Blue screen in Windows 7 problem

Similar Questions

• Need help blue screen of Windows XP problem

  OK, so my computer has sent me to blue screen whenever I try to reboot because I turned off my pc via button when I had a bunch of programs that run... Ive done a little research and I had the operating system disc and tried to make 2 repairs a running chkdsk/r and a/p, and he is always send me a blue screen with STOP: message

  STOP: 0X0000007B (0xF78A2524, OxC0000034, 0x00000000, 0x00000000

  any help would be appreciated... If you need more information please ask :)

  Hi FiatFen,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Equium A110-276: blue screen of Windows Vista error

  OK, so I installed Vista and works perfectly until I got a blue error screen! I don't know what the problem is. What you think is the problem? Memory? BIOS? I updated my bios to version 5 for vista... I updated my computer from here http://pc-support.toshiba-europe.com/vista/

  Anyone know the problem?

  I use Equium A110-276
  1024 MB OF RAM
  Core Duo 1.67 GHz
  Windows Vista Edition Home Premium

  Help please! THX

  Blue screen and Windows nothing unusual. Am I wrong? ;)

  Sorry, but it is not easy to say what the problem is here. I use Vista for two months without any blue screens and you really can't wait until someone can give you a clear explanation here.

  Blue screen occurs due to different circumstances. May be software related conflict... Check out the software for some compatibility problems

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• crash blue screen of Windows 8

  I've updated to windows 8.1 and realized that the games run slowly on it. Then I updated my software drivers so I spent again to windows 8. But when I did that my laptop started to crash at a random moment when I was playing a full screengame or watch a vid on youtube full screen it hangs and said if you want more search information for driver iqrl not less or equal.

  I would apreiciate if someone wants to help me.

  -Devil

  Hello

  Thanks for posting your question in the Microsoft Community.

  The DRIVER_IRQL_NOT_LESS_OR_EQUAL error usually occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  • Did you just install a new program or a piece of hardware, update a driver, install an update, etc. ?

  • You get the error message? Please provide the exact error message / error code.

  I suggest you try using the methods below and check if it can help solve the problem.

  Method 1: Run the Safe Mode and perform a clean boot

  Step 1: Safe Mode. Safe mode is a troubleshooting mode that starts Windows with a minimal set of drivers and services. Start your operating system in this way and see if the problem appears.

  Start the computer in safe mode with network and check if the problem persists. Follow these steps to start the computer in safe mode.

  Click on the link and follow the steps in Start parameters of Windows (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not exist in safe mode, try to perform a clean boot and check.

  Step 2: Perform the clean boot.

  Reference: How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135  

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  If the problem persists I suggest you follow method 2

  Method 2:

  Resolution of errors blue screen in Windows

  Reference: http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

  IMPORTANT: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Also check your installed programs. If you see something that you have not installed and is not part of Windows, use the Remove Programs option.

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you

• Blue screen after update KB2982791 problems

  I have a Windows 7 update to Windows 8 64-bit.

  Blue screen (Stop 0 x 50) after you apply update KB2982791 for Windows 7 Home Premium 64 bit is also valid for the W7 to W8 update?

  Original title: This applies to uppdated Windows7 to Windows8

  Hello Nils,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with this particular update (KB2982791) after which there are blue screen in the computer. We are happy to help you in the matter of fixing.

  You can follow the following suggestions to solve the problem as soon as possible.

  First of all, try to follow the link below to learn more about the update.

  MS14-045: Description of the update of security for kernel-mode drivers: August 12, 2014

  http://support.Microsoft.com/kb/2982791/en-us

  In addition, the blue screen (Stop 0 x 50) could also related material being. This can occur after installing faulty equipment or failure of the installed equipment (generally associated with a faulty RAM).

  In addition to the advice provided, try to run the Diagnostics memory test to check memory problems. See the link for the same mentioned below.

  How will I know if my computer has a memory problem?

  Additional information:

  Resolution of errors blue screen in Windows

  Note: When you use Sys tem Restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Important: When running Chkdsk on the drive hard if bad sectors are found on the disk hard when Chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you come.

• Blue screen of Windows 8 with various errors

  I want to HP dv6 provided with Microsoft 8 on it (it's only a year today)

  The problems that I encountered:

  -L' computer would freeze with a screen colorful weird pixelated

  -L' computer freezes while attending a bsod (you could tell because the screen would be the light blue color, but would not have error codes or restart)

  -L' computer would go to a bsod with an almost different error code every time (sometimes I couldn't write before it will re-start)

  -system_thread_exception_not_handled (dxgmml.sys) or (dxgkrnl.sys)

  -"KMODE_EXCEPTION_NOT_HANDLED"

  -page_fault_in_nonpaged_area (ntfs.sys) (it's the one I see most often)

  -memory_management

  -IRQL_not_less_or_equal

  -kernel_security_check_failure

  -driver_overrun_stack_buffer

  All these problems have occurred during various tasks, never the same as the one

  - And now I can't even on the computer because as soon as I turn it on it tries to auto repair, but fails. It then takes me to the boot menu where I tried all options, without success.

  I don't have any sort of installation dvd or windows dvd backup.

  I do not know what I did to make this crazy computer, but please help me to make happy again because I have no money against hepatitis a for professional help not to mention a new computer.

  OT: Computer Hp Windows 8 / I don't know what the problem is or how to fix it.

  Hello

  Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  I suggest you try the steps from the following link:

  Resolution of errors blue screen in Windows
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  Also check if there are errors listed in Event Viewer.

  Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error.

  To open the journals please follow the steps.

  Press the Windows key + W
  Type 'view event logs"on the splash screen and press enter.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• Blue screen in Windows 7, Dell vostro 3450 problem.

  the blue of the screen what I...

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 16393

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA800787E200
  BCP3: FFFFF80000B9A3D8
  BCP4: FFFFFA8008CF63E0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  I've seen this problem twice. Simply, I closed my laptop computer LCD screen constantly. When I open screen after some time, I got this blue screen. Please help me.

  These are associated with the TeeDriver.sys Intel(r) Management Engine Interface of Intel Corporation

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• Equium P200 - XP has a blue screen after Windows XP Setup

  Please can someone help

  I installed XP (INSTALLED the DRIVERS SATA) successfully

  When Xp tries to start for the first time I get a blue screen of death (I can't read the content, because it's fast to)

  I've read that native sata must be disabled in the bios (no option for this in the bios)

  Cannot start in safe mode or any mode. Originally came with vista.

  Help, please

  Hello

  I don't really know what can be the problem but one thing can be interesting: you have installed Windows XP SP2 home edition?

• Satellite L555 - 10 M: blue screens in Windows, the system very hot, very noisy fan

  Hello

  Since yesterday my laptop shows a few Windows blue screens with the following values:
  (no value or empty)
  PAGE_FAULT_IN_NONPAGED_AREA
  PFN_LIST_CORRUPT.

  Some auto repairs were performed by start-Help/Systemstartreparation.

  After restarting the system in securitymodus and anti-virus disabled
  the following checks were made:

  (a) chkdsk c:
  The file system have been checked and no problem not found.

  (b) sfc/scannow
  Windows-Resourceprotection found no integrity issues.

  The system works only in time and
  After a few minutes, the laptop will be very hot and the fan works very hard
  the judgment of the work system,
  the mouse stop working,
  There is no activity on the disk system c
  the system shows reactions
  Finally appears with PFN_LIST_CORRUPT blue screen.

  Could you please help?
  Thank you.

  What did you do with your machine? do you have additional software installed or upgraded something?

• 1E error blue screen on windows server 2008 r2

  Hi friends,

  Please help, I do face with blue screen error 1e, although helping to solve this problem,

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.274.10
  Locale ID: 1033

  More information about the problem:
  BCCode: 1e
  BCP1: 0000000000000000
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 274_3

  Files helping to describe the problem:
  C:\Windows\Minidump\112914-22651-01.dmp
  C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  [Moved from the community centre of Participation]

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

• Blue screen after Windows updates

  Today, I got 12 updates to Windows update under Vista (security and others for internet explore). I use the 64-bit version and I get a blue screen and start each update even when I try individually. This is not the first time...

  No one knows why this happens?

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796