BlackBerry 8250 new smartphones does not start with the connected SIM card

Similar Questions

• Laptop does not start with the connected usb device

  Hello
  Voila, I have a Sp6100 Pro Satellite, when I try to start whith a usb printer is connected, the laptop does not start. I have the latest version of the bios 1.90.

  THX,
  Barzot @+.

  Hello

  What you mean with start won t at all? Is there any kind of reaction if you press the power button / stop?

• new laptop does not start with the boot CD or DVD disk

  HP Pavilion laptop computer g6 brand new windows 7 Home premium 64-bit.  Updates Windows, updating the Bios and Telus security installed, otherwise the system is factory.

  I'd like to partition the hard drive partitions with Partition Wizard on a boot disk, maximum because I don't need a 650 GB partition to do the maintenance on more I like to keep my data and other separate files of my operating system.

  The DVD drive is set to boot first.  The DVD player works (made recovery discs, checked the content on the CD, etc.).

  What happens when I try to boot using the CD or DVD - the DVD drive sounds like it is being accessed, then stops and I get a blue screen. This happens as well with the diskette in the partition Wizard and recovery disks.  Whenever I start even if the bios is set to boot from the first DVD I press the esc key and reset the DVD to start everything first.

  I checked the disk the wizard partition on a desktop PC and it works fine.  I updated the bios after checking on the internet, as was the fix for this issue.  It don't did not help me.

  It took me a while, but I thought about it.  The laptop and DVD player with Windows 7 can't read a bootable disc, made by another computer.  It won't even read a USB stick formatted by another computer (Windows XP).

  What a pain.

• Inspiron 530 Win XP Home does not start with the TrendNet wireless card

  I just received 5/1 a refurbished Inspiron 530 530 Mini-Tower desktop: Intel Core 2 Quad processor Q6600 (8 MB L2 cache, 2.4 GHz, 1066FSB) Genuine Windows XP Home Edition. The PC didn't have any LAN card and I intend to use a working adapter TrendNet (COMPUSA) 54 Mbps Wireless G PCI I used very well with my old 4300 Dim run also Win XP Home. However, after that I booted up the new PC with the first series, I stopped him. I then opened and installed the card wireless in one of the 2 empty PCI slots. When I turned on the PC, surprise! The PC wouldn't start - it kept beeping with the glowing orange of front power button and turn off every two seconds, I then read the Inspiron 530 manual means that the motherboard has detected an error. Hello. I checked.

  I searched other posts in this forum and I've seen a few references to the boot configuration verification. However, installation of starting my PC doesn't have an option related to the wireless adapter.

  Someone help me please fix this error. I intend to reconnect the card on my old PC wireless again and start just to prove that the card is always good. I only removed a card video of him and the rest of the asis. (I've not carpet in my house is that reduces my chances to have fried the card when you remove or install.) I also touch the chassis of the PC before doing anything.)

  
  

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.2.1.537
  OS version: 10.2.1.1925
  Carrier: Beeline (KZ)

  Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

  Tried to activate or disable this setting, the result:

  On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

  Off - 1 min 17 sec

  What is the problem of the time difference?

  Good, thanks

• BlackBerry Pearl 9100 Smartphone does not go beyond the initial start-up

  I recently downloaded the BBM updated version and rebooted the phone, which made the phone completely useless. It does not start, everything is blocked to the Blackberry first loading page with the bar display 100% of State.

  Please help urgent that this phone is my life line

  Launch the BlackBerry in safe mode and go to Options > Advanced > Applications and delete that last charge (BBM) application, then restart the machine in normal mode.

  ***********
  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• C870-19(r) satellite does not start with the new SSD

  Hello

  I will update the Toshiba Satellite C870 19(r) with a Pro 840 Samsung SSD, but it does not start.

  He said: not found system.

  Post edited by: joch333n

  None found system means that there is no system installed on the SSD drive...

  What you trying to do?
  You start from a disk in order to install the new system?

  In this case, you should disable startup secure in the BIOS.
  I also recommend moving from UEFI mode MSC!

• BlackBerry 8530 Curve smartphones does not sync with my Microsoft Outlook 2010.

  Curve 8530 does not sync with my Microsoft Outlook 2010.

  Although I used a Palm Treo years, I am new to BB and Metro PCS. The OS is v5.0.0.973. (The Palm Treo has not correctly synchronized since this summer. that's why I got the Blackberry.) Some old Palm Treo data are saved as ASCII files).

  I connect my new BB 8530 via the USB port on my computer. From the Blackberry Desktop Manager 5.0.1 version, I click the icon synchronize. I select the boxes to synchronize the data of the Organizer, to update the time and date of the device and synchronize automatically. When I click on synchronize, the message box asks me if I want to configure synchronization settings now. Ok.

  He asks me to choose an application to synchronize. By clicking on the calendar, select Microsoft Outlook and 2 way to sync. Complete the installation schedule welcome.

  However, when I cliquerai to finish, I get the error message "Microsoft Outlook Connector error: no available message store.» The setting does not save.

  the same result for other applications.

  I shut down my computer and restarted. I deleted the Intellisync folder, as suggested in another post. still no synchronization.

  Sync Suggestions welcome!

  Davsco

  Hi and welcome to the Forums!

  Office of RIM 5.0.1 software tells you that you are using is not compatible with Outlook 2010. You need to upgrade to level 6.0 from the RIM of the Desktop for Outlook 2010 compatibility software. However, if you use Outlook 2010 64-bit, there currently is no version of RIM software which is compatible... only the 32-bit Outlook 2010 is currently compatible.

  • http://us.BlackBerry.com/apps-software/desktop/

  Good luck!

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• 7 does not start with a connected external Western Digital hardrives.

  I have two external hardrives WD, connected to a pc to the bridge under windows7.  When the hard drives are connected, Windows7 does not start.  It hangs on the black screen.  Without the disks attached, it starts very well.  Anyone know what I can do to not having to pick up leads outside whenever I want to start?

  Solved.

  Use Windows Update to install the update from Western Digital Technologies WD SES device released by Microsoft in January 2011.

  My system hangs is no longer with USB Legacy Support set to 'Auto '.

• Laptop does not start with LCD connected via an HDMI cable

  I have a laptop Toshiba A660 running windows 7 Home Premium. I use and external LCD connected via an HDMI cable. If I leave the cable connected to the computer when I turn it on most of the time it does not start. It hangs at the windows from logo. The only way I can boot is power off (by operating switch for a while) and remove the HDMI cable.

  Hello

  To update the display driver, following the steps outlined in the article below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  See the articles on how to set up two monitors:

  http://support.Microsoft.com/kb/976064

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=f5W9Hvf07IV

  I hope it helps

• Why my DVD does not start with the film and not on the menu?

  HI -.

  I'm just starting to use yet.

  I import my film as a timeline, my PSD as a Menu, link the button in the menu to the timeline and tie the end to the Timeline action to return to the Menu.  I get no error, when I check prior to construction.

  But when I play the DVD, the menu is entirely ignored.  The movie just started.  End action works and I can navigate the Menu using the remote control, but I want the disc to start with the Menu.

  What Miss me?

  TIA your instruction.

  JL

  Hello

  In this case, first of all, I would check my first piece of the project. You can check the first play in the drive properties in the properties panel.

  Click on the disk icon in the window of the chart and look at the properties of the disc in the properties panel.

  If you want your menu to play first you insert the disc in the drive, then this menu must be set as the first piece of theatre.

  I hope this works.

  Thank you

  Ramesh.