Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

Similar Questions

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• BlackBerry 8250 new smartphones does not start with the connected SIM card

  I'm having a problem with my new Blackberry of Virgin Media (mobile).  I just got it and when I have a connected SIM card I only get the loading screen timer and the blackberry does not start.  If I have no connected SIM card the device starts in the operating system, but was told that there is just no SIM connected (obviously).  Once I put the SIM card in again once it is stuck on the loading screen.  As you probably already figured out that I did many resets hard with the battery pull and it has not solved the problem.  A consultant because it would be greatly appreciated because the only advise I got support was remove the boot of sim and put it back and start again duh!

  Carrier - Virgin Media / Vodafone
  Model - 8520
  Version of the OS - 4.6.1
  Free space - 130679088 bytes

  BT device - I have the details as HDW - 22736-002 Rev 1 Ver 2 4509 (is that correct?)

  Apps & free space - nothing installed new device installation is not complete.
  Blackberry 4.6.1 Basic application
  Basque 4.6.1
  Galician 4.6.1
  softwqare system BlackBerry 4.6.1
  1.0.1.20 Application Center
  Attachment Service 4.6.1
  4.6.1 cards
  Messenger 4.6.0
  BrickBreaker 4.6.1
  browser 4.6.1
  documents to go 1.003.018
  configuration of e-mail application 4.6.1
  help 4.6.1
  Klondike 1.4.8
  4.6.1 Memopad
  password keeper 4.6.1
  Phone 4.6.1
  Sudoku 1.0.11
  4.6.1 tasks
  King of hold'em Texas 2.3.0
  Word Mole 4.6.1

  1 is the news provider's SIM card?

  Old to another device?

  2. do not place you a memory card in the camera?

  New media card?

  or from another device? What device?

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Reading takes a long time to start

  Even though I have good requirements, I have always problems in execution of Adobe first Pro CS5. Rendered in the preview window (reading) takes long to start and hick-ups in video and audio is displayed. Jump to a point in the script takes awhile, sometimes 10 seconds.

  Project

  My project contains four media (broadcasting sport event) MXF files, each long about a hour and 20 GB in size. I also imported certain components of an After Effect project. Videos audio files have already peak files, located in the same directory as the original files.

  Configuration

  Since I thought that the current 4 GB of RAM was the bottleneck, yesterday I bought some extra RAM and have now 9 GB works fine. Here is my configuration of my Dell XPS 435MT:

  • Processor: Intel Core i7 920 (2.66 GHz, 8 MB cache, 4.8GT / sec)
  • RAM: 9216 MB (3072 MB (3 x 1024) memory DDR3 1067 MHz + 6144 MB (3 x 2048) 1333 MHz DDR3)
  • HDD: 750 GB Serial ATA (7200 RPM)
  • Screen: 21.5 inches S2209W Widescreen Trans European Black Value (1920 x 1080) - DVI - D
  • Graphics card: 512 MB ATI Radeon 4850 card graphics card
  • Audio: Audio Integrated HDA 7.1 Dolby Digital capability
  • OS: Windows 7 64-bit

  
  

  First, preference Setup > memory is 6 for Adobe and 3 GB for other applications. First, the record was good, but after a few minutes, the beginning of a preview takes more time, once again. Sometimes after you quit and restart first, it's going well for a while.

  When previews took a long time to start, I started to see performance data. I do not have any other big process, my CPU keeps exhausted and my RAM is fairly constant at 4 GB. So, which seems to be OK.

  My hard drive might be a problem? I have a hard drive that is partitioned into two disks, where all programs are on C: and D: contains the project and all the video and audio files (a 60 GB of free space).

  Another small thing I spotted is that stuff in After Effects are deposited Summit whenever I open the project. For a specific component on AE, I already count 48 files peak. Other video files don't are not in peak filed again. Is first a new file of the art for all the imported components, even if some components are intact? I don't think this is the cause, but it seems strange.

  Are there other things to watch? Any help would be appreciated kindly.

  Requirements minimum ages being a DEDICATED for the video player. Adobe is very hard to be quite vague on this subject and many complaints have been posted here, but Adobe foolhardedly continues by saying only what is needed to install the program, do not to use it. Common wisdom is at least two better but three different physical disks.

• Still burned DVD takes a long time to load into the reader

  I created a DVD in Encore CS3.  The final DVD is approximately 60 minutes and has 4 menus created in Photoshop CS3.  I purchased the Dolby converted in first and used this file as PCM format indicated by a friend vs.   The DVD works fine but takes a long time to load in one of my DVD players.

  A Sony player, it takes between 40 minutes and up to 70 seconds to load and play the first menu.  Each time is different.

  (This same drive load purchased in-store Hollywood style DVD in about 15 seconds on average)

  In another Sony player my DVD on average about 25 seconds

  A Panasonic player, it takes about 15 seconds

  In a portable player from JVC, it takes about 8 seconds.

  That is what it is?  This DVD is created for replication in a large number, but I'm afraid the long loading time is a problem and you want to solve this problem before sending it to the wide for replication.

  Help, please

  Thank you

  EDM

  EDM,

  One consideration is that there is no DVD drive certified to play any burned DVD, only those press/replicated. Most do and do as well, with provisions, but some don't.

  Now for these provisions. High quality blank media will get a closer all the success, just like using a slower speed of the burn, as the max. These two considerations will get a close, as it is possible.

  What brand of blank media are you using? Verbatim and Taiyo Yuden are about as good as it gets.

  How fast you burn to? I would look into a speed in the middle of the range permitted by the combo of speed by the media and the burning speed. Slower is better than more fast.

  As Stanley, there may be differences with r and + R media and players. There has been much more a problem, but some players still might prefer a vs the other.

  Finally, when you say "replicated", do you mean that you send in a DLT to make a House of replication a glassmaster, where the DVD is going to be in a hurry? If Yes, these replicated discs will be like the Hollywood DVD and will be NOT burnt, as was your test drive. The question will be moot with these, as they will be DVD-videos, where your burned DVD is really a DVD - ROM.

  Good luck

  Hunt

• Computer HP laptop 14-d004tx - takes a long time to start whenever I turned it on

  It really bothers me that my new laptop, (just a week) when takes a lot of time before it starts. After the HP logo, it displays a blank page where my cursor can be moved, so he'll stay a very long time so I find myself stopping and then turn on again and again until it finally starts.

  Is this normal? It really takes a lot of my time specially I use my laptop for work. What should do?

  Thank you! I really need help here...

  Hello
  
  Since it is a week it would be better to contact HP in your area & report it.
  
  Meanwhile, a test of full hard disk & memory test by pressing F2 or F10 as soon as you turn on the system and on entering the BIOS, pass-> component test system Diagnostics.

• Router now takes a long time to connect to the internet

  Lately my internet was very slow for example that if I opened a browser for watching youtube videos of my favorite commentators, it takes so long to load, but Monday about 2 days ago, everything has been loading web pages and videos, now it takes forever to load anything on the internet im confused on what the problem is:(s'il vous plaît aider)

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         You get the error message?

  ·         You are able to access other websites other than Google/YouTube Web site successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

• Captivate 7 - Quiz questions take a long time to advance to the next

  So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

  When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

  I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

  Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

  Thanks in advance,

  Arthur

  I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

  

  Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

  As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

• Since the update to 36.0.1 Firefox takes a long time to start.

  V36.0.1 has been installed automatically yesterday and since then, it takes a minute or two so that it starts every time. I nhave tried to do a clean reinstall, and it made no difference. Any help would be appreciated.

  Hi dwilden, other users have reported that this problem was caused and can be solved by adjusting the parameters of their norton running affected systems software: https://support.mozilla.org/en-US/questions/1048938#answer-696520

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• Why dose my laptop take a long time to start?

  My lap top takes 3mins to start why?

  Hello

  Three minutes is not long however you can probably cut that with these methods.

  You can use these to control which startup programs. Many others who settle start-up are not
  really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
  load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
  can control the files they support (to be sure that you continue to use only). Those who are not common
  examples and not meant as a slam on these programs very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After reformatting Windows 7 laptop takes a long time to start and load office

  hiiii! I use the computer hp 620 laptop. who has windows 7 Home Edition premium installed with 4 GB of ram. c drive partition size is 250 GB. When I start my laptop it takes * a long-term on windows startup. then once this process is completed it must also load the desktop. I recently formmated my pc. 2nd question:-when I right click on my computer and click Properties. It shows the memory of 4 GB installed and usable 2.90 GB usable. I use windows 7 64-bit edition Home premium. Wait a rply

  First of all, I would like to launch the troubleshooter of Performance to see if there are problems.
  Then, use the steps listed in optimize Windows 7. This will usually help the most to get the best performance from your system.

  (1) open the resolution of performance issues by clicking on the button start , and then clicking Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click on search performance issues.

  (2) use the following link as a way to improve and optimize your configuration of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance#section_3

  (3) you can review how to speed up your computer.
  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=A3wXPV89pfU

  (4) If you have not already, delete the temporary Internet files of Internet Explorer. Loading these files can sometimes slow down the startup of your.
  Article number: 260897 - How to remove the content of the Internet temporary files folder
  http://support.Microsoft.com/kb/260897

  (5) run the Microsoft Safety Scanner to check that you don't have malware or viruses on your computer. They can slow a computer at startup too. This is a free download.
  You can download from the following link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this will help you with your computer start faster.

  Sincerely,

  Marilyn

• iTunes takes a long time to start because I have upgraded to Windows 10

  I upgraded from Windows 7 to Windows 10 a few months back.  Since iTunes then takes like 10 minutes to start.  I tried the setting in compatibility mode for Windows 7 and the other versions.  I tried to run as an administrator.  Nothing seems to work.  Is there a kind of diary where I might be able to see where it hangs at startup?

  Thank you

  Jim

  You should try to completely remove iTunes. Follow this link:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Download and install the latest version of iTunes from http://www.apple.com/itunes/download/ 12.4.1