Ex720 turns on and off the red light blinks 8 times continuously

Similar Questions

• Trinitron TV turns off. The red light blinks 7 times

  I have A FD Trinitron WEGA. It works perfectly for the past year 8 and a half. Recently, he died while we watch. The red on the front of the TV blinks 7 times. I wonder if a repair is required, and how much it will cost, thank you for your help.

  Hi joehui,

  Check whether in the TV, clock/Timer is set. If so, disable the timed operation parameters.

  If the TV is connected to a power strip or surge protector, remove the power strip or surge protector and plug it directly into the wall outlet. If the problem is resolved, the problem is with the power strip or surge protector and not the TV.

  Follow the steps below to perform a power reset:

  • Turn off the TV.
  • Unplug the power cord of the TV from the power outlet.
  • Let the TV remain without power for 60 seconds.
  • Plug the power cord into the power outlet.
  • Turn on the TV.

  If the problem is still not resolved after following all the steps of troubleshooting, service may be required. Locate the centers of the closest authorized repair the link below.

  https://eService.Sony.com

  The exact cost of the repair can be determined only after a physical examination of the TV. You can contact the service centers to know exactly the cost of repair.

  If my post answered your question, please mark it as an "accepted Solution".

• My KDSR70XBR2 turned off and now only red light blinks six times then pause of 2 seconds followed

  TV off last night and gave a warning of the temperature.  I turn it off, put a fan behind it, but it still blinks six times then 2 second pause followed by six flashes and pause.  I did that for about 18 hours now.

  Help, please.

  The x 6 times standby light flashing indicates that the device has a power problem and may require services. To find an authorized service of Sony to your TV in your area go to:

  https://eService.Sony.com/webrma/Web/index.do

  Nathan_SD

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• BlackBerry Smartphones my BB Curve turns on; the red light blinks

  My bb 8330 curve will not turn on, charge or do anything other than flash the red light to me. I tried removing the battery and tried to reload, but nothing seems to help. Any ideas?

  Nevermind, I solved the problem by removing my memory card.

• KDL-55HX750 red light blinks 3 times

  My TV no longer works, it feeds on. that it snaps and then the power light turns RED and flashes 3 times repeatedly. Please help me, cause I can't believe I have to pay so much to replace the main Board.

  TV works fine. I found that I had downloaded the version of firmware USA instead of the version of the MEA. Once I downloaded the correct software copied on the USB, the TV updated Firmware accordingly.

  Thank you

• Turns on and off the Alienware X 51

  Hello. My Alienware x 51 R2 is having a problem starting. A few days ago, I was using the computer when suddenly, the screen went red and audio started stuttering. This continued for a few seconds before it shuts down completely. Now, when you press the power button, fans and lights come on for a split second, the system beeps once, then turns off completely and then repeats this process until it is unplugged. I tried unplugging all devices, unplug the power cable and plug it into a different plug and open the computer to check if fans are blocked. I have upgraded to Windows 10 Monday and it started to happen Wednesday. Can anyone tell if this is a fixable problem or a faulty piece of equipment that needs to be replaced? Thanks in advance.

  Hello

  Try to make a drain to everything first. To perform a drain of power supply, follow the steps below.

  • Power the system off and unplug the power cord.
  • Disconnect all external devices (mouse, keyboard, etc.)
  • Press and hold the power button for 1 minute.
  • Connect the new and turn on the system.

  If he continues to do the same thing, try to clear the CMOS jumper. Click here to view a message from Chris that explains how to do this.

• Turns on and off the screen Dell ST2210

  Monitor turns on and turns off.  Second monitor connected to the HDMI port works fine.

  Hello

  You can see this thread and follow the solutions listed by the technical support engineer.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/monitor-keeps-turning-off/d4330d44-6a8f-4113-A525-9456684fa01b
  Have you tried a different VGA cable. Maybe it's a coincidence, but the cable itself could have hurt at the time of the update.

• How to turn on and off the monitor on a calendar? I use hp 6100 as a screen and I would like to

  HP TouchSmart 610, Windows 7 64-bit is used for the public display of information.

  I would like to find a way to plan the operation monitor ON and OFF. I want to put the monitor during the night.

  What would you suggest?

  Hello

  NirCmd download here:

  http://www.NirSoft.NET/utils/NirCmd.html

  NirCmd is a tool for command line tiny and free to do anything

  The zip file contains 2 .exe files, it is easier to install one that goes into your windows directory.

  Then make 2 simple batch files, using the following scripts:

  to turn off the display option:

  off @echo.

  Nircmd.exe monitor off

  and to turn on:

  off @echo.

  Nircmd.exe monitor off

  Then use the windows scheduler to automate 2 batch files and make sure that your power options in windows are set to never turn off your computer or a screen.

  I hope that helps!

• The red light blinks and the battery is connected

  I have the adapter plugged in to charge my battery and it flashes red, then how to stop flashing?

  I would contact the customer to the manufacturer of your computer for this problem.

• I have problems turning on my computer, sometimes I have it turn on and off the hard path of startup. Because it goes to the system again and then a blue screen. What is the hard drive?

  I have to leave my computer on to avoid having to turn it off with the power off button.  Otherwise, I have to turn on & off with the power button.  When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it.  So, I press the power button to continue until initialization starts normally.

  Hello

  1. You did it last changes before the show?
  2. What is the error message/code what do you see with the blue screen?
  3. What is your operating system?
  4. Are you able to boot to the desktop?

  The steps below apply to Windows 7:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Make sure that you back up your data.

  Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Step 2) click on the link below to provide newspapers:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 3: Run a virus scan:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  It will be useful.

• The red light blinks and I can't print.

  I reinstalled, activated and deactivated, changed the ink and still no luck.

  Thank you for the information.  From what you describe, looks like the printer's mistake out there, but don't not giving much information about what is at the origin of the problem.  I found this document on the flashing of the patterns of light for your printer that should help you to find the cause of the problem and fix it.  If the document can help you to work around the problem, you may need to get a new printer.

• Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

  Hi all

  Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

  Thank you

  Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

  I hope that you have a previous backup, you won't be able to recover your data

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• How to turn off the blue lights under the speakers on Satellite P100?

  Does anyone know how to turn off the blue lights that lie beneath the speakers on a Satellite P100? They are evil in my sight!

  Thank you, John.

  Hello

  You are a lucky man. This is a very new unit and I wish that I would also have one of the new Satellite models. But you know, the money is the key :(
  However, I don't think that it is possible to put out these fires.
  In my opinion, it is a part of the design of laptops. It seems very futuristically.