BlackBerry Smartphones transmit and receive went faulty but phone calls will be text. Clicking on the loudspeaker sound

Similar Questions

• BlackBerry smartphones can not send messages or make phone calls

  My BB torch worked fine earlier, but there is an hour, it just stopped.  He has connections and bars, until in the Connections window bit. I tried it turn on and off as well as to take out the battery after it's off to reset.  I tried to remove all of my old conversations in the phone as well. I can still connect to the internet on this topic very well.

  Hello and welcome to the community!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come...) Please wait for this before moving on to the next step):

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your provider of wireless services for formal support.

  Good luck!

• BlackBerry Smartphones, sending and receiving text messages moroccoin

  Hello

  I recently had to buy a new smartphone, and I, as a die hard fan of BlackBerry, chosen 9560 "BOLD". It was a third unlocked phone that works with my cells T-Mobile provider. However, I can not send or receive text messages with images. I contacted T-Mobile and they sent me instructions on how to change my APN, but it did not help. Maybe someone knows how to turn my phone to send pictures.

  Thank you.

  Hello and welcome to the community!

  MMS (what is "picture messaging") depends on your device having a good plan your provider BIS. BIS requires the reception on your device, Service books your provider. The ability to offer books to your device depends on your device is compatible with your network of carriers.

  So, with all this, I recommend that you re - contact TMO for you sure you meet all of these criteria... only they can tell you if your specific device model is even compatible with their network of data and more if they have configured a package of sufficient data to enable the MMS for you.

  Good luck!

• I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  How do I get this project on a B

  I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  What should I do to get this project on a BluRay disc?

  In response to both Richard & Stan.  I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.»  Or something very similar to this, but I think it was exactly that.  It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation.  So it was a shock and cost me money and the failure to meet a deadline.  What I did: on-screen 'Build '.

  Format: Blu - ray,

  Output: Blu - ray Image,

  Source: Currrent project,

  Destination: I Browse... d a location appropriate.  He managed a Blu - ray image.

  Using reminder once again, step 2 - on-screen 'Build '.

  Format: Blu - ray,

  Released: Blu - ray Disc,

  Source: Disk Image,

  Destination: my disc drive that holds a blank Blu - ray disc.  He managed a Blu - ray disc.

  Then I found a job step 2 autour for the problem.  My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised.  I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised.  I submit my first bug report.  My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.

  I'd love to know the thoughts of others on this.

• How do you transmit and receive using a single attena with USRP

  Hello world

  I want to do a reader RFID with USRP. I want to send a signal to activate at the first and then RFID tag receive and decode the signal reflected by the tag. As I know, there are two interface RF on the USRP daughter card, I can send and receive signals using two attenas. But how can I pass the activation signal and receive the signal of the Reflection using an attena?

  Thanks in advance

  Hi 0711,

  If you use the TX/RX port, you should be able to transmit and receive using the same antenna.  But it requires more setup code.  You should have at least 2 loops in your code - one running a RX session and another execution of a session of TX.  You can use the 'End of data?' option on the niUSRP Data.vi of Tx write as a way to send your data without having to start and stop the session every time.  In order to obtain the flow of data between the session RX and TX session, I used queues.

  I worked to put together an example that illustrates the basic architecture that is required to run an application like this.  This example is not polished or finished, but I've seen some requests for how to do this, then I'll post to give you are the point of departure.  Please note that this code still has problems that need to be debugged and addressed.  It is simply intended to show how to use the end of the data? option to enable transmission shrapnel while receiving data on the same antenna.  If you set the TX1 and RX2 antennas use a loopback configuration, you can also use this code with a USRP.  Hope this helps and ask questions please.

• BlackBerry smartphone Email not receive or reconcile, cannot acesss email account either management program!

  Hi everyone, I really need help with this, its driving me crazy! I have a blackberry bold 9930 sprint, 7.1 Bundle 1737 (v7.1.0.580 platform 5.10.429), free space is listed at 154523817 bytes.

  I have my email through godaddy, which is secureserver.net. This is Courier IMAP. From Friday or Saturday, my emails do not grow automatically. Sometimes it should be hours and hours before all my emails will pour out at once. Battery pull worked, but now the battery pull does nothing.

  I tried to send service books today, but now I can't even access the e-mail account management option to send service directories. When I enter the application, it says 'check updates' but never recovers. I left about 10 minutes today and will continue to say: "check updates".

  Anyone else having any questions or know what in the world happens suddenly? Any help is greatly appreciated!

  Hello and welcome to the community!

  I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  (2) remove and return Service directories

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  (3) restart to take batt

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  song510 wrote:

  I tried to send service books today, but now I can't even access the e-mail account management option to send service directories. When I enter the application, it says 'check updates' but never recovers. I left about 10 minutes today and will continue to say: "check updates".

  What's the accurate and complete error message? Because I can't find anything to use these 3 words of jost... Maybe it's that the configuration of email application has a problem... this KB might help:

  • KB26055 Unable to access the configuration of e-mail on a BlackBerry smartphone Application after a forced update

  Good luck!

• Messenger of blackBerry Smartphones BB and fees for use on a trip across the world

  I have a BB Curve and will take a trip to Europe (I am the United States).  I have TMobile, and I continue to receive responses from TMobile about the question to know if I charged for the use of BB Messenger while in Europe.  Are there fees for using BB Messenger or is it a free service offered to all BB phones regardless of the telephone operator?

  Thank you!

  This issue has been several responses depending on how YOU will use the data.

  BlackBerry Messenger uses your unlimited dataplan, while you are in the United States. While you're in your home country, you can use BBM to send and receive messages from all worldwide - free - as long as you have the unlimited data plan.

  If you travel abroad, you will need an international data plan and the BBMessenger would then become a part of this plan, IF you get this plan. Otherwise, (a) you not have data in Europe, or (b) you will be charged for the use of international data without an international data plan, and which will cost a lot of money.

  Thus, the follow-up question is... will you have a data Plan International to TMobile on a trip, or what are you plans?

• Today I received a phone call from 'Human IT Solutions'. The operator said that I had reported an error and asked me to log in

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  ADF, I received today a similar appeal.  When I questioned his information on the company, he was very defensive and said "I have no cold calling, I'm in East London" I asked him to give me the name of the software MS causing errors, during which he compiled a long list of file extensions and avoided the question.  When I asked her name and phone number so I can get my husband to call him back, he began to read a number on phone, but the figures '0-1', the line was cut off.

  I'm sure you made the right choice in putting an end to the conversation of what I lived today.  I have no idea how you would report to Microsoft, but wanted a response to you here to support your actions!

• Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

  Why what I receive update alerts, but, when I check, I said I use the latest version of FF?

  Try to repair disk permissions:

  • http://thexlab.com/FAQs/repairprocess.html

• Windows XP is very slow and auto update works but when I try to run internet explore the system times out. »

  Original title: Windows XP runs very slow

  Windows XP is very slow and auto update works, but when I try to run internet explore the system times out.

  Hi Bill,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the error message that is accurate or complete?
  2. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the links below and check the issue:

  Maintenance tasks that improve performance:
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Slow PC? Optimize your computer for optimal performance:
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=R7qdKIMaJyT

  Warning of Chkdsk.
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Internet Explorer is slow? 5 things to try:
  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• CS6 bought and downloaded for Windows, but now have a Mac. I have the disk to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account. It is not listed under my orders on my account

  CS6 bought and downloaded for Windows, but now have a Mac. I have the disc to download on Mac, but do not have a CD drive in my computer. How to download through my Adobe CS6 on my Mac account? It is not listed under my orders to my account, so I can't do it this way.

  Hello

  You can access the link as follows and download the installer for CS6 products and activate the product using the license key of series.

  Download Creative Suite 6 applications

  Thank you.

• I have installed PS 4.0 long ago and improved through v5 and v6.0.  When I migrated my XP PC to Win8 I couldn't migrate PS 6.0. Without program PS on my PC, I have to reintstall V4.0 but my PC will not read is not the CD of the V4.  How can I reinstall th

  I have installed PS 4.0 long ago and improved through v5 and v6.0.  When I migrated my XP PC to Win8 I couldn't migrate PS 6.0. Without program PS on my PC, I have to reintstall V4.0 but my PC will not read is not the CD of the V4.  How can I reinstall the product and bring it back to V 6.0? Thanks in advance.

  Each release of Photoshop, I installed has a serial number. I can see all but one of them in my products in my account on Adobe.com Adobe.

  To install an update with any previous version of Photoshop currently installed, you must update the serial number and a serial number of one of your earlier versions of Photoshop that qualifies for the upgrade. The prior munber could also be an upgrade of the prerequisites.

  Photoshop 3 was my first version of Photoshop as the serial number and the serial number of upgrade Photoshop 5 has been lost over the years. I jumped 4 Photoshop, Photoshop 6 and CS4 then the serial number for my products are all updated serial numbers.

  

• Hi, I bought the CC of Photoshop and Lightroom pack today, but when I press 'go button' to start, the site of laetitia goes gray... and I can't go any further... What can I do?

  Hi, I bought the CC of Photoshop and Lightroom pack today, but when I press 'go button' to start the adobe site goes gray... and I can't go any further... What can I do?

  Install the cc desktop application from there, Download Adobe Creative Cloud apps | CC free trial Adobe

  Use the desktop application to install ps and lr.

  Once your payment is processed, you should be able to see your ps and lr test convert to the non-epreuve versions.

• I have a CC ID and purchased CC Complete, but see no title as such. Separating the files I have to download to complete the package - not to mention inDesign, Photoshop and Illustrator? Thank you.

  I have a CC ID and purchased CC Complete, but see no title as such. Separating the files I have to download to complete the package - not to mention inDesign, Photoshop and Illustrator? These last two are always in mode 'test '. They automatically become part of my purchase at the end of the trial? Thank you.

  You should go here and download the desktop cc app, if you don't already, Adobe: creative, marketing, and document management solutions

  If you already have the cc desktop application, disconnect you, then again by using the same adobe id used to pay your subscription, http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  your paid for apps then should be listed as up-to-date or available to install.

• BlackBerry Smartphones can how put out us an emergency call when the phone is locked

  We had new mature 2 days we were... my husband has his in his pocket while he was playing pool.  The door opened and 2 cops came and asked who had that phone number. It turns out that the phone can dial 911 when if locked sound moved around.  The cops were very kind to this topic and said they get about 4 calls a week like that of blackberries.  Someone later told us there is a way to disable it. I looked through the section "help" and can not find a thing... can someone tell me how to proceed? Thank you!!

  You can place the devices in Standby Mode After locking. This will prevent the accidental keys in your pocket.