BlackBerry 8520 smartphones connects to the computer

Similar Questions

• BlackBerry 8520 smartphones resetting to the factory settings

  Hi there at - there a way to reset a bb to factory settings without using the button of bb in advance thanks

  Without using the Blackberry Menu button?

  Set a password for security on the device, then enter the incorrect password on the device ten times.

  I don't think the Menu key will be necessary for this.

• BlackBerry 8520 smartphone support for the 9300 compatible charger?

  I was wondering if you could use the double kickstand charger 8520 with battery... with the spare 9300.They look the same?

  Thank you

  I know that the battery may charge... I don't think that he has contacts on the bottom of the bb. Except when I use the deffender Otter case those looks as if there are 2 contacts a little looking on the back of this thing...

• BlackBerry smartphone 8330 disconnect in the middle of the synchronization of the Manager Office, but still connected to the computer

  I am a new user.  I love my Blackberry 8330.

  However, yesterday I came across a problem where the 8330 disconnects constantly in the middle of operations with the Desktop Manager.  He does not often occur in one place.  I got several error types: connector specific error 0X80040fb3, cannot synchronize, etc.  Spontaneous disconnects are not confined to the calendar, tasks, or address book - it happened during all these and sometimes before it had even begun to synchronize.  I pulled the battery once.  It synced well after that just to have the same problems the next day.

  This happens in the middle of other operations using the Desktop Manager as well.  As the backup files.  It will shut off in the middle of one of the backup files, or will only stay connected long enough to a backup file.

  In all this, the computer recognizes the blackberry as connected and the blackberry continues to display the "connect to the computer.

  The Start Menu and taskbar will often hang or disappear after that the Desktop Manager ceases to recognize the Blackberry and then the Blackberry is always connected.  Once the Blackberry is disconnected, the start menu and taskbar is released from the hanging or reappears.

  Windows XP

  Office 2007

  Facebook, IheartRadio, Pandora, Slacker, Google Maps and a few other applications installed, Google search, My Verizon

  Also meet a few spontaneous reboots, but I think it has more to do with apps than anything else.  Some JVM 102 errors on restart.

  Feel free to ask me questions.  The Blackberry but frustrated love.  Have tried other things to search through the forum, but none solved the problem.

  JVM 102

  It's your first question, it solve first, probably will solve everything

  I hope that you have at least 1 good backup to restore after

• BlackBerry Smartphones phone connects to the computer

  my phone connect to my computer more. Help, please. I tried to reinstall the desktop software and it did nothing. I checked all the settings in my phone and nothing. battery pull and nothing. the last time that I am connected, it's make a backup when I upgraded my os phones. I use a blowtorch on the telus network. application Platform 6.4.0.210 version 6.0.0.448 (1907)

  I've had a few cases where the torch would not connect to the computer. I did a restart of the computer, and it was going well after. It is important that the desktop software manager is updated.

  After the re-definition of the computer, try a different USB port if there is still no communication. Also, try a different cable USB Blackberry. I had once a Blackberry USB cable go bad on me causing a lack of response.

  Jerry G.

• BlackBerry Smartphones Priv - connection to the computer as a drive with cable...

  You can connect the Priv a PC with the cable to access as a drive, especially for access to the SD card?   I had assumed would be immediate, easy, but the laptop does just not see it connected...?

  Some good news.

  Finally, I can get it to connect, but better as "Mount SD card", do not use Android file transfer.

  Certainly, there are only going to transfer different files Android app link provided in the MTP option in the phone under settings, buffer, top right options - USB connection to the computer, I had to kind of work, but I think it's a one-way arrangement therefore does not allow fiddling with files or data on the SD card.

  With the option of mounting SD, its worth knowing that the phone is not yet recognized, you need to pass options while its connected, so when switching back to Mount SD, it appears suddenly!

  I managed to move some files autour, and if I drop in the DCIM folder, Camera leader, they then appear within the app Photos, without the need to got to the unit records.

  Is worth knowing when you're connected, more, but not all of them simply disappear with the handset, but all are in their proper place, moved or otherwise, 30 seconds or more after the disconnection.

  Question NEXT, related to this, but could start anew thread; In my photos, I always kept a photograph or a scan of my passport, driving licence and stuff, amazing how much it is useful.  Priv does not read this map file, even if its same region in Photos.  The Passport can be pdf, is it possible to move files between the laptop and Priv autour so that it can read the docs and other things or is it possible to create a file on the SD card where the docs can be submitted and read by the priv...?  Indeed, where are the docs on Priv?  Ive schedules of my son on the map, but they do not seem to appear anywhere in the private and they are the .docx files.

  Thank you.

• BlackBerry Smartphones can not get my 8330 to connect to the computer

  Hello, this is a new phone - replacement of a previous 8330.  Initially it connected very well and I downloaded the new software for it - I am running 4.5 on both desktop and handheld computer, I was able to sync my contacts and apps for the new phone - everything seemed fine.  A few days later, I connected to my computer to update my calendar and it still not connected.  When I first log in, it says as well on handheld computer and the computer on which it is plugged - then it just stops.  I know that it is connected to the computer because the computer - simply not recognize Office Manager.  I deleted the program from the computer three times now (oh yes, I tried it on work and home computers) and re-installed and nothing seems to work.  If anyone has any ideas, please help - I called Telus technical support and they couldn't tell me a * beep * thing either!

  Cool! Gald you guessed it work.

  Take a second and solve the thread so that others will find your answer faster.

  Thank you

  Bifocals

• BlackBerry 8520 smartphones does not start

  Hello everyone I have a bb curve

  and it whont start and I did this

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely. this work of a force...

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track. ) but this one did so but my phone disconnect automatic coz it stats to start up again but not all the way Please help me I don't know what to do

  Thank you very much

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  It may be that you need to use something different with the procedure that you follow... see these:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State

  Good luck and let us know!

• BlackBerry 8520 smartphones turned off and won't turn on! Help!

  I may be wrong pressed a few buttons (sleep) and I woke up to see my vocation as a voice configuration 8520 and it was completed at 98% (so I thought it was better to leave full since he was almost finished). I woke up again a few hours later and she's not coming. I removed the battery several times, but only the red light comes on for a few seconds then it turns off and the screen remains blank... What I've done wrong and what I would do!

  Leave the device in 2 or 3 hours of charging and then, still connected to the charger cable, remove the battery of the device a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage). If it is not restart on the first attempt, leave several hours. I had a charge for two days before, she came back to life after extreme exhaustion of the battery. Every 3-4 hours with the device plugged into the charger, you can remove and replace the battery to see if it restarts.

  If this does not work, if your BlackBerry remains powered turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• BlackBerry 8330 smartphones not seen by computer

  Hi, I have a new 8330 and there is a disconnected alert Desktop Manager, when I connect to the computer and will not see the PIN code. When I go in the options and try to connect, it does not detect the device. It is not the Blackberry because it works on other computers (Vista and XP systems) but not the main I need which is an ACER Windows XP. On the Blackberry itself it does not even show the little indicator "connected" on the battery icon and it will appear on the computer as an external storage device when I connect via USB. I connected it directly to all six ports and nothing.

  I followed all of the threads that I could find, making several clean reinstalls 4.2, 4.3, 4.7. I closed off the power to the USB ports as recommended, out the battery for a few minutes, and I started in safe mode, but also removed the? driver in Device Manager. When in safe mode I at least get the connection with the mass storage option the 8330 that I say yes to but don't get always the computer to see the blackberry as an external storage even. The wizzard asks me if I want to install the software but does nothing about installing it.

  Any ideas? Thanks in advance

  After having plugged the BB into a USB port and clicking on COMPUTER to view all of your readers, it does not show as a drive?

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• iPod classic connects to the computer

  Hello

  I have an iPod classic, since 2005.

  It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...

  so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...

  really annoying me now that I want to sync music on the classic...

  tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either

  Jake

  When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer?  When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?

  Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load?  Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector.  An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.

  If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power.  It can be worn or damaged.  Therefore, it does not connect to the USB port on the computer.  However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).

  Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

  Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

  If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle

  and parts are available from sources like eBay.

  Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

  Pricing of the Service - The Apple iPod Support

  NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

  The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.