BlackBerry 10 auto-configuration VPN connection on Wifi networks

Similar Questions

• Is it possible to get Win 7 auto start VPN connection?

  Hey all,.

  Is it possible to get Windows 7 auto start VPN connection? Or can you recommend a 3rd party VPN client application?

  Thank you

  Hello

  You can make a batch file exe or cmd and autostart. The command line should be like this:

  RASPHONE d * where is * a name of your VPN connection

  For example: your Vpn connection is called my VPN

  The command line will be:

  RASPHONE d my VPN

• BlackBerry smartphones, I can't connect to wifi

  I can't connect to wifi

  I m still free wifi struggling its got an arrow can help u connect

• Smartphones from blackBerry Curve 8530 is not connecting to WiFi

  I have a blackberry curve 8530 and get a message Traoré says, "Failed to associate with the network." My Wi - Fi is not secure, but I implemented a filtering of MAC addresses. I entered the MAC address of my BB in the filter list, so it should work. I have a Linksys WRT54G2 router. My phone can see the network, but cannot connect. Any ideas?

  Hi mdishe01,

  Are you able to connect your BlackBerry to any other open network? If you disable the address filtering Mac is able to connect to the network in your BlackBerry?

• Never connect some WiFi networks...

  Sometimes, when you are traveling I'll find myself looking to take advantage of the wifi airport... about 50% of the time my mac connected without problem. The rest of the time he is there right and acts like it is connected but nothing never loads in the browser.  This happens only on wifi networks that require some sort of "disagreement with the terms" screen or a paywall.   If I leave everything and restart then sometimes it fixes, but not always, and it's a terrible solution.

  Anyone know why this kind of thing happen?

  If you connect OK 50% of the time, then you are doing very well.

  AirPort WiFi networks are often overcrowded with too many users trying to use the same network at the same time. In this case, the result is slow... or not... connections. Nature of the beast, I'm afraid.

  If you belong to a club of the airline which offers separate private space for its members, the WiFi in these areas almost always works fast and reliable.

  One thing that might help a little... is to remove from the list of networks that your MacBook has signed in the past, allowing him to quickly find available networks when you need a connection.

  Open System Preferences (gear on the dock icon)

  Open Network

  Click Wireless on the left to highlight Panel

  Click the Advanced Options button at the bottom right of the window

  Here you will see a list of wireless networks that your MacBook is connected to in the past

  Click on the name of a network that you no longer need to highlight

  Then, click on the - (less) button at the bottom of the list to remove this network

  Do the same for all the other networks that you no longer need

  Click OK at the bottom right of the window

  Click apply in the next window that appears

  Close the windows and then restart your MacBook

• BlackBerry Smartphones - not connected 2 WiFi network error message

  I had my curve 8520 for almost a year now and today after I deleted some apps, its saying that my phone is not connected 2 a wireless network and well obviously won't let me use bb app store or my weather apps. Please tell me how 2 fix it

  The first section is indeed for BB10...

  

  But if you keep reading, you will find the section for users of pre-BB10 (i.e. you):

  

  But remember... Here are the steps to perform in the order. Don't go to step 2 until you were correctly step 1.

• I can connect to wifi networks but cannot access the internet

  As the title says, I have no problem connecting to all types of wireless (password protected or not), but once I plugged in, there is always a message saying that I have limited access, and I will not be able to access internet since. It is not a problem specific to any router, it's just my laptop wireless. Direct connections (with an ethernet cable) work quite well. When I tried to solve the problems through windows I got the message error "wireless network connection is not a valid IP configuration.
  I have honestly tried most of the solutions out there but stuck on what I can do next

  Hello

  Thanks for posting in the Microsoft community. I understand that you are able to connect to a wireless network, however you are unable to access the Internet when it is connected to the wireless network.

  It would help if you could let us know about any changes made to the computer before the show.

  I suggest that you try the following steps and check.

  Method 1:

  Check out the link and follow the steps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Visit the link and try the troubleshooting provided steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if these methods on the other will respond and we can provide several methods.

   

• Re: Satellite L300D - unable to connect via WiFi network

  Any help please? -I just L300D with Vista professional.
  Crossed troubleshooting but still unable to connect via the wireless network - no probs with other laptops.

  When going through "Toshiba assist" message arrives "this wireless network device is disabled.

  Please activate the device"- button wireless is activated with light yellow?

  any ideas?

  Are you sure that the laptop wireless switch is on?
  Look in the Device Manager. Maybe it's the wireless network card disabled. So activate it.

  Also try an update of the WLAN driver. You can find it on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com

• BlackBerry Smartphones New Blackberry Curve 8520 - configuration of e-mail and network problems

  Hello! My friend bought a new Blackberry Curve 8520. It is based in South Africa. She is facing 2 problems: 1. in the corner right gprs/edge is displayed in small fonts, and she is not able to use the inernet for applications. The phone was for 30 hours, and he still has not changed. 2. When you complete the setup of e-mail, it is only given the option to select a professional e-mail address, and there is no option to add a personal e-mail address. Help, please! I made a move on the phone and also reset, but the problem persists.

  Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?

  You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

  Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

  Good luck.

• R7000: Smartphones connect to WiFi and can navigate using the browsers, but not Internet with applications

  Hi all,

  I just installed my new router WiFi R7000 and I feel some strange problems.

  My WiFi configuration consists of two WiFi networks, one on the 2.4 GHz frequency and the other on the frequency of 5 GHz.

  I have connected my two smartphones successfully to these two networks. The strange thing is that if I use all browsers, I am able to navigate, while if I run the application apps such as Google, Facebook, and LinkedIn, they are unable to get access to the Internet.

  I have the latest firmware installed (V1.0.6.28_1.1.83) and tried a hard reset and reconfiguration.

  This thing happened to someone?

  Thanks in advance

  I found the solution here http://forum.xda-developers.com/showthread.php?t=2177378

  I had to reduce the MTU to 1300 and now all seems fine

• WiFi 'cannot connect to this network.

  I recently bought a HP Pavilion 17-e049wm Walmart and since I started for the first time that there was this consistent issue; It does not connect to my home network, and if so, it disconnects within an hour and if I try to connect it says "unable to connect to this network. I am sure that the issue is not the cause of the wifi it works properly on any laptop in the House, as well as on all mobile devices. I even made sure the power management settings have been disabled and I checked all my drivers and they are all up to date. I noticed also recently the wifi indicator (white light on my hp) to become orange (airplane mode indicator) just before it says unable to connect to this network and then return whitens. I turned both low roaming if that matters. This laptop comes with windows 8, and as I mentioned previously, I checked all the drivers, so it can't be a hardware problem right? And if this isn't a problem with windows, so is there some special configuration needed for wifi networks to connect to a windows computer 8? Cause I read somewhere that the WEP keys are not supported and home my network security is WPA2-PSK. If I restart the computer, it connects fine but then the same thing happens again. The longest, it worked for 2-3 hours. Could also have something to do with the fact that wifi falls a lot? The other day because the windows 8 and our computer laptop windows 7 were running side by side and when the Internet has dropped, the windows 7 laptop then would say not access windows 8 would still display cannot connect to this network. And the strange thing is, every time the Internet drops on laptops, it works great on mobile devices like my iPod and the nexus 7. Now, I hope it's just a problem with wifi and that computers are just very sensitive to that particular network, but I don't know if there is a real physical problem with my laptop. It's the sixth day, I got it so if there is a problem I'm ready to go back but I don't know about you. So to sum up, given all of the above information, is the problem with the laptop, windows 8 or wifi? And in whatever the bat injured, how can it be solved?

  Thank you
  P.S. There are moments where the wifi works fine on other laptops, but the problem 'Unable to connect to this network' has not changed on the laptop to windows 8
  PPS there aren't any other portable windows 8 in the House

  Hello

  Check this box:

  http://mhotspot.com/blog/solution-for-cant-connect-to-WiFi-network-on-Windows-8-after-disconnecting/

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking-e-g-Windows-8/laptop-can-see-wirless-but-can-not-connect-please-help/TD-p/74803

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking-e-g-Windows-8/my-laptop-connecting-to-the-network-but-not-the-Internet/TD-p/411133

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking-e-g-Windows-8/WiFi-problem-with-my-brand-new-HP-laptop-envy-DV6-Windows-8/TD-p/2426441/page/4

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/HP-DeskJet-3050-J610-unable-to-connect-to-new-WiFi-network/TD-p/2533073

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• BlackBerry Smartphones Log In details for a Wifi

  Hi all

  whenever I connect to a Wifi, which requested details of connection after connecting and I click on "connect to wifi network" I can't enter my coordinates since I see I have a gray lock on a red background.

  I need to change some settings? You have any ideas?

  Thank you

  @TyW

  It worked in the end.

  When I opened Chrome I need confirm that I'm ok with the navigation to a server "unsecured" and then I could go into details.

  Data saver turned off all the time.

  Thank you

• Problem on WIN 7 WIFI network, but it works under WIN xp

  All of a sudden I can't connect certain WIFI network, before his job very well, now this network not visible,... but the same WIFI network connected in WIN XP

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• How to configure NAT for Hyper-V on laptop with wifi, wired and vpn connectivity

  Me, as I suspect a lot of people, I have a laptop with WiFi connection, cable connection and VPN connection (Cisco AnyConnect), which

  also uses a virtual adapter (activated when active). I searched for some time a way to be able to move to

  Hyper-V in VirtualBox. Blocker full for me is the need for a lot of my virtual machines to be able to connect to the

  Internet through 'the connection active' in the way that VirtualBox and VMWare Workstation/Player through their NAT feature.

  I'm not a networking wait, but after looking around, can't seem to find something that is simple enough for me to configure,

  with a minimum of resources, which allows me to connect a Hyper-V virtual network via a simple NAT device adapter

  all three potential network connections - most seem to not assume that one connection out of the machine, which of course does not

  me what I want.

  Three questions:

  1. is there a Windows application available that an adapter (like loopback) internal which acts as a real NAT device to one of the surfaces

  external access via the active network connections and through the Windows Firewall and any other antivirus, components etc. for

  the road to (i.e. behaves like a "normal app" inside Windows for internet access)? It would be the best option, because it would be

  "always there" when I run virtual machines

  2. display of my lack of knowledge around this feature, don't RRAS (and I know that this is not an option "minimum contact") allow you to

  Connect an internal network adapter to several external network adapters?

  3. on the Linux/OpenBSD various base/NAT routers, are everything that allow several external adapters and who are

  relatively easy to set up (by an independent expert of the network)?

  Really, we could do with this feature for Hyper-V on the desktop, but willing to work around him, if there is a way to at least the

  use virtual machines, once it is easy to install.

  Hello

  The question is more suited in the TechNet forums. So I would say you mention the link and send the request in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  For any information related to Windows, feel free to get back to us. We will be happy to help you.