BlackBerry Smartphones Bb 8310 firmware no plus no Outlook synchronization

Similar Questions

• Phone and blackBerry Smartphone installation last firmware update starts

  Info on the device

  Carrier: Bell

  Model: BlackBerry Bold 9780

  OS version: 6... something

  I have BlackBerry Protect and made a backup yesterday (July 30, 2012)

  Apps and free space

  A battery pull fix your problem?  After trying to install the latest update, which continued to install after 4 hours, I pulled the battery.

  When you write your question

  How can I get the load to the top of the screen to access my phone?

  My phone had OS6 installed at the time it was released. Today, I decided to update to the latest version of the OS6. I downloaded the update through my device, and then click the button install. There is a prompt message warning that the installation can take 2 hours or more. After 2 hours, I started the monitoring device and noticed that there seems to be a pattern to the load up screen. 1 loading screen screen 2) black with LED light red 3) the load screen and then ends with a bright white screen 4) back to the black screen with LED Red 5) repeat this pattern.  I waited another hour to see if there was no change in the situation, but nothing. So I did a hard reset (battery pull). After waiting 5 minutes, I put the battery in and now I get this screen load pattern.

  How can I pass the loading screens to access my phone again?

  How do I erase and reload my camera?

  If I erase and reload my camera, can I recharge my BlackBerry protect the back upward?

  I would greatly appreciate any help or advice on this matter as soon as POSSIBLE!

  Hello and welcome to the community!

  (Credit JSanders)

  There are two methods for recovering for you to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• BlackBerry Smartphones run-time error when you try to synchronize the Blackberry

  I recently updated from the Blackberry pearl for the "BOLD" with the new desktop software. Since the upgrade, I am more able to synchronize microsoft Outlook for my Blackberry "BOLD". When you try to configure the synchronization I recievethe Runtime error:

  Impossible to find in the file system table. I tried all kinds of patches without solution, does anyone have any suggestions?

  Hi and welcome to the Forums!

  I found this KB, although the wording of the error is just a bit different... but maybe it'll help?

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB15278&SLIC...

  Good luck!

• BlackBerry Smartphones ARM11: Touchscreen firmware update failed

  Please I need urgent help.

  I have connected my 9520 Storm to my computer and blackberry desktop manager told me that I had an update. So I decided to update. During the update process, when he says to connect my camera to the JAVA virtual machine comes up with the following error.

  ARM11: Touchscreen firmware update failed

  Device error: 302

  Has no task: INPUT_SYS

  Files:

  Line: 0

  SP = 0X1784EAF0

  LR = 0X16119DD9

  PC-0X16118A90

  I tried to reinstall the operating system of all possible ways. From loader.exe, Office Manager, but I find myself coming back to this same error message.

  Please, I need emergency aid. Please...

  Hello SmoothRider,

  Thanks for the reply but I was able to get the ot to start work. I had the phone screen has changed, and immediately I put in the battery, that I was asked to reload the software I did and tadaaaa... It worked all fine again. I guess that the error had something to do with the material for the screen.

  Thank you

• Sync blackBerry smartphone Curve 8310 with outlook address book

  Hi guys, I'm very new to blackberry and need your help.  Recently my company gave me a BB Curve 8310, all set up by them.  We have a BES.  My calendar and email works great.  No problems.  It's also good (round trip) sync with my outlook contacts.

  My problem is with the company address book.  I was expecting when I compose an email it will go automatically pick the employees of the company when I start typing their name, as it happens on my outlook 2007.  But it's not.  All the time I have to type the full email address as [email protected].  However, it's looking for my personal contact to my contact list outlook 2007 personal.

  Help, please

  If you are on a BES you have to do what is called a search. So if you're writing an email you can start typing in the name of a person. This should display a drop down menu where you can choose between 'Email ' or 'Search' If you choose search it will search for the name on the Global address book, and then you can select it. You should also have the option after he found the name to add the name of your contacts if you do not have to search for this person yet

• Text of blackBerry Smartphones BB 8310 Red

  I get messages in red text and I don't know why. I responded and had confirmed delivery but no return. What is the reason for the red text?

  This is normally a message 'Level 1' flag.  Messages coming in and are set up as 'Level 1' will be highlighted... in your case, red, in other models and providers that they can be bold.

  To change to normal email (Google, Yahoo!, etc.), connect to your provider's Web site and go to where you Manager your email addresses through their service.  Check the filters that you have for the phone... you can then add or edit to designate which emails come out as 'Level 1' messages highlighted.  I have mine set for my wife, for example.

  If you have a Blackberry Enterprise Server through your business you can also change the priority, through them, as well as via the Options > Advanced Options > Security Options > General settings, and then change the settings there.

  In addition, you can change the way your phone notifies you (even if you can not change the color) by going to your profile, select the profile, press the menu key (left of trackball), select Edit and then settings level 1 Messages.

  If that doesn't help or you have any other questions, I would like to know or contact your service provider.  Hope that helps!

• BlackBerry Smartphones version latest Firmware for Australian "BOLD"

  Hello

  Can someone pls confirm what the last version number of the firmware is for the "BOLD" in Australia (Optus) and how can I get the latest version on the phone?

  Thank you!

  Here is a link to the latest OS for 9000...

  http://www.BlackBerryForums.com/General-9000-series-discussion-bold/151071-latest-OS-bold-9000-4-6-0...

  Follow the directions as posted and in the displayed sequence, and you will be fine.

• BlackBerry smartphone Curve 8310 not turn on

  I was trying to upgrade the software when my computer shuts down... now my BB does not illuminate.  Just get the flashing red light.  Computer no longer recognizes the BB when pluged with using the USB cable.

  No idea how fix?  Is there a reset button on the BB?

  Well before reading the last post and shortly after my last post, I decided to re - install the BB desktop on my computer software.  After that my BB was recognized again and I have been able to re - install the OS on the 8310.  Just new to new configuration as if.

  Thanks for the help

• BlackBerry smartphones please help - Firmware update

  Hi all

  I now live in the Portugal, and I asked to unlock my Blackberry 9000 "BOLD" to use it here.

  I always use the V.4.6.0.303 (Platform 4.0.0.248) of Orange. I want to update to V.5.0, but the operator here in the Portugal, is this possible? and it crashes my Blackberry for Orange?

  Help, please.

  Thank you all.

  All the best wishes for Christmas.

  Your

  Peter

  You can update your BlackBerry by using an operating system of any company in the world.  If you look at the top positions in each category of these forums (aka 'sticky'), you'll see instructions for updating your phone using the OS from another carrier.  This will not affect your phone with Orange, unless you need technical support on their part and they have not yet released the OS you have installed.  Not to worry though, any support that you need to lie here in these forums.

  I hope that helps you.

• Software blackBerry Smartphones BB 8310 problem

  Hello!

  I have a BB Curve 8310. Durig the software update my internet conection failed and I needed to restart my computer.

  after reboot I tried to continue the update of software, but I will put this masage «Office Manager BB cannot communicate the Copy whit BB device»

  right now my phone does not work!

  What can I do now? enybody can help me please?

  Follow the instructions here to download and install the OS manually.  The operating system for download may be differenct carrier as yours, but it does not matter whence downloading.   Just follow the instructions exactly.

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/236833-latest-OS-8310-4-5-0-313...

• BlackBerry smartphones HELP! 507 error plus error when download is my biggest nightmare!

  Please help with my problem... I woke up this morning with my "BOLD" with a white screen and "Reload software 507" error... Since follow-up, I have some advice on the forums with a similar error, but without success.

  When I connect my "BOLD" for the PC, the Desktop Manager says essentially disconnected at the top and 'none' to the device at the bottom. When I try to update via the application loader, I enter my pin code and he's looking for the OS, then finally I get the message "an error occurred while downloading software for your device, try again later". My internet connection is definitely work. The error message also alternates between 507 and 561.

  I also downloaded the latest OS via the site Web de Blackberry directly to my PC and then run that. Same evetually problems when you are trying to connect/setting to date.

  Are there solutions? Thanks for your help.

  Follow the instrutcitons (exactly) to download and install the operating system in the first post of this thread.

  http://www.BlackBerryForums.com/General-9700-series-discussion-bold-2/239270-latest-OS-9700-5-0-0-16...

• BlackBerry Smartphones New User: Questions about the internal clock synchronization, software updated

  Hellko Forum.

  For two weeks, I use a Blackberry Bold 9900 with OS7.1 and I am very satisfied with the device.

  But there are some questions for which I have found no solution:

  (*) Looking back at my old Siemens S10D or SK65, they had an option to synchronize the internal clock with time of the GSM network information. Will there be a similar option in the Bold 9900? What I found was an option in the date and time settings. But when I put "Government aktualisieren" (setting the time) on 'automatic' then time switches to October 5, 2013, 12:20 and nothing happens. Is it possible to connect to an NTP server? If so, where to enter the address?

  (*) On this Web page http://de.blackberry.com/software/smartphones/update/blackberry7-os.html?LID=de:bb:support:update - of... Describes how to upgrade the software of the smartphone "over the air". But I can't find this option. Where the developer has hidden this feature?

  Thanks a lot for the answers in advance

  Best regards

  JueDan

  Hello again,

  noone has an answer to my questions?

• BlackBerry smartphones to access BB applications. Microsoft Outlook 2007

  Hey BlackBerriers Support...

  What smartphone BB parameters must be chosen on Outlook2007 Microsoft to set Outlook APP to access BB APPS(Calendar, Notes, Tasks, Contacts, etc...)

  Magicberry application is not the analysis of the file.

  Please, type requested location options Outlook 2007 to set the BB APPS; IE: outlk APP/tools/general/mobile/add parameters accounts/etc...

  Kind regards...

  Hello

  I'm not sure I understand your question, but here's a knockout that explains how set up the synchronisation between your PIM (Outlook, for example) and your BB (via USB or BT):

  • KB03315 How set up the synchronisation of data using BlackBerry Desktop Software organizer

  If that does not contain what you need, please try your question again, perhaps with more details so that we can have a chance to understand your request.

  Good luck and let us know!

  PS - MagicBerry has nothing to do with the synchronization between a BB and Outlook. MagicBerry is designed to analyze the IPD or BBB file, but the RIM itself desktop software provides synchronization between Outlook and the BB. So I'm not sure what part MagicBerry plays in your application.

• BlackBerry Smartphones Can I push coordinated phone to Outlook?

  My vision of the contact information on the PC ended up corrupted so I created another folder and moved all the Outlook contact data in this folder (as a precaution).

  Then I deleted all the data in my Outlook contacts.

  I hoped to do was to push data from the Bold 9650 to Outlook, restocking effectively my contacts list.  The data on the phone are good.  However, when I connect to the computer and it Desktop Manager attempts to sync the contacts, it detects all the deleted contacts in Outlook and request if it can delete all contacts on the phone.  I want it doing the opposite, I want that he take the data from the phone and transfer it to Outlook.

  Suggestions?

  Thank you

  Jim

  Hello and welcome to the community!

  I never really got to do what you say, but I think the first time you connect a new BB to desktop PC/computer software, you can to perform a 1-way synchronization in both directions. Try to say Desktop software 'forget' your BB and then configure it as she, it is new to the desktop software. Oh... and, btw, take a backup as soon as POSSIBLE before you do anything else, just in case...

  If this fails, then you can, by using the desktop software, export your contacts to a CSV file that you can then import into Outlook.

  • KB24488 How to export contacts from a smart phone BlackBerry with BlackBerry Desktop Software 6

  Good luck!

• BlackBerry smartphones cannot get Roxio to work; can I synchronize 2 computers?

  My work laptop is an old (3 years) Sony Vaio VGN - 250 and I continue to C++ runtime errors when I try to put the storm on Roxio Media Manager via DM. I get "abnormal termination of the program."

  Since I have a desktop Dell more recent home, just download the drivers from Blackberry media to the 2nd computer and media sync to my computer at home? What I have to install the DM together on the 2nd computer and what can I do? My iTunes is on the computer at home in any case, it is an important function for me.

  I am a newbie to BB. I had 3 Motorola Q in 2 years and Motorola told me that my problem was trying to use 2 computers to one phone and that I shouldn't do that. Can I use two computers with the BB?

  Thank you all.

  Download BlackBerry Media Sync on my computer at the House and then sync iTunes to the storm was child's play. Thank you.