BlackBerry Curve Smartphones to synchronize with Outlook - could not find in the file system table

I just upgraded from a Pearl to a curve, loaded the desktop software and tried to sync my MS Outlook, but it gives an error message "Cannot find table in the file system.

I found a thread that advocates a solution (ID KB15278), but it did not work.  The final solution is to uninstall and reinstall the desktop software, and when I try to do it via the Control Panel, it will not remove the software.  I seem to have both Version 4.2 and 4.7 of the software on my PC.

Anyone got any suggestions?

not serious. Read this one.

http://www.BlackBerry.com/BTSC/KB03490
Internal error 2738. Could not access VBscript.

Tags: BlackBerry Smartphones

Similar Questions

  • How blackBerry smartphones to synchronize with outlook business contact mgr

    have the 9530 model was buying and using the service from verizon.   synchs well with Outlook 2007 contacts.   However, I added Bishop contact Business Outlook because it fits my needs better.    But I can't figure out how to get the 9530 to synchronize with BCM instead.  I want the 'soft contacts on the blackberry to display account information, as well as the list of individual contacts who work there.   It's the way it is displayed in Outlook BCM.    Any ideas? Thanks in advance!

    From my understanding, Desktop Manager will be synchronized to Outlook, not BCM.

  • Smartphones blackBerry curve no longer synchronize with Microsoft Outlook

    All of a sudden today, my phone will not sync with Outlook.  He begins to synchronize and a box pops up that says "Blackberry Desktop Manager has encountered a problem and needs to close."  He made a stop at the synchronization in the grille and continues to stop at the '95 of 2403 records folder '.  Then a box will appear asking if I want to send the error to Microsoft, which I did.  When I went on the link they said that the problem is with the RIM.

    Any suggestions for me are very much appreciated!

    Thank you
    Amy

    Thanks much for the reply.  I ended up finding something online late yesterday and tried.  He had to remove my Intellisync folder and then sync.  And it worked.  .... I wish that had not taken me all day - but thank God the problem is solved. Thank you very, very much for the reply!

    Amy

  • Multiple Blackberry blackBerry Smartphones and synchronization with Outlook calendars

    Hello world

    I have 3 different calendars on my "BOLD", but when I sync with Outlook, it syncs only one of these calendars. Is anyway to combine all 3 caldenars to one on the Blackberry, so all appointments will be synchronized with Outlook? I have 3 calendars in error, not by design.

    Thank you

    Darrell

    Take a look at this article

    http://www.BlackBerry.com/BTSC/KB19240

  • BlackBerry Z10 BBZ10 of synchronization with Outlook

    Can someone tell me if it is possible to synchronize with the Outlook calendar BBZ10. The software Link does not seem to allow that

    Currently, the z10 will connect with your Contacts and calendars with outlook via USB to your PC. BlackBerry announced they have it in the next version.  If you use outlook.com or other services icould, it may be synchronized. It is the same for all android phones. If you do not have an outlook.com or cloud service, then you can send your month since outlook calendars to your z10 and click on the Calendar and it will update your calendar z10. It is the same with your contacts. It is a temporary solution until they release the USB sync with outlook.

  • BlackBerry smartphones could not connect to the WiFi system at home - "unable to get an IP address.

    Like many of you, I have WiFi connection problems with my new BB9700.

    When I'm out of the House, I can see my BB, find local WiFI hotspots and I can connect to them immediately.

    However, when I get home, my BB doesn't connect to my WiFi, return the following error message:

    Unable to connect

    Reason: Could not obtain an IP address

    I downloaded the latest version of the software BB (now running version 5.0.0.351), cold all started in view (router, telephone, coffee table and the cat) but still the same error. My foot pain, the cat is not about me and I still can't connect to the House! Of course, my carrier connection works perfectly like their outrageous fees structure... (They are 3G or Hutchinson Telecom under a different name).

    My WiFi access provider (PCCW / HK Netvigator) checked my system configuration and report that everything works correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the guy from the hotline can see when I connect each of them to the system.

    I tried different combinations of switching the usual options on and off on the BB but always get a connection.

    SO, any of you kind of people you have a solution other than the cat suddenly once again?

    Thanks in advance,

    RS. HK.

    Dear Mike,

    I basically solved this issue will me a LOT of searching.

    Step 1.

    Router

    MAC address of my Blackberry 9700 has added to the list of MAC access on my router configuration. (Subject to the router to save settings)

    Step 2.

    Router

    Reset the Security Type on router configuration None (presented to the router to save settings)

    Step 3.

    BlackBerry Bold 9700

    Delete the profile of my WiFi at home in the WiFi Options

    Step 4.

    BlackBerry Bold 9700

    Reentry into the profile of my WiFi at home in WiFi Configuration

    WiFi in the House. SUCCESS AT LAST!

    Step 5.

    BlackBerry Bold 9700

    In manage connections, unchecked Mobile Network (i.e. Off and No Way can connect to my 3G service provider)

    Step 6.

    Turn off the Blackberry Bold 9700.

    Battery pull.

    Restart the Blackberry Bold 9700.

    The House immediately found of WiFi Internet and all other functions working perfectly.

    Only problem is now my home network is unsecured. (Can't get the IP address if WEP security is enabled)

    So it's all good now and forward it to someone else who has the same problem.

    Happy Chinese new year!

    Rick

    Hong Kong

  • How can I fix my registry on my windows XP system? ___I get error: ___Windows could not start because the file is missing or corrupt: __\WINDOWS\system32\config\SYSTEM___I had this error of windows once today and am not sure what to do for a fix.

    I have a Dell Inspiron 5100.

    I tried searching for a solution on what to do, but am confused about what I should do or what would be the best way.

    I found this site: http://support.microsoft.com/kb/307545 and it listed a process, but was told not to use this method "If your computer has an OEM operating system . I have not installed the operating system, so I guess it's OEM.

    Listed on the page (the page of the link I gave above) it says ago guided help. What is a safe way to fix my registry XP installed OEM?

    I really don't know what to do or how to do it. Any help that could be provided would be great.

    I did some research on your problem and found the following MS link it describes your problem and how to fix your luck problem
    http://support.Microsoft.com/kb/314477

  • Cannot open the disk could not be locked the file

    Error when you try to share a drive between two virtual machines.  I have two web servers VM and a disk shared data, each web server has 20 GB for operating system disks, and they share a 500 GB drive for data.  I use clustered OCFS2 file system later.

    See the 500 GB drive, but when we turn on the two VM the second throws the following error:

    "An error was received from the ESX host turning on VM Myweb1.

    Cannot open disk ' / vmfs/volumes/MyWeb1/MWeb1.vmdk' or one of the snapshot disks it depends on.

    Cannot lock the file.

    I've read about this error before but can't find where and understand that it's either because I don't set them up right to start with, or that there is some extra config I can do in the s flat *.vmx file?

    Here's what we did when creating virtual machines and a shared disk, is there something missing

    Create 2 new virtual machines for Web servers with disks of 40GB of basis for the operating system and then add a new hard drive to one of the virtual machines in vSphere BUT must be correctly configured for sharing between multiple virtual machines.

    For example, to change the settings > Add > hard drive > create a new virtual disk > choose size and choose 'Thick eager disposition to zero' > under 'Virtual Device Node' choose a "SCSI (1:0)" then finish.

    Once the drive has been zero there would stay out in 'Change settings' > click new controller SCSI 1 and choose virtual disks 'Physical' can be shared between virtual machines on any server.

    Change the settings of the 2nd virtual machine and choose Add hard drive, choose existing, navigate to which you have created the VM 1 drive, make sure you assign it the same SCSI (1:0).

    Thanks a lot a lot a lot for any help in advance

    Did you also step on 2 VM below

    After the disc has been zero go back outside to 'Change settings' > click new controller SCSI 1 and choose virtual disks 'Physical' can be shared between virtual machines on any server.

  • I just downloaded 13 items for my new Mac and get a message on my Mac that the file could not be imported, the file is in a format not recognized

    I just bought a new I - Mac, as I've used PC in the past.  Recently downloaded 13 elements (for MAC) but when I try to open, I get the message "file could not be imported.  The file is in a format not recognized and 'no application ready to open the document.  What should do?

    your file download again or stopped prematurely.

  • BlackBerry Smartphones to synchronize with Outlook

    A few days ago Windows Update installed updates to MS Outlook 2007 and since then my Blackberry Torch 9800 won´t synch any longer. No error message - it's just up to a point on the synchronization and the feezes bar it. Even when I click on cancel synchronization it won´t answer.

    I ve uninstall updates of Outlook, but the problem persists.

    Can someone help me?

    Thank you

    Charles

    cdpopoff wrote:

    I ve uninstalled the software in the hope that it would reinstall just by plugging the torch into the PC

    Oh my... Windows does not work like that... MAC systems work like this (most of the time), but not Windows. For Windows, you must install the device drivers and other before attaching the unit to the system.

    In any case... then try here... I was going to then advises you to remove and reinstall the Desktop software, but it would be perhaps more things to do for removal to go... but we will add more later if we...

    (1) obtain a new download of the RIM Desktop software:

    (2) install the software on your PC Desktop

    (3) start the configuration Organizer:

    • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager
    • KB23681 How to configure settings to synchronize Organizer data using BlackBerry Desktop Software 6.0

    If all goes well, who's going to make things again.

    Good luck and let us know!

  • Problem syncing of Smartphones blackBerry curve of BBr 9320 with outlook 2010

    After installation of office 2010, it is impossible to synchronize my BBR wth my PC; I get the following message:

    Thanks for your help.

    Message:

    Caught_com_error exception. Description (); (null); Error(): 2147312566 (0x80029C4A);

    ErrorMessage(): error loading of the library/DLL dy type; Source (), (null)

    Hello GAUTHEY and welcome to the community of BlackBerry Support Forums.

    Sorry to hear you have a synchronization problem.

    Are you getting this error when you synchronize your Contacts, calendar, tasks, or memos?

    If you were to try a one-way synchronization of device to Outlook, it works? What a way to feature Outlook?

    Thank you!

  • BlackBerry Smartphones BlackBerry Desktop crashing into synchronization with outlook calendar

    Hello

    I use BBD 7.0.0.43 and Outlook 2010 on Windows 7 32 bit. Whenever I have sync the BB device, Desktop software freezes while the calendar is syncing. In the Desktop_xxx.log there find on this time, the line Rim.Desktop.Services.Device | 0 | [DatabaseAccess::GetDatabaseRecordIN:0 x...] GetDatabaseRecord several times.

    Someone at - it an idea?

    Best regards - Jan

    After a reset, it works!

  • BlackBerry Smartphones Prob. synchronization with outlook

    BB Pearl syncing w / Oulook recurring appts please an hour earlier on device on PC.  It worked fine until about a week ago.  Tried to reload/update of software of Office BB, same problem. Also verified that time PC and Windows are well positioned to update for DST.  Help!

    Thank you, actually spoke to a representative at RIM today and cleared the calendar on the BB, and then re-sync and it worked very well.  I hope that this will be it and it will never happen, but in any case the same should fix it if it isn't.

    Thanks for the help.

  • BlackBerry smartphones how synchronize us outlook 'contacts' not 'address book '?

    Hello

    I have desktop 6.0.0.285 software, and it seems that there is no option to synchronize contacts... single address book... did I miss something blinding?

    More precisely: Blackberry Desktop Software (device software version 6.0.0.285)

    and uh... a nice on contacts... wrong.

    See you soon!

  • access denied. Could not find specified path\file win\sys32\rundll.exe

    Using win xp professional. computer stoped allowing administrative privileges to the owner. I went under safe mode and created another administrator account and it works fine.  However, I can't return permissions owners without deleting his account. I can account to work right? Do I have to remove his account? Does anyone know what caused this problem? How can I stop it happening again?

    In his account, try this:
    Download and then run the file .exe association difficulty http://www.dougknox.com/xp/file_assoc.htm

Maybe you are looking for

  • Links e-mail and filters - the wish list items?

    Compose an e-mail containing a link does not support stable link until the message is saved or sent to the car. This limitation is known to be intentional in the documentation. However, in the good old Eudora, press a hot key while clicking on a link

  • GetPanelMenuBar() function PROBLEM

    Hello I have to get the ID of the menubar that is associated with a group of experts. The menu bar associated with the Panel is indicated in the control panel interface (.uir: Control Panel-> board settings-> Menu bar). The Committee is loaded into m

  • His stutters on Pavilion dv4-1120us

    I had my Pavilion dv4 1120us for Christmas and put it in place. It is under Vista Home premium with SP1. I noticed that from time to time during sound playback slows and stutters for a few seconds and then the catch usually upward. He made cela hung

  • Monitor does not immediately turn on

    My monitor used to work properly and then, after going to sleep when not to use the computer for a given period, he (the monitor) would not go back. Pressing Ctrl-Alt-Del has worked for a short while then I had to turn on the monitor and turn it back

  • APEX in a table, add 3 default empty lines

    HelloI created a tabular presentation on my APEX page.Whenever he has some data in the table, it is displayed as below:I have to add 3 empty rows by default to the same when the first page load.In the dynamic actions, I tried to add a Java Script tha