Blades against the traditional Rack servers

Similar Questions

• Max UCS C-Series rack servers

  Is there a document that indicates the maximum number of rack servers supported in UCS C-series? I did some research and did not happen to a hard number as there are blades.

  Thomas

  Currently with 1.4, the supported maximum is 19 (with a 6120) / 39 (with a 6140).

  If you look at the attached picture, it shows the wiring necessary for the integration of the series c with UCSM.

  Management (CIMC) passes through a 2248 while data cards (10 Gig ports) go directly into each of the 6100's.

  Assuming no B series and 1 connection to the each FI 2248, you end up with ports 19 or 39 for a 6120 and 6140 data respectively as only fixed ports on YEW can be Server deal with. It is here that the limitation origin currently.

  Thank you

  -Matt

• purchase through Apple against the provider?

  Are there advantages of purchasing an iPhone 7 by Apple against the purchase through my provider (Verizon)?

  I used to buy AT & T or Verizon Online because they have stores that can simplify making a return if there is a problem. No local Apple Store where I live.

• Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T.

  Thunderbird does not all files except "inbox." and against the info 'aid', there is NO 'account settings' under 'Tools' & I have the latest version of T. I just need to download the SENT MESSAGES, Inbox not only.

  Re: Where is 'account settings '.
  If you do not see 'Tools', then you do not have your active 'Menu Bar'.
  See picture below on the activation of all the toolbars make life easier.

  Different methods of location of the 'account settings ':
  Via the toolbar "Menu Bar":

  • Tools > accounts settings

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".

  Via "Menu Icon.

  • Menu icon > Options > account settings

  Re: I need to download sent Messages Inbox not only.
  E-mail accounts IMAP see a remote view of the files on the server.
  You subscribe to view these folders in Thunderbird.
  You synchronize directories subscribed for a copy in Thunderbird.
  What you do in a folder for example imap: delete, will occur on the server, so viewing via webmail or Thunderbird folders appear identical.

  However, in your case, it seems that you have created a POP e-mail account.
  E-mail POP accounts can only connect to Inbox server and download server Inbox for the Thunderbird Inbox pop e-mail account.
  It's not a quirk of Thunderbird; This is how all Pop mail represents the work.

  There is a work around to get "sent" in the folder mail sent from server in Thunderbird. You just do it once, because when you send it through Thunderbird, it will put the e-mails in the folder sent TB pop mail account and not on the server.

  Thunderbird creates a "Sent" folder when first send you an email.
  So, if you have not yet sent an email, please send one, even if only to yourself.

  Then, move all inbox emails in the appropriate folders.
  You can create new folders to organize them.

  How to create a new folder:

  • Right-click on the name of the e-mail account, and then select "new folder."
  • Give an appropriate file name and click "create a folder".

  When the Inbox is empty:

  • Logon to the Web e-mail account by using a browser.
  • Move all emails "Sent" in the "Inbox".

  In thunderbird:

  • Click on 'Get the message'

  all the "Sent" emails must get downloaded from the server Inbox anto your Inbox in Thunderbird.

  • Then move all your emails in the 'Sent' Thunderbird folder.

  You should now have all these emails downloaded from the server and display in Thunderbird.

• Many users want the traditional menu at the top of the screen - file edit view tools. If we cannot have that we could thus have Chrome as our browser?

  Why can't new versions of Firefox come at least with the option for the traditional File-View-History-Bookmarks-Tools-Help! Many users like this feature and if we don't have it we might as well revert to Chrome as a browser. Previous to return to the menu patches do not work on the end versions so give us a permanent solution please

  See also:

  • https://support.Mozilla.org/KB/what-happened-to-the-file-edit-and-view-menus

• Number of unread messages not displayed against the message icon

  Product name: Iphone 5

  Storage capacity: 16 GB

  iOS 9.3.1

  Problem: Number of unread messages not displayed against the message icon. Can someone help me please.

  Already done troubleshooting: "The application of the badge icon" is running in the center of Notifications. Also restarted my phone several times

  Disconnect from the iMessage by settings - Messages - iMessage - OFF

  Disconnect from the iCloud

  Sign up for iPhone

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Sign back into it

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• I upgraded to 5.0. The image is now my full screen. To see that the tabs I have open, I have to push my cursor up against the top edge of the screen, where it will appear in the display.

  In the improved version, the image of any page Web I'm on fills the entire screen. There is no info either the top of the screen or at the bottom of the screen, just the image of this Web page. If I push the cursor upward against the top of the image, then two nav bars pop open, one with a list of open tabs or windows and the other with a place to type the URL from another site, as well as on the right of the icons for Greasemonkey, etc.. Pushing against the background of the image icon does not produce anything.

  F11 activates / deactivates the full-screen mode - turn off.

• Tecra A8 PTA83E - the traditional update of the Bios is not available?

  Hello
  does anyone know if the bios update 3.40 (published 24/05/07) is available as a traditional update rather than an exe only windows?
  see you soon
  Damian

  Hello

  It seems that the version of BIOS WIN is available on the page!
  But generally there is no difference between the traditional BIOS or BIOS Win.

  The only difference is the update procedure. All that s.

  But look, man. If you have any problems with your laptop, you shouldn't t update the BIOS.

  Best regards
  Good bye

• Save the input of the meter against the clock data

  Hello, I would like to know about recording by using an entry in the file of the measure.
  When I record a given as analog inputs, to save the file with display analog data against the clock.
  But when I tried to applied the encoder, which uses counter entries, in the .txt file are not displayed
  the result in the form of analog input. If anyone can give me a guide on what writing to measument setting
  file to measure the revolution per minute is against time, thank you

  
  

• Measure the movement against the frequency

  My test is measurement and tracing motion valve engine RPM. I need the valve position sample (analog signal) all of the pulses from a rotary encoder and also enjoy RPM. Then later I have to extract unique plots, each revolution of the position data. Each parcel must be referenced against the RPM about during which it was sampled. This will take place at the 66kHz about 8 seconds while it will generate a long file.

  I suggest you begin the Z (1 per rev) pulse signal sampling and 1 post analog SOUL each dry vegetable (720 / rev). Store this table. At the same time I want to run a task to capture the frequency once every revolution (pulse Z) by measuring a pulse. Store these vals to a separate table.

  After measurement is done I can record the position great soul array in a file of measures and record the frequency data in a separate, much smaller file (let's call it an index file).

  In this way, for the analysis, I can load the index table and count the length of it in order to determine the length (in points of data) of the large table soul. This could allow me questioning the guard index for a selected rpm and select the correct positional score 720 for conspiracy against angle encoder (tracing movement is against increments of 1/2 deg as x.)

  This plan has any merit? I'm new to this type of measure, and if someone knows of similar procedures I hope you hear and taken into account. Is there maybe a better way?

  This seems reasonable. Look at the threshold of the 1 d Array function.  You can use it to search the Board index to a certain speed.  Round off the result to the nearest smaller integer. The index in the positional table will be 720 * this integer (- 1).  If your speed can vary from top to bottom, you may use the start index or reverse the table to find the location you want.

  Lynn

• The cutting of a legend against the axes in tiara 2011/2012

  Hello

  until DIAdem 2010, it was possible to cut a legend in a report against the axes, but not against the chart.
  To do this, I had to create the layout in the DIAdem 8.1 set the clipping and then convert TDR LPD.
  As you can see below, the legend of tiara cache the grid axes and leaves the visible graph.

  

  The Tower using DIAdem 8.1 to create the page layout is no longer works in tiara 2011/2012

  

  How can I display a legend in DIAdem 2011/2012 which mask the axes and leaves the visible graph?

  Thank you

  GEMÜ

  You are right, 'Notes' of DIAdem 2011 you will find the following information:

  DIAdem 2011 compatibility and DIAdem 2010

  In the REPORT of DIAdem clipping settings "Only axes to hide" and "Hide axes and curves" is not available, even if you load a former route of the HPA. Instead, you can specify a background color for each object in the report. In the settings of object, select white as the background color if you want to display the report on the system of axis objects.

  The old function was not official supported since DIAdem spend the LPT TDR after 8.1. So I'm sorry that I can't give you a more satisfactory solution.

  Winfried

• How to trace the signal acquired against the clock all the time fixed by using Graph XY?

  Hello

  My goal is to trace the signal acquired against the clock all the fixed time dynamically. In General, it is like trace the waveform of the signal against the clock in a graph, but don't keep the recent 10 min waveform. My current approach is to get the timestamp by a VI and the express VI to use XY graph to make the plot. The result keep all data in the history which is not what I want. My question is that how to achieve my goal?

  Thank you very much

  Hao

  One way to show the last ten minutes of data is to use a graphic instead of a graph. Set the size of the history of the ranking for the number of samples you acquire in ten minutes.

  If you want to use the graph XY, you will need to manipulate the data yourself. If you don't want data from the last ten minutes and you want to throw all the old data, set up a circular buffer sized to hold the ten minutes of data. Once the buffer is full (after the initial ten minute break) adding a data point removes the oldest point. Make the buffer of a 2D with X data table in a line and the data Y in the next line. A queue with loss can be used in recent versions of LV to implement a circular buffer. In older versions, a driving force would be a good choice.

  Lynn

• Difficult to see the details for the traditional DAQ functions

  I'm migrating a Tradtional DAQ to DAQmx applications and manage to LV 8.6 to see 'details' for traditional data acquisition functions.  I looked to the traditional manual online user DAQ & a few other pubs and impossible to find a good explanation, parameters of entry and exit to functions.  Can someone help me?

  Thank you... PacMan

  In talking with Kent Lau, an applications engineer at NOR, told me I was missing the file nidaq.chm for a reason any.  Even after trying it from reinstalling drivers traditional DAQ of Q4, 2008 software distribution, it is still missing.  So, I installed an older version of the driver on a computer that has never had LabVIEW, then copied the file nidaq.chm in the folder 8.6\Help of LabVIEW & was able to then see the traditional DAQ work details.  Thanks Kent!

• Is there something to do with the Xbox live servers?

  OT: live.

  I played a game on my Xbox with a few friends for a bit now without any problems and all of a sudden everybody gets expelled from the party and now it says I have no friends online. I can still play my game, but I can't connect with a friend. Is there something to do with the Xbox live servers or is it my Xbox one?

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.