Mackbook does not start even after trying disk external bootable

Similar Questions

• WT8-B-102 does not start even after charging

  I recently bought a Toshiba WT8-B-102, and I have some problems with it.

  First of all, I couldn't install the update to the BIOS for a reason, but this isn't a huge problem for the work of the Tablet very well

  but now I can't start it over. yesterday, I had the same problem, the tab left alone for a while (on the charger) and after that there no start/start. half an hour later, I tried again (after taking the charger) and then he started, but today it won't start at all. Even if I load for a few hours, then try again, try to start charging, etc. It's not good right?

  I don't see that some led light or any other sign when I attach it to the charger. Any help or ideas guys?

  Thank you

  Probably the battery is totally discharged.
  In this case, you need to charge the battery by connecting the power adapter for 30 minutes before turning the power on

  Yet WT8 and Encore WT10 won't turn on after some time of no use
  http://APS2.toshiba-tro.de/KB0/TSB4903N80001R01.htm

  If this will not help, the device must be checked for possible hardware problems.

• Windows search does not start even after the execution of my fixit

  I am running Windows XP, windows search is in my startup folder.  The bar indicates "expects to receive indexing status" / when I try and open start-all programs-windows search I always get error popup Windows Search is not running. To start it, click the start menu... "what I did of course everything.  I tried the Mr Fixit, but she comes back with "not fixed".  Help - please!

  Try going into the service by clicking Start---> Run, type services.msc, click ok. Scroll down to see if windows search is enabled.   You can also check in Control Panel, add/remove programs to see if you have research above windows 4.0 installed.

• Firefox does not start, even after reinstalling. Help!

  I click on the icon and nothing. Tried uninstalling and reinstalling, still nothing. Help, I want my back firefox!

  I'm sorry to hear about your problems. To deal with the problem, please visit this link.

  • https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Machines Windows does not start with 2 virtual disks different on 2 different

  Hello

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black windows loading screen, then restart and then restart and try to start in safe mode, it still does not start.  the machine rendering it useless.

  The single element only on these virtual machines is as follows.

  Windows machines have 2 different virtual disks 1 on a lun, VMFS (vmfs version 3.21 c:) and a RDM VMFS (d :))

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Would this questions we see above?

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  Hello.

  With the help of esx.3.5.0 update 3

  I have a problem where if I have a new VM to win 7 or Win 2008 r2 with or without vmtools.

  If I reboot it up to 10 times without having to install anything, whether he'll join the black screen windows loading and then restart and then restart and try to start to > safe mode, it will not even start.  the machine rendering it useless.

  Windows 7 and 2008 R2 are not supported in this version.  5 update brings support for these two operating systems.  Go to U5, maybe it's the solution.

  3 questions

  Is it a problem to have 2 different discs with 2 different stores file types?

  Laughing out loud

  Would this questions we see above?

  It is unlikely.

  Also, I thought that you might not? VMotion/clone? a virtual machine if she drives in 2 different places?

  I tested and I can vmotion live VM with records stored on 2 different LUN.

  VMotion requires shared storage.  Local storage would be a problem if you tried to change hosts.

  also would it be a problem if 1 store was running 3.2.1 vmfs and other store runs 3.31 and a v on each disc is used for the VM 1?

  Lol this is explained in KB 1005325.

  Good luck!

• Windows vista does not start try the recovery disk and nothing

  I have a pavilion hp a1712n with windows vista starts not tried the disk recovery and nothing, it sounds like it is stuck in mode 'sleep'. I can hear it loading but it dosnt take the cd/dvd drive, I tried unpluging the drive to see if it will continue to load, but it didn't. I can not use the key to go into bios Board or something, all ideas given lose don't are not important computer been gave me this problem, so if there is something that I can do but personal files will be lost is very well thank you all

  Hi scoobydoochick,

  1. what recovery disc do you have?

  2. you receive an error message?

  3. you see the computer manufacturer's logo while you start the computer?

  Looks like that there are some hardware failure on the computer that is preventing the computer from starting.

  Will need you a Windows vista installation disc as recovery are different from the install disc and restore disks are created by the computer manufacturer, we are not aware of its functions.

  Once you get the Windows vista installation disc, that you try startup repair by using the link below or take the local computer tech shop and the material tested on the computer.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• Services do not start even after changing to start automatically.

  AdminTools services

  ControlPanel-> AdminTools-> Services-> server, when it set up Auto or manual, it does not start after reboot. What are the settings I need to change? All my files and printer sharing are turned off (unles I start it manually). Any help, please?

  Hi RichardSkrzat,

  -Did you change on your computer before this problem?

  Follow the steps in the article to solve the problem:

  Troubleshooting File and Printer Sharing in Microsoft Windows XP

• Windows XP does not start even in safe mode. He just continues to repeat the start-up process unsucessfully.

  I had to force my computer last night.  Now the computer is turned on, I see Windows XP, then the computer passes the screen advising me the computer was closed and asks me if I want to start in safe, regular or the last usable parameter is known.  Unfortunately, they are all take back me to the same screen after a minute and the whole process starts again and again and again.  It does not start in same mode using F8 or F12.  Any advice?  Computer is an older laptop, but it worked great the day before.  I don't have add new programs.  I get the Toshiba screen and XP logo, but nothing beyond.

  Hello

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

• PC does not start upward after being low consumption mode. seeing any food is yellow and nothing is on the monitor

  After being in mode low power for a few hours, the pc does not start upward.

  the led on is yellow instead of green and the monitor displays no signal. It is a dell 4700

  Windows xp home

  Obviously, it's a hardware problem. Unplug the computer from the power outlet. Press and hold the power button for 5 seconds. Let the computer unplugged for a few minutes then re-connect-the and try to turn it on.

• HP Pavilion: Disk drive does not work even after I have installed and uninstalled

  Hello

  The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.

  This error appears when I look at the properties of disk drives:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I don't know what else to do.

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Disk Cleanup option, system does not quickly even after disk clean

  (1) should I delete the archives window EEror report on my system using the cleaning disc, which is safely remove by using the cleaning disc to improve the performance of the system.

  (2) system does not run fast even after Disk Cleanup, what should I do to make it faster?

  Hello

  1. have there been recent changes to the computer before the show?

  Method 1:

  If you want to reduce the number of unnecessary files on your hard disk to free up disk space and then go ahead and delete it, it would help your computer run faster.

  Disk Cleanup removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Delete files using disk cleanup: http://windows.microsoft.com/en-US/windows-vista/Delete-files-using-Disk-Cleanup

  Method 2:

  A. ways to improve the performance of your computer: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

  (B) How to make a computer faster: 6 ways to speed up your PC.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Hope this information is useful.