but the PDF file does not open, gives me the error message "the selected document cannot be opened" in PDF Complete.

  I agree that it's a software because it works well with Adobe Acrobat.  It's just PDF Complete (which was free with my HP computer) does not work!

• HP Office Jet Pro 8600: Error Message: Scan in use - wait until the job is done

  Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10.  Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy.  The scanner is currently in use.  Wait until your previous task is completed, and then try to scan the image.

  -There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on.  Has anyone met and solved this problem?

  Thanks in advance for any help you can provide!

  ritao

  Hello

  Thank you for using the HP forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/identify?q=+HP+Office+Jet+Pro+8600&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Before you download, choose the right model, the operating system and complete software functionality.

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Here are some resources for you scan:

  Quick Guide for scanning needs

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quick-guide-to-your-scanning-needs/m-p/5625126

  Hope that helps!

• office jet 6600 with scanning problem happens to email - error

  Problem of printer Office jet HP 6600 with image scanning to e-mail - error review Monte is finished, it goes to Foxit PDF to e-mail, but it does not send.  I use a laptop Asus with Windows 7.  Thank you

  Hi premid1,

  I want to help you to scan to email with your Officejet 6600. Are you able to scan the computer rather than the scanning to e-mail? I would like to see if we can reach the scan of your email and send it like that. This will help determine if the problem is in the scan file itself, or the scanning to E-mail process. I can't help but wonder if the analysis file is maybe great to email. Description you looks like you have the scan in the email, but cannot send it.

  Please let me know if you can then send via e-mail after the have set from the computer, as opposed to scan directly to e-mail.

• Scanning from the Office Jet 8500 Pro-Computer not connected

  When I try to scan from my printer Office Jet 8500 Pro first to the computer, I get a message that "no computer found", even though I am able to print from the computer to the printer.  Before that, I was getting a different error message when it DOES not recognize the printer, LCD list needs to be updated.  I have tried everything I know to update this list, but who has never worked or the other.  Help!

  Hi tonylepompier,

  Thank you for the update. Glad to hear have everything fixed you. Let us know if you have any future problems.