Blackbery of blackBerry 8300 Smartphones does not start... have you tried everthing.

Similar Questions

• BlackBerry 8520 smartphones does not start

  Hello everyone I have a bb curve

  and it whont start and I did this

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely. this work of a force...

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track. ) but this one did so but my phone disconnect automatic coz it stats to start up again but not all the way Please help me I don't know what to do

  Thank you very much

  Hello and welcome to the community!

  Please try this sequence... Note that, throughout the whole 4h15m process, your BB should stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  It may be that you need to use something different with the procedure that you follow... see these:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State

  Good luck and let us know!

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• My 9790 bold blackBerry smartphones does not start

  suddenly... my 9790 bold will switch off... then when I tried to turn it on again, it does not start... I tried to charge the battery and some attempts to turn it on by pressing the power button, it just would not start... then I tried to connect it to my blackberry usinf desktop Pc, I would not... detect someone could help me? any advice on how I can get it to turn on?

  Have you tried removing the battery and insert again?

• My blackberry blackBerry smartphones does not start!

  Hello!

  My blackberry does not start. I charged the battery for 2 h 30, removed the battery, I tried everything I could, but nothing, it does not work. Do you know how I can start the blackberry?

  Thank you!

  Yes, get a wall charger and plug it in. USB charge only the phone if there is always some charge in the battery. USB, will show a red light but won't load at all because the PC must identify the phone before charging starts.

• After updating Windows twitter blackBerry smartphones does not start

  I downloaded the version 2.0.0.11, and the application does not start.
  Could you help me? Thank you
  Rodrigo

  Do a simple reboot on the BlackBerry this way:

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, please try again on Twitter.

  Even if you already have, please try again.

• BlackBerry 8250 new smartphones does not start with the connected SIM card

  I'm having a problem with my new Blackberry of Virgin Media (mobile).  I just got it and when I have a connected SIM card I only get the loading screen timer and the blackberry does not start.  If I have no connected SIM card the device starts in the operating system, but was told that there is just no SIM connected (obviously).  Once I put the SIM card in again once it is stuck on the loading screen.  As you probably already figured out that I did many resets hard with the battery pull and it has not solved the problem.  A consultant because it would be greatly appreciated because the only advise I got support was remove the boot of sim and put it back and start again duh!

  Carrier - Virgin Media / Vodafone
  Model - 8520
  Version of the OS - 4.6.1
  Free space - 130679088 bytes

  BT device - I have the details as HDW - 22736-002 Rev 1 Ver 2 4509 (is that correct?)

  Apps & free space - nothing installed new device installation is not complete.
  Blackberry 4.6.1 Basic application
  Basque 4.6.1
  Galician 4.6.1
  softwqare system BlackBerry 4.6.1
  1.0.1.20 Application Center
  Attachment Service 4.6.1
  4.6.1 cards
  Messenger 4.6.0
  BrickBreaker 4.6.1
  browser 4.6.1
  documents to go 1.003.018
  configuration of e-mail application 4.6.1
  help 4.6.1
  Klondike 1.4.8
  4.6.1 Memopad
  password keeper 4.6.1
  Phone 4.6.1
  Sudoku 1.0.11
  4.6.1 tasks
  King of hold'em Texas 2.3.0
  Word Mole 4.6.1

  1 is the news provider's SIM card?

  Old to another device?

  2. do not place you a memory card in the camera?

  New media card?

  or from another device? What device?

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Help my pc does not start after you have uninstalled the video driver

  Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

  RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

  http://www.computerhope.com/beep.htm

  If this post answers your question, click mark as answer .

• Problem with the HP Media Center M7670. UK - a - does not start after you install an update to Apple Quicktime

  I just installed the latest update to Apple Quicktime (once an update message appears on the screen). When asked if I wanted to re - start the PC now, I clicked on Yes.

  Now the computer does not start. The power led lights up, then the hard drive light blinks for a while, then nothing happens and the PC begins to beep. The beeps are repeated, with 2 short beeps and one long beep. What do the beeps mean?

  Then a CMOS clear would be the next logical step in troubleshooting.

  Here is a link to your motherboard page.

  Clearing CMOS information at the bottom of the document.

  It is usually the last step before giving up on a motherboard.

  The problem you are experiencing is hardware motherboard related firmware.

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• Mackbook does not start even after trying disk external bootable

  Hello

  I have been using macbook for four years until I started face to boot problems with the laptop. The details are given below-

  MacBook Pro 13 inch (middle of model year 2012)

  Latest OS installed - El Capitan (worked very well without any problem since release)

  Upgrade RAM - 16 GB

  Given that I have used to keep macbook in mode 'sleep' while I don't use it, sometimes, the battery runs out and the mac stops. But the last time when he stopped this way was a week back, and since then he has failed to initialize.

  Tried troubleshooting steps-

  1. Try and boot into safe mode - gets stuck during a progress bar
  2. CMD + R in recovery mode - I am able to access the recovery options. Disk utility doesn't show any problem with the default player. Fails to start when the computer reboots
  3. Reset PRAM-start fails.
  4. External drive bootable - an external drive to use for the resettlement of the fresh OS x. Installation complete installation. Data and other settings copied successfully to the new disk. Is stuck on a blank gray screen.
  5. Reinstall a new copy of OS X. Installation complete. Takes awhile to achieve 100% on the progress bar, but then gets stuck there constantly.

  If the default drive would have been corrupted macbook must be able to start with disk utility or external drive would have shown some bad sectors. Your help would be very appreciated

  Thank you

  Buxant

  Hi Abjeet1:

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

  Kim

• BB of Smartphones blackBerry 8520 curve (does not start)

  Hi, I have a prob my girls curve 8520 just died Monday afternoon. She says he died as "the battery was flat," she says. Now, it does not come on, he wants, but he isn't. We have replaced the batteries, battery on a laptop and one wall loaded - the battery has been out for 12 hrs - sim card removed and replaced - I think is broken now well if I put the battery in, the red LED lights up, tha screen starts, then dies, then the LED lights, screen insiders, dies, LED etc. If the phone and then gets to the left (if all goes well to start eventually) continues the sequence mentioned above. But, the phone gets hot, as if to overheat. I have the idea that this overheating is like a short circuit on a car battery. At the moment, I decided to ask for help before you go out and buy a new phone. Is there a solution to this? Thank you

  OK, don't forget to read and try the instructions I posted above for a device that does not connect.

  http://www.BlackBerry.com/BTSC/KB10144

• Torch 9800 blackBerry Smartphones does not start, please help

  My father was a game in his torch, then he suddenly crash like button works / stop does not work he removed the battery and reinsert it, after that bb keeps on restart loop I tried starting it works then I ask him to remove the application that does crash after reboot I can't transcribe this safe mode and the phone always reboot loop After downloading Director of office of BB I tried to connect the blackberry it recognizes torch 9800, but there is nothing I can do about it. After searching a bit I found "common files" apploader folder might help so I took the opportunity to remove the other app, still does not work in the end, I use apploader /resettofactory to reset the device, it shows a white screen with a bar saying wiping files. After reaching 100% and restart my phone still in restart loop. What should I do now?

  Thanks before

  Hello and welcome to the community!

  You really need get in Mode safe mode again so that you can reload your operating system. You would have gotten lucky that first time with the right timing on the keystrokes... Keep train... I remember it taking a lot try until I'm a model to go properly in Mode without failure.

  Otherwise, these articles may be useful:

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck!