Blue screen on HP Smart 520-1070 UK

Hiya all!

I had a HP Smart UK 520-1070 for two years, no problems, the fact is that I love it! Yesterday, frozen screen I had to turn it on, the power button went to the usual black screen, or start normally repair options. try both, I go to a blue screen Uni, not the usual with the error messages and writes white. Looks like a blue curtain or a wallpaper that comes with your PC, white with no writing, you can see my cursor arrow of my mouse, looks like much more than normal, as in safe mode, I can move it, only thing open for me is in the power off.

I tried all the keys functions 2, 8.10, 11, 12, when I try to use the restoration, repair, safemodes etc ect. everything always goes back to the blue screen. I haven't added a new hardware or software, no Center Download Windows for days. I did an AVG virus scan and Spyware Scan two days earlier, just good. Defragmentation of disks all checked and doesn't have or need to Defrag.

Upwards, I have 4 drives I did when I got the PC, first did my DVD/CDboot, started loading of STI. disc starts loading then finally goes back to blue screen. I can't afford to have this fixed by HP for my next step is the local engineer, no problem if it can return to the factory settings, but if the hard drive was missing I am sure that I will get my windows seven back but I'm afraid I'll lose everything HP as T.V. Beats Audio and etc touchscreen. Is this the case?

Is it possible to but a disc of HP to help me get up and running with the factory settings, as Iam unable to access in the usual way of my system.

Sorry for the entire quantity long information and issues, but as you can see I think I can have all tried lol

Best wishes from Scotland

PJR_1957

Hello @PJR_1957,

I understand you want to know if you can get a HP disk to fix the blue screen, you have found. I think that you are facing a hardware problem, but it would be cheaper if it's software and that can be replaced IF you can find a recovery disk. The only way I can help you get a new recovery disk is to provide HP support document: get a HP recovery or a recovery HP USB disk drives, which will describe and explain all the different ways to get a new copy of your recovery media.

Good luck! Thanks for posting on the HP Forums. Have a great day!

Tags: HP Desktops

Similar Questions

  • I have new Dell Inspiron 15 7000 2-in-1 graphics card = Intel HD Graphics 520 only see a blue screen in the develop module is the graphics card not supported?

    I just new Dell Inspiron 15 7000 for Lightroom on road.

    Graphics Intel HD Graphics 520 =

    Only get blue screen to develop the module

    This card is not supported?

    It works as Lightroom uses is no longer your GPU for rendering of image in the develop module.

    Please see the FAQ and the troubleshooting of Adobe Lightroom GPU

    ~ Assani

  • [SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

    [Problems]
    Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time
    Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast
    Solves delays random system - system shuts down randomly for no apparent reason
    Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2
    Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.
    [Source of problem]
    The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft.  6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.
    Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.
    [Clean Install FIX]
    When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.
    Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.
    [Windows OS already loaded FIX]
    -Device Manager-
    Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).
    Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.
    Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.
    I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D
    After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
    • Event ID: 1001 Source: error checking
      The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.

      The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.

    OS: Microsoft Windows 7 Ultimate 64 bit
    Antivirus: Microsoft Windows Security Essentials
    Motherboard: Gigabyte GA-890FXA-UD5
    RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

    Video: Diamond ATI Radeon HD5850 1 GB DDR5

    PROCESSOR: AMD X 4 965BE
    HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K
    PS: Antec EarthWatt 750W PSU V2.3
    KB: Logitech G15
    Mouse: Razer Deathadder 3.5 G
    Gamepad: Belkin n52te
    First try to solve this problem:
    Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.
    At ran Windows Update for the current patches. Random BSOD on restart.
    Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.
    Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.
    Run the checker - 90% chance of BSOD
    Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

    Second attempt to solve this problem (low-level format):

    Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.
    Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00
    Clear the result of the boot record - 0x00
    Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00
    Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)
    Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file
    Change the BIOS settings-
    Integrated Peripherals-
    OnChip SATA Type [Native IDE] change on [AHCI]
    (No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

    Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

    Install the driver USB 3.0 NEC 21:22 - result - GOOD
    Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

    Install the network drivers Realtek Lan_win7 - result - GOOD

    Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

    Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

    Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

    Shutdown - 21:51
    Power - result - GOOD
    Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD
    Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

    Install Google Chrome - result - GOOD

    Install Fusion - 2.0.1.117
    Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.
    Shutdown
    Power - result - GOOD
    Install the G15 - result - GOOD
    Install Windows Ventrilo 3.0.5 x 64-GOOD
    Install the Steam Client

    Install COD4MW2

    Change the settings to save energy for the computer to never sleep.
    22/05/2010
    Install gtalk, gApps
    Up to 08:57 05/22/2010 BSOD Mini dump.

    Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

    BSOD more 2s on 2 days.

    Hello

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top two responses.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

    ===========================================

    The material is highly suspect!

    Since you reformatted and reloaded Windows this indicates that the problem is either material or a
    very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
    mouse or keyboard, BIOS, chipset and other low level drivers.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    ------------------------------------------------

    Even if you have some of these here tried a fairly complete convenience store just in case.

    BCCode: 7F 0x0000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x0000007E<-- read="">
    * 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    -----------------------------------------------------

    BCCode: 109 0 x 00000109

    Cause

    There are generally three different causes for this bug check:

    1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.

    2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.

    3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.

    BCCode: 109 0 x 00000109<-- read="">
    * 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

    --------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Qosmio G35-AV600: blue screen during the installation of Vista?

    Hello

    I have a G35-AV600 one I am trying to install windows vista.
    I followed all the instructions for the driver raid and all with pure install.

    But my problem is that, after the first reboot, I get a blue screen with an error message.

    I know that some people had the same problem since they were posted here but no solutions have been posted.
    Please if you have an idea how to solve this problem, help me, I'm desperate.

    Thank you.

    Hello

    We need more information to try to help you.

    As a first step:
    Have you upgraded your Qosmio G35 to be a Vista capable?

    BIOS available for download from the Toshiba Web Site:

    Version 3.30 25/01/2007
    Changed the BIOS to be compatible with Windows Vista.
    Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
    Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
    FIX: A smart card containing a TI controller is always set to disabled.
    Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
    Fixed: Ensure a remote to work Express Media Player.
    Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
    Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
    It is the first version of BIOS for PQG33U models.
    This BIOS supports Windows Vista and XP.

    But my problem is that, after the first reboot, I get a blue screen with an error message.

    Would you please, let us know what is the error message when you have a blue screen?
    Report any information given at the bottom of the blue screen.

    Francisco

  • Windows 7 blue screen, sleep mode monitor.

    Hello, I have a hp series p6000 desktop product # BT503AA #ABA. And I get a blue screen crash dump and keep saying my monitor goes into sleep mode. Help, please. I swiched monitors and the same results. computer is used for family only, no company. It is running do not install windows 64-bit and some windows updates.

    Really sounds like a software problem, but could be a hard drive problem.

    Boot tapping F10 select your hard drive, then SMART support, run a short self-test. If it goes, try to run a last good known Configuration.

    Start type F8 and select last good Configuration know. This will automatically return the system for when it was working properly.

    Let me know the result to your convience earlier.

  • Blue screen after reboot during the installation of the security updates.

    Am also having problems with the blue screen when you restart to install the updates of security (1 blue screen while the computer turns off), which began before 11 security updates 13 Oct.

    These updates of security of the Oct. 13 show as pending. Then uninstalled reintsalled via windows update and still see the as pending. Also received blue screen during the uninstallation of security updates.

    Using ESET Smart Security 4.2.58.3. Removed McAfee supplied with the computer.

    Computer seems to work very well with pending status updates - no more blue screens during use. The latest version of windows update.

    Please notify

    Problem solved blue screen - had to uninstall and reinstall the suite ESET Smart Security.

  • Predator G9-591-70XR - blue screen AV installation

    My brand new laptop resuses to install no matter WHAT AV which integrates firewall protection. There seem to be a problem before the wifi and blue screens drivber system and I so need to use safe mode to remove the partial installation so that I can boot into windows 10. So far, I tried Eset Smart Security 9, Trend Micro, Kaspersky, etc.. All the crash on to halfway through at the start of the pilots. Everyone sees the same issue?

    HY,

    You can download the new killer networking drivers and try. They fix most of the accidents in the new driver

    Here u go http://www.killernetworking.com/support/driver-downloads

  • Error on blue screen and missing or invalid or component file causing Windows crash.

    Original title: missing or invalid files or components.

    Missing or not valid file or item causing windows/internet to freeze and crash. A BSOD (blue screen) shows a second and the computer restarts back on the desktop with no other problems. This happens only when I open/close a video too fast or I use some (L100 - 30 Hercules) aircraft in FS9. All other devices work fine. I sent an error report to Microsoft tonight when this happened. It conrcerned 2 files in C:\ Docs & Setting\All Users\Application data\Microsoft\Search\Data\Applications\Projects\System Index\System... (couldn't do the rest, but we had to do with the XML extension..) I am using Windows XP Pro with Service pack 3 and all updates.

    Is there a simple solution for this? I don't want to reinstall XP if I don't have, as my drive my being corrupt. I'm not sure. I also used some older programs that I have used for years that run fine on XP but will not work in Windows 7 even with Virtual XP Mode installed.

    Hello Joel S

    I had already tried this and it was not a hardware failure. I ran chkdsk and the player revealed a good with no bad sectors. I also use Belarc COMPUTER management systems that manages the health of smart HDs (HDs most have this 'Intelligent' ability). The problem was some legacy software that I thought that I had taken when I did a removal of the program. He left 5 pieces of something that is called «online...» "I found it using Malwarebytes, and he was buried deep in the registry. The program was "Cliffs of Dover" a stream online to run the program. Once you have downloaded the game was the only way to use it online, which took 20-30 minutes to load and once loaded would break your system if you have tried to play. Shame, it's a beautiful CFS, but way to buggy.

    In any case, removed from the basket with Malwarebytes and every thing works fine. No more accidents.

    Derek

  • Get blue screen errors. My hard drive died?

    Original title: hard drive crash?

    Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

    Finally, my hard drive failed? A few months ago, I had a virus so I had to back up my entire hard drive on my Toshiba laptop. After I did this whenever I started it, I had to press F12 to load device of your choice. Then he said something on the hard drive failure 4, stuff like this press F1 to continue. I usually do and it runs slow but the other day I went through the process, and he came to load Windows XP then blue screened with c:0000218 (a registry file failure). I've tried safe mode, safe mode with command prompt last good known configuration and start normall. I always get blue screen and sends me in a boot loop. I tried also to insert the OS and restore CD that has not been loaded. Went through the process above.

    What do you have with regard to the virus out of your backup drive?

    How - to what support - did you back up your drive?

    Is a version of Norton antivirus or security program installed?

    When you use F12 to select boot device, what device were chosen to boot from?

    The message you have seen 'SMART failure provided on disk hard 4' followed by an identification of the drive?  What disk drive has been identified?

    What happened when you tried to use the CD "OS and recovery?  Please report any error completely, without paraphrasing.

    See the following tips from frequent poster Jose Ibarra:

    For those who STOP: c0000218 error, a chkdsk /r usually will fix you right up and then you will start normally once again, then it will be broken again with the same problem until you run chkdsk /r once again, so you have to work, do what you have to do when you get started - uninstall Norton completely and correctly.

    After the chkdsk/r, you will still be able to boot mode safe but as Norton components not load safe mode and rush through the file system when loading.  Then you can go on the WWW of Norton of the site and use their instructions to get rid of the beast to uninstall...

    [https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home]

    Here are some instructions in order to at least run the Recovery Console:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

    Whole new generation that has been very well,

    Mobo: EVGA P55 SLI,

    Processor: Intel Core i7 860,

    RAM: Mushkin matched 2 X 2 = 4 GB

    PS: Blue Antec 750W

    GPU: EVGA Nvidia GTX 260 SLI (x 2)

    HD' Samsung 750Go (x 2) RAID 1

    DVD RW

    Blue Ray RW

    OS: Vista Edition Home Premium 64-bit

    System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

    From there on, I was not able to start Windows.

    I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

    Blue screen says:

    A problem has been detected and Windows has shut down to prevent damage to your computer.

    IRQL_NOT_LESS_OR_EQUAL

    If this is the first time...

    Check that any hardware or software is installed correctly.

    technical info:

    STOP: 0X0000000A

    (0xFFFFFA8D839EFB18),

    (0 x 0000000000000002),

    (0 x 0000000000000001),

    (0xFFFFF8000A481DD2)

    I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

    Once the bar then "fills" Blue Screen of Death!

    It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

    Hello

    You get beeps when it worked? This is not normal.

    Computer MESSAGE / beep codes
    http://www.computerhope.com/beep.htm

    =======================================

    Think that material:

    Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
    updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
    suspects. Next message is my generic driver updated methods to use when you get to this section of the
    troubleshooter.

    You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    Look in the Event Viewer to see if something is reported on these reboots.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    BCCode: a

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Solve the problem

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.
    2. Press F8 to character-based menu that displays the choice of operating system.
    3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
    2. Try disabling the cache in memory of the BIOS.
    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
    4. Make sure that the latest Service Pack is installed.
    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

    -------------------------------------------------------------------------

    It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
    information on all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Blue screen and CORE-DATA-INPAGE-ERROR Message

    The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

    Indeed, I am here!

    Thank you for fixing links.

    The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

    This indicates that a kernel-mode program generated an exception which did not catch the error handler.

    8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

    0: kd > 9eaa4efc ln
    (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

    The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

    0: kd > k
    ChildEBP RetAddr
    e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
    e551ba70 8409584 has nt! KiDispatchException + 0x1a9
    e551bad8 840957fe nt! CommonDispatchException + 0x4a
    e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
    e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
    e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
    e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
    e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
    e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
    e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
    e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
    e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
    e551bcdc 8423f47f nt! PspExitThread + 0x4a0
    e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
    e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
    e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
    WARNING: Frame IP not in any known module. Sequence of images may be wrong.
    04adf6dc 0x77a95d14 00000000

    Associated police crashes, likely a buffer overrun.

    ---------------------------------------------

    1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

    * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

    2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

    Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

    avast! removal - http://www.avast.com/uninstall-utility

    MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

    3 uninstall Smart Defrag as soon as possible.

    4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

    Kind regards

    Patrick

  • League of legends blue screen

    Recently, my laptop has been blue screening whenever I try either to run League of legends, the error is dumping memory physics 0x0000007f. A week previously, I played League of legends, the laptop works very well, why that happen? Can anyone help? THX!

    Blue screens are caused by defective material or defective hardware drivers.

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

    To see if any recent system change caused it

    In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

     
    Standard hardware troubleshooting
     
     
    First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...
     

    Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

     
    Diagnosis of memory
    If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.
     

    S.M.A.R.T
    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
     
    WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List
     
    If it is on will be true, otherwise on enable in the BIOS of the computer.
     
    Predict the failure must be False if everything is ok.
     
    In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

     
    Run chkdsk
    In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

     
    SFC
    Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    sfc/scannow
     
    Heat
    Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
     
    Processor (CPU)
    Intel has a utility to check processors.
     
    32-bit Windows

     
    Bit 64 Bit, Windows
     
     
    For memory diagnostic results
    Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.
     
    Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

     
    Double-click the entry for more details on this entry.

    For results of Chkdsk

     
    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    change c:\bootex.log
     
    What is this file exist with something in it?
     
    The following commands query the event logs.
     
    To start verification by using the name of the source for any version of Windows (because it varies).
     
    WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm
     
    To run chkdsk in Windows.
     
    WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm
     
    For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.
     

    WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm
     
    Then to view the created file.
     
    Start "" "% userprofile%\desktop\DiskEvents.html"
     

    Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

     
    Look for EventID is 7 and Source disk
    Look for EventID is 11 and the Source disk
    Look for EventID is 50 , and the Source is disk
    Look for EventID is 51 and Source disk
    Look for EventID is 52 and Source disk
    Look for EventID 55 and Source is NTFS
    Look for EventID is 130 and Source is NTFS
    Look for EventID is 134 and Source is NTFS
    Look for EventID is 137 and Source is NTFS
    Look for EventID 1001 and Source is Autochk
    Look for EventID 1001 and Source is Winlogon
    Look for EventID 1001 and Source is WinInit
    Look for EventID 1001 and Source is Chkdsk
    Look for EventID is 26212 and Source is Chkdsk
    Look for EventID 26213 and Source is Chkdsk

    Look for EventID 26214 and Source is Chkdsk
    Double-click the entry for more details on this entry.
     
    PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
     
    If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
     
    For the results of the SFC
    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
     
    It will be able to see which files are corrupted.
     
    To see if there
     
    findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more
     
    There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Also due a beginning by WD .mof files update may also be reported. Ignore these.
     
     
    Dump files
     
    Dump files are files containing the status of the machine when it crashed. We can analyze the file to identify the driver (or program) causing the accident. See the last section on how to get them analyzed by a volunteer.
     
    Analyze dump files
    If you want to analyze your own dump files.
     
    You need start exploring as an administrator to access the files in C:\windows\Minidump. Explore a right click and choose run as administrator.

    Download and install the debugging tools for Windows
    Install Windows SDK, but simply choose the debugging tools.

    Create a folder called symbols in C:\

    Start Windbg. Menu file - path to the symbol file and enter


    SRV * C:\symbols* http://msdl.microsoft.com/download/symbols
     
    Close, and then reopen WinDbg. Menu file - Open Crash Dump

    It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

     
    Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. If it shows a driver, you will need to update the driver identified. Most of the pilots are in c:\windows\system32\drivers.
     
    Look for the drive for a file.
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type by replacing drivername.sys by the name of the file (or copy and paste by clicking in the command prompt window and choose Paste).

    dir c:\ drivername.sys/a/s

     
    If it has a file system see if you can get a program to analyze - v.

    Type in the theWinDbg command prompt

     
    ! analyze - v
     
    -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.
     
    for example
     
    Nom_processus: java.exe
    Nom_image: ntkrnlmp.exe
     
    Nom_processus does not appear in the output of v - analyze and only if a program is from the call that was blamed.
     
    Download them for analysis
     
    Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.
     
    SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

    If you downloaded one of the Live applications or a web site based Live mail account, you already have access to your Skydrive.

    Put your list of events in the Public folder and copy the link in the address bar.

    .
    --

  • Blue screen error: driver_irql_not_less_or_ equal 0x0000000D1 (0x0000E001, 0x00000000A.0x00000008, 0x0000E001).

    Original title: BSoD error w Windows Vista.

    I have a HP dv7 laptop. In October, my hard drive died, and I sent it to replace. Two months later I came back and install a new copy of Windows Vista Home Premium on it. Since then, I haver been getting a BSoD equal driver_irql_not_less_or_. The technical specifications are 0x0000000D1 (0x0000E001, 0x00000000A.0x00000008, 0x0000E001).

    I ran diagnostics on the hard drive and memory and still can't find the problem. Can someone please?

    You can ignore the memory diag. And chkdsk too if you did a full surface scan, but review logs of events anyway.

    Blue screens are caused by defective material or defective hardware drivers.

    To see if a fix is available

    In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post the details here.

    To see if any recent system change caused it

    In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

    First to test we can the material.
     
    Standard hardware troubleshooting
     
    S.M.A.R.T
    Click Start - All Programs - Accessories - Right click Command Prmodel and choose run as administrator.
     
    Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)

     
    WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List
     
    If it is on will be true, otherwise on enable in the BIOS of the computer.
     
    Predict the failure must be False if everything is ok.
     
    In Vista and later if SMART failure predicted Windows prompts the user to run the backup.

     
    Run chkdsk
    In computer discs right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

    SFC

    Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

    sfc/scannow

    Diagnosis of memory
    If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

    For results of Chkdsk
    Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.
     
    Look for EventID is 7 and Source disk
    Look for EventID is 11 and the Source disk
    Look for EventID is 51 and Source disk
    Look for EventID is 52 and Source disk
    Look for EventID 55 and Source is NTFS
    Look for EventID is 130 and Source is NTFS
    Look for EventID 1001 and Source is Autochk
    Look for EventID 1001 and Source is Winlogon
    Look for EventID 1001 and Source is WinInit
    Look for EventID 1001 and Source is Chkdsk
    Look for EventID is 26212 and Source is Chkdsk
     
    Double-click the entry for more details on this entry.
     
    PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.

     
    For the results of the SFC
    Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

    findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
     
    It will be able to see which files are corrupted. We may be able to copy it from another computer.
     
    For memory diagnostic results
    Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.
     
    Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

     
    Double-click the entry for more details on this entry.
     
    Analyze dump files
     
    If you want to analyze your own dump files. (C:\windows\Minidump).

    Download and install the debugging tools for Windows
    http://msdn.Microsoft.com/en-us/Windows/hardware/hh852363
    Install Windows SDK, but simply choose the debugging tools.

    Create a folder called symbols in C:\

    Start Windbg. Menu - symbol file path of the file and enter

     
    SRV * C:\symbols* http://msdl.microsoft.com/download/symbols

    Close, and then reopen WinDbg. File menu - Open Crash Dump

    It will analyze the crashdump. You must close and reopen WinDbg for each analyzed dump file. Because you download symbols from the internet WinDbg seems to be to do nothing. But it's the download. Be patient.

     
    Looking for a driver or a library system that the incident occurred at the end of the list. Find the file, do a right click then Properties - Details tab. You must update the driver identified.

    Type in the theWinDbg command prompt

     
    ! analyze - v
     
    -v means Verbose and if the accident was created by a program, as opposed to hardware or a driver, it will appear in the middle of the list.
    Or download files minidump to your Public SkyDrive folder and copy the link in the address bar, and I'm going to do an analysis.
     
    SkyDrive is the download file from Microsoft, Windows Live, at https://skydrive.live.com/site.  Read about it at http://explore.live.com/skydrive.

    If you have downloaded one of the Live applications or a website based Live
    e-mail, you already have access to your Skydrive account.

    Put your list of events in the Public folder and copy the link in the address bar.

  • Blue screen after installing pentium D 960 on windows vista

    I recently bought a pentium D 960 on Ebay. It works very well for a while, then I get a blue screen Page_fault_in_nonpaged_area. My computer is a compaq presario sr2163wm. Compaq said that the processor should work. I don't think that the processor is bad because I ran it on the same machine with linux Ultimate Edition 3.0 for 3 days straight without any problems.  also had a blue screen which says something about an incorrect header? I had problems with windows stop but not the material, before I installed the processor. I just reinstalled windows with source material (the only way to really install windows with a recovery cd). One last thing, I use a Galaxy Geforce GT 520 to 810 MHz and 2048 MB of DDR3. system has 2 GB of DDR2 ram. chipset is a xpress 1100 ATI (northbridge and sb600 southbridge. 4 mb. bios RC415 latest revision 2008 5.34 (5.3 something) metagrads, Inc. of vista sp2 fully updated home base.)

    The combination seems to be OK, based on the specifications of the motherboard.

    You can contact HP about the problem you are having and see if any similar problem has been reported with the Pentium D 960.

  • Blue Screen UNEXPECTED_KERNEL_MODE_TRAP 0x1000007f ntkrnlpa.exe

    original title: BSOD with ntkrnlpa.exe tried a few driver updates but still little time to another one the BSOD

    Here's the Minidump file:

    Mini091310 - 02.dmp 13/09/2010 22:57:23 UNEXPECTED_KERNEL_MODE_TRAP 0x1000007f 0 x 00000008 0x805d3130 0x00000000 0 x 00000000 ntkrnlpa.exe ntkrnlpa.exe + 78191 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.0.6002.18267 (vistasp2_gdr.100608 - 0458) 32-bit C:\Windows\Minidump\Mini091310-02.dmp 2 15 6002
    More recently when installing a new driver for my wireless smart card; Ran a mem Bios and hard disk check came back ok. Which leads me to believe it's a software; This blue screen popped up after that ride updates of vista, which was released around early August made a rear roll and everything worked fine. The blue screen would leap upward when I could connect to a wireless network; not had time to play with it so I just rolled back the update. Finally had updated the driver today and it blue screened after installation of the driver, so I am at a loss, any help would be very beneficial.

    Hello

    If you meet this new,

    http://mikemstech.blogspot.com/2011/12/troubleshooting-0x7F.html

Maybe you are looking for

  • Norton Antivirus

    Is Norton Internet Security, which settled with the computer laptop enough, or can you offer me the upgrade to Norton 360?

  • uprageing my hp DV7-6B40EO with processor Am10

    Well I prosume this model uses only socket Fs1, my choice A10 4600 m uses Fs1r2 socket Can I do this configuration works? What happens if I want to change my motherboard in the following: http://www.ebay.com/itm/HP-ENVY-DV7-7000-AMD-Motherboard-48-4S

  • EIGRP authentication Switch 3750

    I want to know if I can use md5 with cisco 3750 platform version 2 authentication, and if there is a problem if it has heel of routing?

  • How to become a Certified Installer.

    Hello. I would like to know how can I become an authorized installer. Lets say I have a company and I would also like to install windows PC clients. How can I get license or this package should I buy Microsoft? I don't think I should buy one license

  • Availability of Adobe CS5 license

    How can I find out how many licenses available for adobe creative suite 5 master collection? and can I deactivate a license on one computer and reinstall or activate on another?