BlackBerry smartphones "Input Sytem error - the system is restarted."

Similar Questions

• BlackBerry Smartphones "Input system error" "the system is restarted.

  I have been using my 9000 "BOLD" for 8 months, it has started to display the message "system error" "the system is restarted.

  When I push the internet browser, but now when I press "check spelling" on a sms message or email I am composing.

  I tried a hard and soft reset, but the problem persists.

  This problem can be solved without exchanging the phone?

  I've updated my "BOLD" using the Blackberry Desktop Manager on my computer, it took about 20 minutes, because it seems to read, save, stripout and reloading, which seems to have solved the problem.

  Some homescreen icons end up in a different order, but you can move it back.

• Smart phone BlackBerry Smartphones does not meet the system requirements that are needed to support Blackberry App World

  Hello

  I just all new BB Curve 8900 on Vodafone. Its the first BB I've owned and I seem to have a bit of trouble. When I try to download the App World, I get the following error message:

  "Device does not meet the system requirements that are needed to support Blackberry App World"

  How can this be?

  OK then... interesting for Vodafone to push support far... Well, by I guess.

  So I guess that I change their instructions... rather than to remove an installed version of the AppWorld in the way they suggest, I suggest go to:

  Homescreen > Options > Advanced Options > Applications

  See if BB AppWorld is listed as installed. If so, highlight (but do not click) it and then press the BBKey and select Delete. If she wasn't there, then continue on these steps.

  Then do a batt pull reboot:

  With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

  Then re - activate your THS:

  Homescreen > Options > Advanced Options > host Routing Table > BBKey > sign up now

  Then re - send all the service books:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&SLIC...

  Then do another reboot batt-pop.

  Then, get a new link for AppWorld from here:

  http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download

  And re - download and install it.

  I hope it's going to go right. If not, then it could still be useful a call to Vodafone...

  See you soon!

• Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hello

  My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

  Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

  So what problem here? and whats solution for that?

  
  

  

  has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

  http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• BlackBerry Smartphones without attachment in the transmission of emails

  When sending emails with attachments, attachments do not go through.

  No idea why?

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • KB10509 E-mail messages with attachments sent from the BlackBerry smartphone are received without the attachment

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• BlackBerry Smartphones - untrapped exception error message: webkit shared instance unavailable: null

  I was browsing a website via google when the page is empty and the above message came. I can access is no longer browsing the internet on my blackberry just got the message.

  I don't know if I'm on track to restart MDS connection service, after looking at the help sections? Only problem is that I have not the slightest idea how to do this.

  Interestingly, I can still access my facebook and ebay apps just won't use google or internet browser.

  Any help much appreciated.

  Hi mollypiper

  Welcome to the Forums of the BlackBerry Support

  Have you recently installed a new application on your device? If you then uninstall or undo the changes that you did before this error appeared on your device. Also, try these steps and see if that helps:

  1 - Save your pocket computer.

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • You expect a registration messages in your Inbox messages.

  2 remove and return your Service book

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Expect an enrollment message arrives in your Inbox for each e-mail address you have.

  3. and then do a restart of battery like that pull while the device is powered on remove your battery wait for a min. then reinsert back

  Or you can call your service provider for further assistance. Try it and tell us.

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• Can't backup windows because Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))

  can not backup windows because: Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\marcel\Documents\Youcam file. Error: (the system cannot find the specified file. (0 x 80070002)).

  Maybe it's because I disabled the camera to prevent other people using the computer?

  [Moved from comments]

  Hi Marrcel,

  Thank you for keeping us posted.

  The issue can be due to turning the camera off. I suggest you to activate the camera and try.

  Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• XP - error: the system cannot find the specified file.

  I was installing Windows XP Service Pack 3 today and it worked very well until he came to update registry after the installation process, after what is happening the installation closes and then displays an error "the system cannot find the file specified." I tried to close all programs, and then restart and shut down everything that runs when the computer starts and which also failed.

  Hello
   
  
  1. have you downloaded the stand-alone package for the service Pack 3 or are you using Windows update?
  2. are you able to boot to the desktop now?
  
  Method 1.
  Run Disk Cleanup and disable the security software and t hen try the same installation and check.
  Want to t he article below for disk cleanup:
  http://support.Microsoft.com/kb/310312
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update, Error 8007000 b - "fsutil resource setautoreset true C:\ ' returns the message "error: the system cannot find the file specified. '. »

  Tried to do a Windows Update and received the error message
  Windows Update 8007000 b error

  I tried the solution proposed in the windows of the promp command of the Administrators account

  true fsutil resource setautoreset C:\
  
  and received the error message.

  Error: The system cannot find the specified file.

  Vista is installed on the C: drive

  What now?

  Problem disappeared.

  I downloaded two no microsoft updates and restarted my computer. Then, I downloaded the updates from microsoft that now installed successfully.

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  I installed ENLWI-G2 802.11 g Wireless PCI Adapter in my Dell Optiplex 760 with XP SP3 32-bit Windows. But it gives me a blue screen with the error:

  Hardware malfunction NMI: parity check / memory parity error * the system stopped *.

  How to solve this error?

  Try to switch on the memory modules. Ask the MS site for more information on the specific error.

• What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  What is causing the error event ' BCM42RLY service failed to start due to the following error: the system cannot find the file specified "Event Id 7000

  Hello

  1. Since when are you facing this problem?

  2. What is the number of brand and model of the computer?

  3. have you made changes on the computer recently?

  BCM42RLY is a Broadcom network card driver. I suggest that you uninstall and reinstall the drivers and check if it helps.
  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  Hope the information is useful.

• Error "the system cannot find the specified file. (0 x 8007002)"when you try to bacup on external hard drive.

  original title: the backup help.  I can't run a backup.  Windows Vista 64-bit.  Get the error "the system cannot find the specified file. (0 x 8007002) ideas?

  My last successful backup has been 12/12/2010!    I am backup on an external hard drive.  I installed the KB947821 hotfix successfully, but the backup still does not work.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/0e0af440-1da6-4fe4-8B44-872078ec4911

  I'll go through this link try others did for the resolution measures