BlackBerry devices with multiple phones of switching software

Similar Questions

• ID BlackBerry blackBerry 10 with multiple devices

  Hello

  Currently my BlackBerry ID is associated with a device of BB 7.1 and my BB PlayBook. I think of acquring a BB10 device. My BlackBerry ID will be dissociated from my BB 7.1 (and I hope not not my BB PlayBook) if I chose to use it with my BB10?

  Thank you

  gajariam

  gajariam wrote:

  Hello

  Currently my BlackBerry ID is associated with a device of BB 7.1 and my BB PlayBook. I think of acquring a BB10 device. My BlackBerry ID will be dissociated from my BB 7.1 (and I hope not not my BB PlayBook) if I chose to use it with my BB10?

  Thank you

  gajariam

  You can stay connected to the device of BB10 an app world, a single device BBOS (5,6,7 or 7.1) and a simultaneous PlayBook and the BBM on a single device.

  Although you are able to use the app on your simultaneous BBOS world, BB10 and PlayBook with the same ID, you won't be able to use BBM on your device 7.1 if you switch to BB10.

• Using Facetime and iMessage with multiple phone numbers

  I often travel internationally. When abroad, I get a local SIM card and so a local phone number. The problem is, anyone trying to send messages to my becomes phone number inside a bounced message until I go home. I am looking for a solution to this problem. What I want to do logically is to pass all my iMessage and Facetime messages to my phone number internal to any international phone number that I have the chance to have for the week or two, I'm out of the country, without actually transferring phone calls for the international number.

  How can I accomplish this?

  If during the passage of an international SIM inside, if I use a different AppleID to save the number, can I add the domestic AppleID to iMessage and Facetime and have forward SMS messages to internal phone to my phone number - actually give my 2 phone numbers for text and using Facetime?

  What happens if I have a second iPhone (say one IS minimal) think I swap my SIM home - then I have two iPhones, one with an international SIM card and the other with an internal SIM card - then - I associate the two phones with the same AppleID (as if I had the same AppleID on an iPhone and iPAD) and make it work? In other words, a text Message sent to my iPhone internal SIM also towards my international SIM iPhone? This I must have my internal iPhone with me, or I can leave home and have it still work?

  Any suggestions for other ways to solve this problem?

  Thank you!

  HU

  You should always be available for the Apple ID that is associated with a phone number at one point.

  SMS is out of scope for this, because it is a function of carrier managed by your carrier at that time and linked to your SIM card.

  You put a new SIM card in your phone, FaceTime and Messages should register again your Apple ID for/with this new phone number shortly after. I do not think it deal only with the functions of automatic reference to FaceTime or Messages, because they are themselves a transfer function.

  To the Apple server... "go get my friend with the Apple ID of [email protected]." Server Apple think and said: "OK, it uses the 888-555-1212 phone number right now, so I'll send your application there.

  Ring, ring... you download a FaceTime application.

• Update blackBerry Smartphones BlackBerry Device with Mac

  Hello

  I have three questions about my BlackBerry "BOLD":

  1.) as a Mac user I want to update my device software. However I don't find this function in the BB Desktop Manager for Mac. Any advice?

  2.) I need to add some languages like Chinese or Japanese to my BB "BOLD". How?

  3.) is is possible to download pictures on my BB? Ideally in a size reduced?

  Thanks for the help!

  .Exe files are for installation on a Windows OS. You will not be able to install using the latter on a Mac OS. The BlackBerry Desktop Manager for Mac uses WebSL which connects to a server to find the latest version of the software provided by your provider of wireless to your device.

  If you notice that the Chinese is not available, it is because your wireless provider did not in the package. You can contact them for more information.

• How to get the current wording of the BlackBerry device with the BlackBerry App?

  Hello!

  I'm new to BlackBerry,

  Can u tell me pls, how to get the current language of the device using the program...

  PLS, suggest me...

  Locale.getDefaultForSystem () will give you the regional settings currently selected.

• Problem blackBerry Smartphones with Office Outlook 2010 sync software

  I have 2 new computers;

  Dell Inspiron One running Windows 7 (64) and desktop software works fine with Outlook 2010.

  Samsung R530 laptop computer under windows 7 (32) bits and Desktop is not related to Outlook 2010.

  I tried to install version 6 which did not work. I also tried since version 5 and the upgrade and it does not work.

  Any suggestions would be welcome.

  Thanks, I've tried most of the solutions, but does not yet. I'll try again in the morning and let you know how me.

• Merge devices with multiple network interfaces

  Hello

  Is it possible to add several interfaces to a device network, but merged into a single device?

  For example, we have a lot of HP and Dell servers that have usually a network interface and an interface of management (ILO or iDRAC).

  It would be useful to be able to add two interfaces while having them mapped on the same server in NMS. The network interface would show us the availability on the network and the management interface may alert us hardware problems via SNMP.

  Anyone knows if this is possible, or do we need to have more than one entry for each server?

  Thanks in advance

  Ewan

  Hi Ewan,

  If the INVESTIGATION period is not recognized by the operating system, we most likely would not be able to draw the individual IP addresses of the ILO or the iDRAC. You can present this as a feature request in the ideas of the community section.

  Thank you

• Security for the COD file question: is it possible to extract the BlackBerry devices .cod file?

  Is it possible to extract the BlackBerry devices .cod file?

  We want to ship the BlackBerry device with our application installed.

  I was wondering if need to add additional security.

  Installing drivers USB BlackBerry Desktop Manager, connect the BlackBerry to the PC via USB/Bluetooth and «save the JavaLoader.exe u your_module_here»

  PS JavaLoader.exe comes with the BlackBerry development Java (JDE) environment.

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• BlackBerry software blackberry 10 data is not compatible with the version of the software of the device you are currently using

  Hello

  My update of 10.3.1.1565 sali writing entry to the top on my phone.  so I tried the downgrade to 10.2.1 to do all my files are gone, however I thought I was smart by making this morning during the execution of 10.3.1.1565 a full backup before attempting the downgrade to os 10.2.1 through BlackBerry Link

  In any case I had to restore my device to 10.3.1.1565 and now when I try to do a restore by using the .bbb (backup) I created to present IE get the following error message:

  BlackBerry 10 data is not compatible with the version of the software of the device you are currently using

  versions of the software on my phone now and the version of the software when I did my backup are exactly the same 10.3.1.1565.  I am able to restore my user files and applications ect, because it proposes to make a partial restoration,., but my contacts and don't forget files are now gone.  I NEED THEM.  How can I get that back...

  Help, please...

  Thank you

  Hello

  I thought about it.  so I thought I'd post.  Apparently the BlackBerry pulled the 10.3.1.1565 update.  Anway don't know what happened over butI usng Shenshi and grabbing an update of another carrier, after that, so I'm now able to do a full restore using my old BBB file.

• Handshaking DMM with multiple switching devices - DAQmx error

  Hello.
  I am trying to create a loop of the handshake with DMM (PXI-4071), SWITCH (PXI-2569) and MUX (PXI-2575). The three instruments are in segment 2 chassis PXI-1045 (locations, 8, 9 and 10) and I use the ways of PXI trigger in the triggers of the route.
  I followed the article NOR 'Multimodule Scanning with National Instruments switches' - I modified the example NI SWITCH "niSwitchDMMSwitchHandshaking" to set up another SWITCH, but when I tried to run the example, I got an error:
  
  0xbffa6b9a - no lines recorded could be found between the device in the road. (screenshot pop up is in the attachment). It is the function of niSwitch_InitiateScan to the second switch that returned an error.

  PIX trigger change has no effect.
  I tried the CVI and LabVIEW examples with the same result.
  I even tried to use two 2575 MUXes - same result.

  Can someone tell me what I am doing wrong?

  Hi Pavel,

  I checked that the component that controls the routing of the TTL for the PXI is included in NOR-DMM 3.0.2 (latest version as of 06/14/2010).  NOR-DMM 3.0.1 contains an older version of the TTL routing code and will therefore place several comprehensive lines scanning advanced on the same trigger.

  Unfortunately, the component which controls TTL routing is one of the constituent elements of the software installed OR lower, and thus we do not expose it to the user.  For that to work, we would need to uninstall almost all the software components of NOR, which is a major undertaking.  Here's what I recommend instead:

  For now, we will Garland triggers one switch to another.  This will allow us to start development in OR-Switch; as soon as OR distributes a program, you simply change the triggers as they all point to the same TTL line.  This will allow switches to operate in parallel rather than in series, and the passage of the switch of your project can run faster.

  If we have to absolutely exploit the switches at the same time, I would recommend either uninstall all software of OR or get a machine with a fresh install of XP and then install not newer than 8.9.5, OR DMM 3.0.1 DAQmx software and NI - Switch3.8.

  As I mentioned earlier, NEITHER is aware of breaking backward compatibility and we are committed to reintroduce the old features in a future release of the pilot.

  Keep this thread bookmark and post back in a month or two and I'll let you know if we have any updates.

  Have a great day!

• Pair blackBerry smartphones my BB8330 with multiple devices at the same time?

  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  TeslasBB wrote:
  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  You can only pair one device at a time to your 8330, or any other phone besides.  The "pairs" are saved in the phone, you can use one or the other and you will not have to pair it again.  Once you turn on your bluetooth device and the phone is turned on, they will find each other again.

  Hope this helps,

• Smartphones blackBerry update with At & t sim T-mobile phone

  I have a unlocked T-Mobile Blackberry Bold 9900 that needs put at software level however, I unlocked my phone and switch to the AT & T. Which leaves me with the question of the operating system... can I select T-Mobile or AT & T when I reload my OS with a sim card from AT & T on an unlocked T-Mobile phone?

  nativescorpion wrote:
  Select T-Mobile or AT & T when I reload my OS with a sim card from AT & T on an unlocked T-Mobile phone?

  You choose this when?

  It is not really important. Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model.

• I could develop Java Application for Blackberry device software version 5.0 to 6.0 JDE

  Hi, expert,

  I saw this line of the ' BlackBerry Java Development Environment - 4.7.0 - fundamentals Guide'.

  It is said:

  ===============================

  With each major version of the BlackBerry Device Software and the FMV of BlackBerry, Research In Motion includes the
  corresponding Java API and version of the BlackBerry® Java® development environment. The version of the BlackBerry device
  Software determines the version of the BlackBerry® integrated development environment that you can use to develop
  applications. For example, RIM released BlackBerry Device Software version 4.0 and BlackBerry JDE version 4.0 in even
  time. BlackBerry JDE version 4.0 supports APIs that were introduced in BlackBerry Device Software version 4.0
  and BlackBerry JVM version 4.0.

  The applications that you create by using BlackBerry JDE Version 4.0 only work on BlackBerry devices
  running BlackBerry Device Software version 4.0 or later.

  =========================

  The last sentence talking about version 4.0 of JDE. I think that would mean that I could not develop a java application on JDE 6.0 for Blackberry 5.0 version of the software, even if I do not use any new API to 6.0. However, it seems to me that it is a useless limitation. Could someone throw some lights on it?

  I'm going to agree with superdirt here.

  I have the 5.0 OS update of applications work well on OS 5.0, 6.0 and 7.0 of the OS OS phones.  I try not to recompile for levels of the OS, if I can, and so far I've been perfectly safe with OS 5.0 running on the later levels of the operating system.  So you should be able to get away with just using OS 5.0.

  Not that it is important for you, but I just thought I documents some historical information about level changes.  .

  As far as I know it 2 change cod in the file format, one to the 4.0 OS and the other in OS 4.2.  Therefore, if you want to run anything in OS 6.0 or above, it must be compiled in OS 4.2 or higher.  Again, I have applications compiled to OS 4.2 running on OS 6.0, without no problem devices.

  There have been changes to the API - the result is that the code that works in OS xx does not work in OS yy where yy is after xx.  I hit a few of them and have so far managed to rework the code so that it works very well on both levels of the operating system.  In general it is things that I do wrong anyway, as the older operating systems (from memory) are not as strict on when the event Thread must be used.

  The problem with OS 4.7 compatibility is an impact and to get more of this, for devices touch screen only, I compile using OS 4.7.  If an application that uses only the functionality that was available in the OS 4.2, I compile on OS 4.2 for non touch screen phones and OS 4.7 for touchscreen phones.  And everything works fine.

  I hope this helps.

• Change of Smartphones from blackBerry Device Software from Rogers AT & T

  I have a 8800 AT & T bought.  I unlocked it and I use it at the Canada on the Rogers network.  I want to change the software to the software of Rogers.

  I've updated the OS to 4.5 using the file of Rogers, but remain AT & T configurations.  How to switch to Rogers/view/configuration of the program?

  Thank you.

  MrVain wrote:

  I can live with the splash screen.

  What I can't live with is-

  * The ugly icons AT & T

  * The left button that is attached to a PPT or PTT function that doesn't work here.

  * The absence of cards on my main screen.

  * everything is organised differently from what I got used to with previous balckberries.

  If it's just a theme thing, please tell me where to find the most frequent that most Rogers Blackberry come with by default.  If there is more than that, please let me know as well.

  1 change the themes. You can get the theme that you want for free from many places and if you want a specific theme of Rogers, read here:

  http://www.BlackBerryFAQ.com/index.php/How_to_Add_Vendor_Locked_Themes

  Other free and commercial themes are here:

  http://www.BlackBerryForums.com/Media-Center/

  2. on your BB > Options > screen/keyboard > scroll key of convenience options and set them as you wish.

  3. where is your card? In a folder? Go ahead, highlight (Don't icon) and press Menu > move and drag it to the arrow in the folder and drop it there and then look on your main screen. (this process is in line with your version of the OS on the device and may vary slightly).

  4. move your autour icons where you grew up used to be. Highlight the icon you want to move > Menu > move and scroll anywhere. I don't know what your old device looked like, so move them all around you.

  Good luck.