BlackBerry Smartphones my BB Curve turns on; the red light blinks

Similar Questions

• Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

  Hi all

  Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

  Thank you

  Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

  I hope that you have a previous backup, you won't be able to recover your data

• BlackBerry smartphones after 3 days my flashlight died - red light shows but does not illuminate.

  I got my flame long enough to set up my e-mail account and run the battery down (about 3 days). I put the phone to charge for the second time and were not able to next turn to the since then.

  I use AT & T and have the Torch 9850.

  I received Dec 25 and not really turn on or start together until Dec 28 and used 28 Dec - Dec 30 when he ran down on battery and close.  I've loaded and charged and charged and I see the red light at the top right, but nothing happens. New years BB Bold 2012 ads just rubbed salt into my new year!

  Any suggestions on how to get this restart or do I have a lemon for Christmas?

  1. remove the battery

  2 - Set your phone on the charger with the battery removed

  3 reinsert the battery

  bottom white-4 with a clock as the picture shows (not a problem)... after a while, that he will be gone and you can reuse your blackberry

  5 - let it get completely reloaded

  hope that it works because my friend had the same problem after that the battery has been completely drained!

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• BlackBerry Smartphones Dead unit Curve 8310 - at the end of the roll!

  While I was downloading an update, my Blackberry when dead (low power). I unplugged to recharge and now I get nothing but a flashing red light on the device. BlackBerry Desktop Software does not recognize when it's plugged in so I can't download the software or restoration unit.

  Hey usfaexec,

  Welcome to the community of BlackBerry Support Forums.

  Try to force the detection when reloading the software of the device, this is how: http://t.co/UMdcrn5 to get your BlackBerry back to life.

• Trinitron TV turns off. The red light blinks 7 times

  I have A FD Trinitron WEGA. It works perfectly for the past year 8 and a half. Recently, he died while we watch. The red on the front of the TV blinks 7 times. I wonder if a repair is required, and how much it will cost, thank you for your help.

  Hi joehui,

  Check whether in the TV, clock/Timer is set. If so, disable the timed operation parameters.

  If the TV is connected to a power strip or surge protector, remove the power strip or surge protector and plug it directly into the wall outlet. If the problem is resolved, the problem is with the power strip or surge protector and not the TV.

  Follow the steps below to perform a power reset:

  • Turn off the TV.
  • Unplug the power cord of the TV from the power outlet.
  • Let the TV remain without power for 60 seconds.
  • Plug the power cord into the power outlet.
  • Turn on the TV.

  If the problem is still not resolved after following all the steps of troubleshooting, service may be required. Locate the centers of the closest authorized repair the link below.

  https://eService.Sony.com

  The exact cost of the repair can be determined only after a physical examination of the TV. You can contact the service centers to know exactly the cost of repair.

  If my post answered your question, please mark it as an "accepted Solution".

• Problems of blackBerry Smartphones upgrade my Curve 8520 to the new version of the 5.0 software

  Hello

  I tried to update my BB Curve with the new software last night... I supported everything first... he crossed the 4 step process of update, but blocked on "restart" & just stood there.

  I know he said do not interrupt or disconnect during the update, so I went to bed & leaves to do it's thing... after 6 hours, he had not moved, I had to kill it.

  Now I've lost my contacts, history, files etc... purpose that I know they are on my PC somewhere because the update system has done its own backup, so I have to be able to 'restore' myself...

  Please can you help me?

  Thanks in advance, Simon

  Hi & Welcome to the community... !!

  First of all, please let us know, reloading the OS on blackberry is successful or not, so successuful then gr8.

  Secondly, as you said, you supported your device first of all, if you can restore the data from there, other wise, you can recover from the default backup location, where DM is saved automatically.

• BlackBerry Smartphones how can I turn on the radio?

  I just got my phone and I tried to connect to yahoo messenger and it said that my radio is turned off. I tried to send a text, and he says: my radio is off and I can't send a message. How can I fix it? Thanks in advance

  You should have an icon 'Manage connections' on the homescreen.  Which allows to turn on mobile network.

• Ex720 turns on and off the red light blinks 8 times continuously

  LED blinks 8 times continuously and turns on or off tv

  Follow the steps below to troubleshoot the TV.

• The red light blinks and I can't print.

  I reinstalled, activated and deactivated, changed the ink and still no luck.

  Thank you for the information.  From what you describe, looks like the printer's mistake out there, but don't not giving much information about what is at the origin of the problem.  I found this document on the flashing of the patterns of light for your printer that should help you to find the cause of the problem and fix it.  If the document can help you to work around the problem, you may need to get a new printer.

• The red light blinks and the battery is connected

  I have the adapter plugged in to charge my battery and it flashes red, then how to stop flashing?

  I would contact the customer to the manufacturer of your computer for this problem.

• Why my blackberry used blackBerry Smartphones allow me to connect to the wifi no checkmark?

  My blackberry 8520 curve does not connect to the wifi and there is a whitedash in the area, whereas it should be a green check mark...

  I have airtel connection wi - fi and router DIgisol instead of my house...

  Hello

  Read these articles and see if they apply.

  Thank you

  Bifocals

  KB03892 Differences in browsers on the BlackBerry smartphone

  Includes a video describing the different browsers and contains the following links to correct this information, see:

  • KB11678 The BlackBerry smartphone user cannot connect to the Internet with the BlackBerry smartphone.
  • KB03710 The Internet browser icon does not appear on the BlackBerry smartphone.
  • KB12971 The BlackBerry smartphone user is unable to display a specific web page using the Internet browser.

• BlackBerry 8900 smartphones will be no more power up and a red light blinks!

  I have a new 8900 and put in place all OK.  It now will not power and all I have is the red light flashes intermittently. Have tried removing the battery but no joy.

  Someone at - it ideas please?

  If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• How to turn off the blue lights under the speakers on Satellite P100?

  Does anyone know how to turn off the blue lights that lie beneath the speakers on a Satellite P100? They are evil in my sight!

  Thank you, John.

  Hello

  You are a lucky man. This is a very new unit and I wish that I would also have one of the new Satellite models. But you know, the money is the key :(
  However, I don't think that it is possible to put out these fires.
  In my opinion, it is a part of the design of laptops. It seems very futuristically.

• Re: Satellite L300 - how to turn off the green light below the F11 key?

  Hi, I have a Satellite L300

  There is a green light on as the key F11. Given that this happened only some keys on my keyboard, I use a usb keyboard for now without any problems. How do I turn off the green light or is it a fault of keyboard?

  Hello

  to be honest, I don't know anything about l300, but maybe you need to press NumLock to turn it off.