Black wire in the case p7-1154.

Similar Questions

• HP ENVY 750-177c: I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected.

  I have a HP ENVY 750-177c and has been upgraded and 2 thin black wires were disconnected from the motherboard.  They have loops at the end of the wires that look like they might slip on the pins.  The wires connect to the upper part of the box of the computer.  Where to reconnect?

  Find this card in your system. It is the M2 half-bridge Wireless card.  The other end of the wires must always be fixed.  There are 2 heels left and right of the '2 '.  If everything is correct, it is your physical WI - FI antenna. Just re - stick inside the case.  The small clips are used for an external aerial connection.

  

  PS<> have a good day...

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• Black screen after the Bootcamp

  I just installed a Windows 10 drive to my mac pro end 2012 book. I had some problems when the bootcamp says "cannot copy files of windows (or something like that). However, finally I managed to resolve each of them, the windows of the files have been successfully copoed, and after that I chose to give my windows system 230 G and 270 G for my macbook pro.

  I clicked the button installed, waited a few seconds and the laptop computer just restarted (or close) by itself. It is automatically activated a white screen (which happens all the time when I turn it on). He stayed like that RPF about 5 minutes, and then it turned out to be just black. I mean by dark black, because I can still see a bit of light coming out of the screen. After that, nothing has changed.

  I have my USB connected since all this time and my energy plug. In my view, it is connected to the wifi too, but my mac remained black screen at least an hour and a half so far.

  Is this normal? I watched a youtube video, and he says that he will take a few minutes for the windows logo appears, which is certainly not the case. Im very worried right now: well I reboot by pressing the power button? Should I continue to wait? It's really frustrated. And please ignore the grammar errors that I may have made.

  Please leave a comment if you know what the problem is or if you know how to solve this problem, much appreciated! < 3

  Welcome to Apple Support communities

  The only thing you can do at this stage is to shut down your Mac. Then, after having turned it on again, hold down the ALT key until you see all available for your MacBook bootable disks, so you should see an option with a drive labeled as "Windows" USB icon Choose and let Windows install load, so you no longer have to follow the steps. Do not forget to keep the USB with Windows install is plugged.

  If you don't see the USB as a bootable disk, and then the Windows Installer may be damaged or your MacBook Pro does not support a USB drive installation.

• Why is my screen turning black temporarily, then the screen saver turning blue, when using hotmail?

  Sometimes when you use Hotmail - specifically, put the cursor in the e-mail box - Mac color wheel starts to turn. It is quickly followed by the entire screen goes black for a few moments. This is followed by the screen back, but the background changing default screen saver is blue that usually appears temporarily when I boot. This happens not all the time, but it happens. I visited the 'genius bar' Apple Store and they checked on my machine. They cleaned up some disk problems, and it is always the case. Their thought is that it is a Firefox problem, because they did not experience to date, and it didn't happen when I use hotmail with Google Chrome.

  Tryto clear the Cookies and Cache and check again, history > clear recent history > select time range to clear all > Details select Cookies and Cache > clear now.

  Thank you

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Black screen in the online store

  Hello

  After resetting the account, I created a new account, but after login, I get black screen in the virtual store.
  What's wrong?

  Hmm, in my case virtual store access works
  Are you using the latest firmware on your device to Journ.E touch?
  http://APS2.toshiba-tro.de/KB0/OPT0502VS0000R01.htm

• Black screen on the Satellite A350-122 using Linux Ubuntu

  Hi all

  I have a couple of months it has installed Ubuntu 9.04 (which completely replaces Windows XP) on my Toshiba A350-122 and this worked perfectly, until a recent day.

  One day, after having locked the computer, when I came back the screen was very dark and nothing was visible, except with the help of a powerful light behind. Reboot and remove the battery change nothing.

  * This is the case at the beginning of the boot, and even the Toshiba logo is not visible.
  * However, the system starts normally, and I can see in the darkness of my login prompt.
  * I can also select the BIOS Setup, but the screen is too dark.
  * I have no display on an external device.
  * It was not held after an update of the system.

  The first time it happened, I got it repaired.
  The guy has managed to make the display work and then restored Windows XP.
  They said: ' + Linux is responsible for + "... we cannot do anything more!

  I reinstalled Ubuntu, and it happened again the next day... :-(

  * My questions are :*
  # If it is software issue, don't you think it should work in installation mode?
  # Is it possible to reset the display or video card?
  # How can I find out the type of video and the reference (don't forget: my screen is black)?
  # Someone has an idea to advance?

  Thanks for your help

  Martin

  Hello

  I think it's certainly a Linux software problem because the laptop work correctly using Win XP or Vista preinstalled Toshiba I m right?

  The fact is that Linux is not supported by Toshiba:(et vous ne trouverez pas tous les pilotes compatibles sur la page de Toshiba)
  So you have to pick up on some pages of party 3 drivers needed

  On the black screen issue, I think you should check if you're used to that a graphics driver right maybe an update will help.

• Screen black after using the HDMI cable, but still slightly visible screen

  Hei

  I got a c850-10 X. Brand new. Used only for a week or two.

  When I connected it to my TV (LG 42') with a HDMI cable it worked fine. But when I do not use my TV as a screen of my laptop is a black screen. Now I can only use a second display as screen alone because my laptop screen is black all the time. It is not completely black, I can still see my desktop slightly behind some sort of black cloud. If I make the screen brighter, I see a little more.

  (It is not the "shear screen" or "Fn + F4" problem, my screen on the laptop is just black. No matter what I do)

  I read a few tips and tricks on the internet for this problem, and I tried the switch off, remove the load cable and remove the battery and press the power button for 30-60 seconds before I put in the battery and then restart my laptop. But still no luck.

  Why is this happening? Anyone know? What is a wire between the screen and the under part of the laptop?

  A driver problem? Tried to uninstall the driver from the Intel card, but then the screen went APE, so I reinstalled it again.

  Everything worked fine until I used my TV as a screen ekstra...

  I have an older Toshiba laptop where the same problem apperied, but this laptop has served for about 4-5 years so I thought that I just get a new...

  Post edited by: lars.hel

  When you want to use for laptop only and disconnect the switch to HDMI cable to LCD only by using the FN + F5 key combination and when you see the desktop on the screen to disconnect the HDMI cable.

• Satellite L30 - 10Y black at startup the screen upward after the installation of new modules of RAM

  Hello

  I use the L30 - 10Y model with the following memory specification:

  standard: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)
  expansion module sizes: 256, 512, 1 024 MB

  I use Windows Vista Home Basic Edition with a 32-bit operating system.

  When installing, I removed the standard 512 MB module and added 2 modules of 1 GB compatible. At startup, it stays on a black screen.

  However, if I removed 1 1 GB modules and put the old 512 MB module to give me 1.5 GB, it works.

  I was wondering if anyone knows why this is and if there is anything that I can try to get the maximum of 2 gb, if it is indeed possible.

  Thanks in advance.

  According to the product page Toshiba Satellite L30 - 10Y is able to manage 2 GB of RAM (2 x 1 GB)
  I think that the problem is related to memory modules not fully compatible
  I think a new, fully compatible RAM modules should resolve this problem.

  PS: You updated the BIOS? If this is not the case, check if a new update of the BIOS is available on the European driver Toshiba page.

• icon black triangle in the menu bar

  MacBookPro 15 "w, end of 2012 retina

  OS X 10.8.5 (ML)

  Equipped with Safari or numbers, with several other applications in the level, when I noticed a black equilateral triangle with rounded corners and not of brands in a position of extreme left of the menus "icon" at the right end of the menu bar.

  When I placed the mouse pointer, I got the spinning beachball, clicking on it produces no action, so I started activity monitor to take a look at the list of processes, where there is no element of red text saying "such" is not responding.

  Finally, I did a restart and checked through all the accounts on the machine without seeing the new icon.

  Any ideas as to what it was?

  Rgards,

  Barry

  You can take a screenshot and post it?

  Command + shift + 4

  Click and drag the cross on a reasonable part of the menu bar, so we get an idea of the place where, and which is adjacent to the triangle.

  Try to do not include personal information.

  The screenshot will be placed on your desktop.

  You can use Preview-> tools-> annotate to draw circles, boxes, arrows, and put the text on the next page if you feel you need our attention on something specific, or block anything sensitive that went up in the screenshot.

  Start a response to this tread, then drag and drop the screen shot file in the answer box.  Add any additional text as the case.

• Tecra M4 - black spots behind the display Tablet cover

  After an intense action of cleaning every month, I recognized a few black dots on the back side of the front glass of the tablet. I did some checking of finger on the screen to see if it's a pixel error. I can say with any doubt that he is not a pixel error.

  After a Google search I found people describing the same. It is assumed that it is the result of fan heavy work.

  Y at - it no support out there that can help me solve this problem?

  Hello

  I put t really understand the link between the black dots on the screen and the heavy work module cooling.
  For me this internet s nonsense provides a lot of information useful but also very stupid gossips, myths and stories

  Always it is that you have a few black pixels on the TFT display and it sounds like a hardware problem.
  So in this case, there is only one solution; This part is replaced or repaired I guess, it should be replaced

  For all replacements, you will need to contact the ASP in your country. Ask them to help and managing others.

  Good bye

• Satellite A105-S4114 - black screen, maybe the heating problem?

  Hey all

  I'm new to the Board and I really hope that someone can help me with my computer problems.
  I have a Toshiba Satellite A105-S4114. In the last week or so, it started to get a black screen. If I m in the middle of watching a video, the sound would just go to a repetitive tone (very annoying sound) and the screen freezes completely.

  He sometimes goes to a black screen. The screen is not black as if the CPU is off but it's dark and nothing is displayed. This occurs when the computer has been for a little. I have had it over 2 hours now, and if this problem persists, it will happen more frequently. I've updated all the software and windows xp. Some people tell me that my motherboard is dying and I can't do anything, but some people say maybe it's an overheating problem.

  The vent on the left hand does not always give off light, but the laptop gets hot enough. Is it possible that my fan is dying? In the case of this "black screen", the computer is not power down and for this reason, I ve people had told me that he is not an overheating problem.

  Any ideas?

  Help, please. I sprayed the CPU down to the dust, and it has gotten a little better. I hold hope that I don't need to buy a replacement right away. I've had this for about 3 years.

  Thank you, Danny.

  [email protected]

  Hey mate,

  I think that for the moment no one can really say what the reason, but I also think it might be an overheating problem and you should start cleaning your laptop first. The point is that if the laptop is overheated (e. g. graphics card), you might get a black screen, freezes or your laptop stops immediately. So if please try to clean and follow these instructions: http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm

  Of course it could also be a motherboard problem but the laptop cleaning is cheaper and quicker ;)

  If it doesn t work you can access a service provider authorized professional assistance.

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• Satellite A300-Y00 black screen but the fan from

  I bought a TOSHIBA satellite A300/Y00 in June 2008 – 16 months. Model number PSAGOA-02Y. After ten months he did not start suddenly. It sounds like the processor and the fan starts but the screen and the led underneath the screen was all black. I tried to connect it to an external monitor, but the screen was too black. I gave her to Toshiba for 2 weeks (!) who said it was the motherboard. They replaced for free that it was still under warranty.

  A few weeks ago the same thing happened again. I turned off it and for some reason at random, he started as usual a few hours later. I called Toshiba to say that, in my view, that computer will crash soon again. They said that they will be able to take it in for service, but if they could not find anything wrong with it that they would charge me $ x. I don't give him service. I even went to a local Toshiba support guy who said that he couldn't find anything wrong with my computer and that there nothing that could do.

  Now the same thing is happening again. This time I can't do it again. Of course their fantastic 3 months for the last motherboard warranty has expired. I tried to take out the battery and start it only to the power, but it does not help.

  I don't want to pay $500 for a new motherboard, and then drop it again. It is obvious that it is a hardware problem and I think that Toshiba should replace my computer free of charge.

  Anyone with similar problems? Any advice? Get pretty annoyed...

  Hello!

  Have you ever contacted again authorized service provider? If this is not the case, do please! You should talk about it again with technicians and then you will see what they can do for you.

  I can understand that it is irritated, but these things can happen and I think that the ASP will be best for you help you. To be honest, I have good experience with my ASP. The repair goes very fast and the technicians are very friendly and knowledgeable. It of always nice to talk a bit with them.

  I m not a technician, but maybe they can fix it as a gesture of good will or if you only have to pay the motherboard and not Exchange

  Welcome them