The red light blinks and I can't print.

Similar Questions

• The red light blinks and the battery is connected

  I have the adapter plugged in to charge my battery and it flashes red, then how to stop flashing?

  I would contact the customer to the manufacturer of your computer for this problem.

• BlackBerry Smartphones my BB Curve turns on; the red light blinks

  My bb 8330 curve will not turn on, charge or do anything other than flash the red light to me. I tried removing the battery and tried to reload, but nothing seems to help. Any ideas?

  Nevermind, I solved the problem by removing my memory card.

• Trinitron TV turns off. The red light blinks 7 times

  I have A FD Trinitron WEGA. It works perfectly for the past year 8 and a half. Recently, he died while we watch. The red on the front of the TV blinks 7 times. I wonder if a repair is required, and how much it will cost, thank you for your help.

  Hi joehui,

  Check whether in the TV, clock/Timer is set. If so, disable the timed operation parameters.

  If the TV is connected to a power strip or surge protector, remove the power strip or surge protector and plug it directly into the wall outlet. If the problem is resolved, the problem is with the power strip or surge protector and not the TV.

  Follow the steps below to perform a power reset:

  • Turn off the TV.
  • Unplug the power cord of the TV from the power outlet.
  • Let the TV remain without power for 60 seconds.
  • Plug the power cord into the power outlet.
  • Turn on the TV.

  If the problem is still not resolved after following all the steps of troubleshooting, service may be required. Locate the centers of the closest authorized repair the link below.

  https://eService.Sony.com

  The exact cost of the repair can be determined only after a physical examination of the TV. You can contact the service centers to know exactly the cost of repair.

  If my post answered your question, please mark it as an "accepted Solution".

• Ex720 turns on and off the red light blinks 8 times continuously

  LED blinks 8 times continuously and turns on or off tv

  Follow the steps below to troubleshoot the TV.

• Turned on, the red light flashes twice used to blackBerry Bold 9700 Smartphones

  Hi all

  Last night during the use of my bb bold 9700, it comes went away, came back and then my bbm (messenger) has been removed, so I tried the update of the OS which proved a failure, unplug my bb from my cell phone minutes later, it exploded and the red light blinking twice, charge all night and symptoms persist. can someone help me please.

  Thank you

  Remove the battery and leave it out for about 2mins. Insert the battery and see if works. If this does not work, you can try the update of the new OS but this time with the battery. When the process gets to "Loading Applications" insert the battery and let it go through to the end.

  I hope that you have a previous backup, you won't be able to recover your data

• HP Officjet Pro 8600: Power light blinking and can't turn on or off

  Printer has power light blink and wll not turn on or off

  [Moved from comments]

  Hi neuserivergirl,

  1. have you made changes on the computer before this problem?

  2. which version of the operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can disconnect the power cable from the plug, and then try to turn on or off.

  It seems to be a hardware problem, I suggest you contact the manufacturer of the printer for assistance on this issue.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

• Jet Dell 1130 laser printer, the red light keeps blinking

  I have a Dell 1130 laser printer. It prints well and all the time. Problem the red light continues to Flash. What should do?

  According to the manual, a red flashing! slight implementation:

  • A small error and the machine is waiting for the fault to be cleared. When the problem is corrected, the machine picks up.

  • Small amount of toner is left in the cartridge. The estimated life of toner cartridge is close. Prepare a new replacement cartridge. You can temporarily increase the print quality by redistributing the toner.

  If you have a new authentic toner cartridge, try to reset:

  With walking and the cartridge door open, press and hold the Cancel button until all lights flash in sequence. Release the button and close the door.

• BlackBerry 8900 smartphones will be no more power up and a red light blinks!

  I have a new 8900 and put in place all OK.  It now will not power and all I have is the red light flashes intermittently. Have tried removing the battery but no joy.

  Someone at - it ideas please?

  If your BlackBerry is still under tension turned off with a black screen, follow the instructions below. The only indication of life may be the flashing red indicator light in the upper corner. Nothing seems to wake and Desktop Manager does not recognize that a device is connected.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• R410 the red light flashes

  I can't find any description in the manual of the equipment to a red light blinks on the display on the front panel (there is no error message) and a red led flashing below the NETWORK card on the back of the server.  It is out of warranty, so I hope it's a minor problem.

  Try to update the system bios and clearing the logs and we'll see if the returned errors.

• trying to turn on my HP compaq d330 but red light flashes and a beep and nothing does not illuminate

  trying to turn on my HP compaq d330 but red light flashes and a beep and nothing comes up on help a beginner please

  You can try to remove and replace the memory and see if it works.

  If this does not work, delete all except one module of memory (if the PC has more than one) and see if the PC works normally with the chip memory. If it beeps, remove and replace it with the memory you removed and keep doing that until you find the defective memory chip.

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• I started the Narrator by mistake and I can't turn off

  I started the Narrator by mistake and I can't do power off. Does anyone know how to disable the easy access of programs when they have been light up?

  Try this: go to control panel > accessibility > Ease of Access Center > explore all settings > use the computer without a display > uncheck the box by tour Narrator > click Save...

  See you soon.

  Mick Murphy - Microsoft partner

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• BlackBerry Smartphones Double flashing red light after failed update - can not turn on!

  Hello! When I installed my BB Desktop Manager and connect for the first time in my Bold 9700, he asked if I'd like to update various features on my phone, to which I agreed. The update froze - I do not altogether during that stage, but I remember that it is in the stages end as well as the scene in which he froze began with the JVM. After waiting an hour or two, I have disconnected my Blackberry, not knowing what to do. The screen stays black and the red light starts flashing.

  I looked up the fixes for the problem and they seemed a JL_Cmdr used to do a full wipe - simple - but I am on Windows 7 and it is not compatible. I get a brief command prompt screen for half a second before it closed.

  The second difficulty involved using the command prompt to get the charger in the AppLoader file - but I ran into another problem when trying to open Loader.exe, I have one "the Application Loader requires Blackberry device manager to install.

  Then raising THAT fix, I downloaded a new OS and redownloaded the Desktop Manager, but I get the same error.

  It's really depressing. Any advice or assistance would be greatly appreciated.

  Hi and welcome to the Forums!

  JL_CMDR works fine in Win7. Don't launch from the file Explorer. Instead, open a command box (start > run > CMD). Then browse (just like in the BACK) where it is and run it from the command line.