BlackBerry 10 as my z10 keyboard sometimes does not work.

Similar Questions

• Smart keyboard sometimes does not work

  I have a smart keyboard connected to an iPad 12,9 Pro.

  Sometimes it stops working and I have to restart the iPad be responsive again.

  This is quite annoying because it happens 4 - 5 times a day.

  I think it's a software problem. I look forward to a solution from Apple.

  Hello alessandro2410,

  Thanks to ask questions on your Smart keyboard doesn't work don't not with iPad Pro sometimes. I understand how it is important to have a functional keyboard at any time since everything we do these days is on our devices. I'm happy to check this with you.

  To make sure the Smart keyboard until properly, I want to double check all of this help article: use your Smart with iPad Pro keyboard. If everything is correctly configured, at the end of this article is the section to get help, if there are any questions by using the intelligent keyboard with iPad Pro. If the keyboard stops working, I try to adjust the position of the iPad for a while and then re - implement Type position. I would like to ask some clarifying questions to try to win because of that.

  1. have you setting the position of the iPad for a moment, then put back in the position of Type help or you must go through all the steps, and he only reconnects after restarting the iPad?

  2. when it stops working? You mentioned that it does that 4 or 5 times a day, but it's after the iPad goes to sleep, or after you do not use it for 10 minutes, you can isolate when it no longer works to offer other options?

  3. have you noticed the disconnect keyboard started after 10 iOS upgrade only?

  Please provide information and work with me here in Apple Support communities. Have a great rest of your day.

• BlackBerry Blackberry Q5 q5 keyboard backlight does not work

  Hi, I bought the new BBQ5 about a week ago & keyboard backlight does not one.is day it hardware or software problem.

  I also downloaded the BB virual expert to check the sensors.i did not notice this light sensor sensor & proximity is not available. my version of the BB OS is also 10.2.1.3247.

  Please help me to resolve this issue. I use a lot in the night for mails etc.it composition is quite irrerarting with the backlight on the keyboard.

  Thanks in advance.

  Restart the system contributed to reslove the issue. Now the backlight key board turned on.

• Multimedia keys sometimes does not work

  HP Pavilion DV4 1290el

  Windows 7-32

  Multimedia buttons sometimes don't work (buttons on wifi/audio/multimedia etc. etc. at the top of the keyboard)

  My company send me a new laptop (HP Pavilion DV4 1290el).

  Multimedia keys sometimes freezes and does not work. Then I can't turn on the wifi radio.

  I tried:

  -update the firmware (F.66)

  -Reinstall the driver of quick buttons

  None of them does not solve my problem.

  Any suggestions?

  Thank you very much

  Hello

  See if a reset helps the issue.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Excite Pro AT10LE-A-108: after JB 4.3 external BT keyboard upgrade does not work

  Hi all!

  After update 4.2 JB JB 4.3 does not work my bluetooth keyboard.

  Pair ok, Tablet keyboard sees but does not.
  Please, do toshiba repair package or fix problem.

  On the other my android device (phone LG with 4.1.2) working this keyboard ok.

  Sorry, my English is very bad. (Google Translator)

  Thank you.

  [Keyboard Type | http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

  Okay, please, I want to downgrade 4.2 JB for this tablet, it's possible?

• Satellite A7330 S75Dt - keyboard backlight does not work

  Hello

  recently I bought this laptop A7330 S75Dt with windows 8, and after 2 days, the backlight of the keyboard has exploded.
  The Fn + Z combination indicates it's on and it should work, but it's not.
  I don't need it but its irritating that it does not work. I hope someone can help me.

  Thank you
  Luk

  Go to the BIOS by pressing the F2 key while under tension.
  Then go to advanced-> configuration of the system and check if the lighting of the option is enabled.

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• Integration of keyboard shortcut does not work without supervision on T450

  We received some new T450 for our company and I'm putting the shortcut keyboard on it integration tool but it does not work without supervision. I can install it manually with the command-> setup.exe/S/b/m/h, but I need to do for 400 machines with a deployment tool, and here I am stuck.

  I use the latest version of 5.51.001. It works very well for the T540p and more but is not visible for T450.

  Just to be clear, it installs successfully on T450 but does not work, if I push the buttons on the keyboard.

  OK, nevermind guys. I had to do a restart and everything worked.

• T410 AiO customer CAPS, NUM, and scroll keyboard stop does not work with PCoIP view desktop computers

  We have problems with our t410 AiO customers, where the CAPS, NUM and scroll stop lights on the keyboard do not work with view PCoIP desktop computers.

  I found the below information and a work around:
  If you use the Protocol PCoIP to display on a client system Ubuntu 10.04, the CAPS Lock, NUM Lock, and Scroll Lock lights on your keyboard do not work with desktop view. Although the lights do not work, the keys themselves work.
  Solution: Set the following configuration in a configuration file, such as/etc/vmware/config:
  mks.keyboard.useXkbSetNamedIndicator = 'TRUE '.

  The problem is this difficulty is already in place via the latest version of the HP, Z6A440, software that is installed within our Organization.

  What I discovered, is that the model that we initially bought for the test doesn't have this problem.  However, the models that we ordered since that time, DO have the problem and the solution above does not work as expected.

  The model originally ordered for test is still a customer of IOA t410... but there are 4 "under models' for customers of IOA t410... that we have to test is a H2W20AA, while those we receive and distribution are the H2W21AA model.

  No idea why, when connected to the desktop from view, that models of H2W21AA have this problem?

  H2W20AA is with Teradici PCoIP optimized, which can support PCoIP better, but H2W21AA is not with Teradici. That's the difference.

  However, the issue that you are experiencing does not matter in fact, we have not heard of this problem before. I would suggest that you do the following to see if there is no change:

  1. Go to download the latest VMware View 2.3.4 for t410, follow the instructions to install.
  2. If suggestion 1 does not work for you, try to connect to another VM group or set up a new machine virtual clean
  3. Call HP service center to save your problem for further investigation if the suggestion above did not work

• I can't locate any button screenshot on my internet explore and screenshot on my keyboard button does not work, how do I use my print screen?

  Im trying to print the screen turned on a facebook account and I can't find a button print screen on my toolbars and my screenshot key is not work anymore. I also tried to use FN + Insert and its does not work.

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: try the keyboard on the screen and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard
  
  Method 2: If the problem persists, you should contact the keyboard manufacturer for assistance.
   
  Hope this information helps.

• BlackBerry Smartphones middle of the space bar does not work?

  Hi all

  I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

  I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

  Is this a problem with my specific blackberry or this entire line has this problem?

  I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

  Thank you all!

  Hi and welcome to the Forums!

  I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

  If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

  I hope this helps!

  If this answers your question, please close the message by using the options on the key of the kudo.

  Thank you very much!

• bluetooth mobile keyboard wedge does not work before the beginning of the window

  Hello Microsoft,

  I bought the mobile bluetooth keyboard dock recently.
  It works not in the BIOS and CMOS to move but to start the window, everything is ok.
  I use dougle bluetooth to connect this with my computer keyboard.
  I already activated the USB keyboard in the CMOS using old PS2 Keyboard. But it does not work.
  Please help me to use my keyboard before the beginning of the window.
  Respect,
  Arkar

  Hello

  Which machine or laptop you are using.,.
  some of the model require Bluetooth patch file to complete, that patch file will be given by the laptop or desktop vendor, please contact their tech support toll free number.check with Bluetooth mouse also

• Case change keyboard shortcut does not work in the PL/SQL Editor

  I use the keyboard shortcut CTRL - SHIFT-"quite a bit to change the case of the code. I'm in the latest version of EA and this shortcut does not work for me in the PL/SQL Editor, but still does not work in SQL Editor. You do not know if this is normal or not, but miss me it.

  Unset for the Code Editor and spreadsheet and together for other category - then it will run in a SQL worksheet and an editor of proceedings

  The PPE of the cpu, if necessary, take a jstack and start a new thread.

• multiply sometimes does not work

  Hello

  IM work in cs6 effects to a movie. Im making cars that move and im trying their shadows to move separately.

  teas cars are all moving of their own composition and possibly added to a final composition where you see a lot of cars on a road.

  Here's my question:

  each separate car has its own shadowlayer that I imported a separate psd file.

  I multiply those layers of shade using the CTRL on my mac and when choosing the mode of fusion and then choosing to multiply.

  This works fine most of the time when I have a look at the final model (where all the cars are together), but sometimes it isn't and the shadow remains a standard solid color. I compared the comps that work with those who are not, and I see really no difference at all.

  However, it works when I add the shadow layer in the final model.

  I tried recording first... or that you restart. This may be a bug maybe?

  

  In the model

  

  in the final model (does not work)

  

  In the model of car

  

  In the final model (this one works very well)

  I just found out what it was!...

  apparently this little sunsymbol belonging to woking no model was not turned on in the final model. I feel pretty stupid it was... but glad that it works.

  It must be 2D. It is the style that the customer approved. Indeed, adding the model background in my truckscomp wouldve done the work... I tried... but it would have messed up my system. and as you know... im not an expert in sequelae still

  Thanks a lot for your help!