Blu - Ray content to adapt to the available space

Similar Questions

• Multi-writer stops and Blu - ray player and stutters on the new desktop.

  New HP ENVY H8 - 1420t CTO desktop PC.  Upgrade to drive optics multi-writer blu - ray.  While playback of blu - ray movies, drive spin for a few minutes then stops, stutters and makes a mechanical sound for minute, and then continue to play.  Very annoying.  Desktop is Intel i7 quad cpu 3.5 ghz and comes with the PowerDVD blu - ray software.  HP exchanged the drive.  No help.  Software mfg Cyberlink tells me that I should update the firmware.  BUT, I can't determine what is the model of the optical drive, who made it and therefore, how to get the firmware updates!  NOTE: Cyberlink also told me it is perhaps a matter of 'performance' - how is this possible with all of the provided equipment?  The graphics card is a Nvidia GeForce GT 630.  Help!

  I had a similar problem on my HP ENVY dv6t laptop and discovered that it was caused by the BlueSoleil BlueTooth software WMI calls interrupt playback. Where there is a similar problem, take a look at my blog and see if it helps you:

  http://www.madavlen.NET/the-case-of-the-stuttering-laptop-Blu-ray-player

• Blu Ray player can not read the DVD. It can read CDs and Blu Ray discs, but not DVD.

  Recently, I lost my hard drive.  Dell sent me a new disk with the drivers that came with the computer.

  I just noticed that my Blu Ray player is no longer playing DVDs.  I don't know if the hard drive crash has nothing to do with it, or if it's a coincidence.

  Windows says I have the latest driver.

  The computer is a Dell XPS 8300.   Is the Blu Ray player: bd - re bh30n hl-dt-st.

  The player has not served almost at all.   I read that there are the eyes for the Blu Ray vs DVD, then maybe the DVD part has failed.

  I'm always suspect that miss me a piece of software or a changed value.

  Any ideas?

  For all of you, the poor souls who shared my problem on the internet, I got beyond that.   Even though all said I had the latest driver, I found someone who said that they had downloaded a newer driver form the LG site and it fixed the problem.   Well, BH30N wasn't a model # on the LG site, but I found here: http://www.firmwarehq.com/download_1703-file_BH30N-A103.zip.html Norton said it was OK, I clicked on the EXE file, he said that he had me upgrade from A101 to A103 and suggested that I reload.   Once I did, my Blu Ray player will read the DVD fine.

• Composition of Blu - ray does not play on the 5 year old player

  CS6 and windows 7 Home Edition.

  Still used to compose a video simple blu - ray. Menu with three buttons and three sequences. Each button starts a three sequence and the end for each sequence action is to return to the main menu.

  Works fine in the preview, the panasonic TV and cyberlink 10 blu - ray player when inserted into the PC. My son couldn't make it work on a 5-year player, he got with a 3D TV. He said that the player would say that it accesses the disk, the light flashes a few then the disc is ejected. Is anyone aware of what could be the problem?

  Joe C

  Œuvres player from Panasonic, Samsung is not... which seems to support my thesis that 'some' players do not work with a serious BluRay

• My hard drive is filling up all the available space on my hard drive

  Original title: my drive is 'eat' himself!

  Something happens in my system which occupies all the available space on my hard drive.

  I deleted everything that I possible can, but as soon as I create a space that it disappears.

  There is apparently a function involving my e-mail archives or my installation "restore."

  Recreate the data but do not delete the file/data who is who replaces it.  What has

  happened in the past, but at that time, it was the result of my control one inadvertently

  email replication function... this time I got nothing done to cause this duplication of work.

  When it started to affect my system this time I looked for things to remove and found

  many of my emails in the "sent" folder had been duplicated.  I immediately removed all

  These duplicates and has acquired an important place but in a short period of time the

  disc had been filled again.

  I ran anti-virus (McAfee) and combating malicious programs (Malwarebytes) without finding

  anything that can be causing my problem.

  Thanks in advance for any help.

  Hello

  Try the methods provided following and check if that helps:

  Method 1:

  Try to run the disk cleanup tool and check if it helps:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  Read the following article and see if it helps

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Also check out the link and check if it helps:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• How to make a panelTabbed to occupy all the available space?

  Hello
  
  I have this simple structure in my page, but I can't do the panelTabbed occupy all the available space in the page:
  
  Page:
  

  panelStretchLayout
     Facet Center:
       PanelGroupLayout - Scroll
          PanelBox
          PanelTabbed
              ShowDetail1 (anything inside, tables, etc..)

  Now, the panelBox and and panelTabbed are at the same level. But I can't get the tabs expanded according to the space available under the panelBox max.
  You have an idea, the special properties to set are there?

  If you want the component panelTabbed to stretch all the senses, you must use a different panelStretchLayout like this:

  Edit: no need "AFStretchWidth" style for panelTabbed component, in that provision.

  Published by: Ayhan Gungor on March 23, 2012 14:32

• Why my blu - ray player can't access the contents of third party internet?

  I've owned my reader blu - ray Sony BDP-S580 for about a year and a half and have had no problems with it. A few days ago I noticed that it would link is no longer to third parties including Netflix, Youtube, and Amazon Instant Video internet content. I connected wireless and thought I just needed to recycle my router and the modem (I have a modem from Time Warner Cable and a Linksys Wireless G router). I tried several times, but it made no difference. Whenever I try to start, Netflix, Pandora, Youtube, etc it is unable to connect to each time. I noticed that the player can always connect to Gracenote. I can access Web sites using the integrated in the web browser. I can also stream videos to my PC blu - ray player using the Windows Media Player server. It's just the video and music internet services that do not work.

  In recent days I've done everything I can think of to fix it, but nothing worked. I tried the modem and the router of recycling at least 20 times. I tried to use the wired facility rather by connecting the drive blu - ray directly to my router by an ethernet cable. I have the router configured so that it's not requre the use of Wi - fi protected setup, but I even tried to set the blu - ray player using WPA configuration just in case. I changed the IP address on my router. I reset all the settings of the blu - ray player to factory default settings. I also tried to do a power reset the player. I tried to use "personal information Initialize' who have

  erases all personal data (including all content of third of the unit). None of the above worked.

  I also want to mention that none of my other wireless devices have problems connecting to the internet. In addition, the blu - ray player is about a foot away from my router for the intensity of the signal is not a problem. My router is configured to allow up to 50 devices to connect to it and there are currently only 7 devices that use the connection Wireless (including my roommate). My internet connection speed is 54 Mbit/s, so I don't think speed is the question. The blu - ray player said that the RANDOM connection and internet access are correct. The blu - ray player network connection diagnostic tool says that network connections are correct. My firmware is updated and the player is registered with Aurélien Live Essentials.

  Thank you for taking the time to read my post. Any suggestions would be greatly appreciated.

  I'm having the same problem.  Player has worked wonderfully for the moment I got it almost a year.  He began to do last night.  Rebound, the speed of the network, reset the player to the factory and let it sit unplugged for 15 minutes.  It connects to the network and access to claims that it has internet and connection LINK, but the status of connection to the server provisionsing failed.  Streaming from other LAN devices work, the Web browser works, none of the work of third party services.

  Where are you located, and who is your ISP?  I'm in Central Virginia on Shentel.  Nothing has changed from hardware wise. The modem is Motorola Surfboard SB6141.  It's a modem ONLY... no router functionality.

• My blu - ray player is updated to the red zone

  Will there be an update for the red zone? My xbox has Redbox.

  Hello BubbasBaitShop!

  Instant Redbox is currently not supported on any of our reader Blu - Ray or models of Internet TV. Some information about the availability of the application can be found on these links:

  http://bit.LY/1mlPw7o

  http://bit.LY/1kkU9AN

  If my post answered your question, please click "accept as a Solution.

  Thank you!

• Qosmio X 870-Blue-Ray driver update ends with the error message

  I recently received a message from Tempro for updating my Blue-Ray disk driver. Downloaded, extracted and installed. Error message:

  ....................................... Fix Project Setup Wizard

  ... "The build version of the source is not build target.

  Installation was not completed. At each new start (re-boot"I am again asked to install the new version of the wheat - Ray Disc driver.

  D:\nerladdat\Toshiba\BlueRay\Nerladdaat fran hemsidan\bluraydp-20130117155646

  extracted file is: TC30526100B.exe

  I use a Qosmio X 870-11 G 5C370203Q serial No.

  Grateful for the help to solve them.

  Goran

  What version of Toshiba Blu - ray disc player is installed on your laptop?

  Take a look at this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71240

  * MasterG wrote: *.
  + The error message appears because the Toshiba Blu - ray disc player is already updated. +
  + Generally after the update, the version of Toshiba Blu - ray disc player should be * 1.0.3.196 * +.

  + Before the update, my BD from Toshiba player was 1.0.0.929. After the update, I've got v1.0.3.196 +.

• Blue ray does not work via the HDMI or VGA output to my TV 52 "

  HP HDX X16T-1100

  Vista 64-bit

  512 MB NVIDIA GeForce 9600 M GT (driiver 7.15.11.7948)

  HP Media Smart seems to have asked on 3-11, so I can only assume it is the latest version. Gawd knows where you fined the version number on it.

  When I put a Blue-ray disc in the smart software HP Medic works very well. I can see and watch the movie. When I try to connect my TV via VGA or HDMI I see that the menus and the HP Media Smart interface. There is just a black screen where the movie should play.

  The thing works very well for a regular DVD via HDMI or VGA... problem seems the disc blue ray only.

  Thoughts?

  Nevermind I got it. There are two ways to fix.

  The TV as the primary monitoring, or extend the desktop to the 2nd monitor.

• Discs Blue ray is not recognized in the Combo Blue ray/DVD/CD player in Windows Vista

  I use windows vista in Sony Vio laptop (model-VGN-FZ21M). I have a blue ray/DVD/CD player Combo on it. A few months before this record supported the blue ray discs. But now it does not recognize the Blue ray discs. Could you please tell where what to do?

  Thank you

  Khan

  Hello

  ·          Were there any changes made to your computer before this problem?

  ·          The other CD/DVD to get recognized by the CD/DVD drive?

  Reinstall and update the DVD playback software. Visit the Web site of the software vendor for more information about the update of the software to the latest version.

  Consult the following link: http://support.vaio.sony.eu/computing/vaio/downloads/updates/index.aspx?m=VGN-FZ21M&l=en_GB

• I am trying to burn a Blu - ray on cs6 still, but the same error message.

  Blu - ray error: "device error", Code: Note '3', ' CreateStcSequence: cannot write.»

  I don't know what it is or what it means. Please someone tell me what it is and how to fix it

  This error is probably from multiple sources and it has no uniform solution reported. It can be drive or media. It can be permissions. A reinstall of the still has set at least a situation. Reduce the size of the bitrate/project can avoid the error. Make sure that you still run 'as administrator'.

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• Blu Ray will not connect to the network

  I have a blu - ray player that was able to connect to the internet era the first that I installed it. Now he sees my wireless network but cannot connect to it. All my other devices home plug correctly. Cable connection works fine, but we need a Wi - Fi connection. I tried to reset to factory setting network settings, but it did not help. I was able to connect to other networks that is not the password protected but not connected to the internet. Why did before, but not now, when nothing has changed?

  I did all this and the DVD drive still does not work.  My solution; Take the Sony DVD drive and get another brand that actually works the way it's supposed to.

• StackPane not to fill the available space in the window

  Hi all!
  
  I am facing a problem when you try to resize (even just filling) additional space on a window with a 'structured' node
  
  Explain:
  
  I use this framework to manage several scenes: https://blogs.oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1
  It works fine, but I am not able of to the 'internal' node expand to fill the entire window. I am able to set min width and height to reach the limits of the window, but I would like to set to the mode "full screen" to the node and let the JavaFX do the trick. Is this possible?
  
  I have attached an image to help the explanation. Basically what I want, it's fill the green zone (controlled Screene that extends StackPane) with blue/pink (Gridpane with bottomAnchor = "0.0" AnchorPane.leftAnchor = "0.0" AnchorPane.rightAnchor ="0.0"AnchorPane.topAnchor = "0.0") node.
  I already tried to extend the framework to the node Anchorpane class but did not work.
  
  Please follow this link to the image:
  https://DL.dropboxusercontent.com/u/25373134/screen.PNG
  
  TKS in advance!
  André Castro

  Looking at the blog you linked, there is the following code:

  Group root = new Group();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  It's probably the cause of your problem.
  A group is not a resizable pane, so it does not develop to adapt to its surroundings.
  Trying to root a StackPane instead and see if that works.

  StackPane root = new StackPane();
  root.getChildren().addAll(mainContainer);
  Scene scene = new Scene(root); 
  

  If this does not solve your problem, please post the full content of the file FXML you use and use a harness to test you app to display.