Blue screen after installing pentium D 960 on windows vista

Similar Questions

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• Satellite A205-S5804 - blue screen after installing XP

  Hello.

  I tried to do it twice in vain both times. I have the XP disc and I used it on my desk before so it does not work. Installation is finished and after it is done XP load and there is this blue screen that appears as a fraction of a second and I'm unable to read and then restart the PC. Very frustrating.

  I'd like to really all the help that you can offer me. Toshiba customer service told me that this model only supports Windows VISTA, but there must be a way. Please help me.

  Moled number psaf3u-0nr00v

  Toshiba Satellite A205 - S5804

  Hey,.

  Do you also have problems with the Toshiba Recovery disk or the Windows XP disc?

  The problem is probably related to the drivers SATA may have installed XP correctly when you change the HARD drive in the BIOS from AHCI compatible?

• Satellite P200-1BA: blue screen after installing Bluetooth (BT 7.1 stack)

  Hello

  I would like that you suggest me solving this problem. I installed Win 7 on my laptop TOSHIBA (satellite P200-1BA). and installed all necessary drivers downloaded from the official website. But only the bluetooth driver produces the problem. When I install it, first it appears driver installed successfully, my intention to restart. After rebooting once windows starts (desktop appears) all of a sudden blue screen and the computer restarts again and again with blue screen that appears until I have disable bluetooth.

  Anyone who encountered this problem too, or that someone has an idea on his reason?

  It's very strange. I've installed several times on different models with different operating systems and all went well.
  Are you sure you are using the 32-bit version for 32 bit OS?

  What operating system is preinstalled on your laptop?

• blue screen after installing the updated driver intel chipset

  I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

  Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

• Blue screen after installing SP3.

  OK, I got a laptop the other day of a member of the family... was working fine when I got it I was behind on updates... so I downloaded and installed service pack 3 and when I restarted the laptop I get the blue screen... I tried to boot in safe mode to remove the SP3, but even when I try to start in safe mode I get projected blue...

  Here is the error I get:

  IRQL_NOT_LESS_OR_EQUAL

  Technical information

  STOP: 0X0000000A (0X00000002, 0X00000000, 0X3F3F3F3F, 0X804F9C6B)

  If anyone has a solution to this help please!

  Do what you should have done when the computer has been given to you: format the HARD drive and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• blue screen after installing new graphics card

  Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista will boot into safe mode without problem & also start normally when I reinstall my old card. my system is fully updated & all drivers are up to date.

  A way to solve this problem

  Thank you very much for the help, discovered that the graphics card was defective. Tested my friends GT 220 card in my system & installed without any problems. Anyway, I picked up the card & brought a radeon HD5450 instead, installed without a problem, then I say problem solved.

  Thanks again wb2001

• I get a blue screen after installing windows7

  I have intermittent blue screen of death after installing windows7 home premium on Pavilion m9040n. Can anyone help?

  It is indeed a clean install of windows 7. Thanks for the reply, I solved the problem. The problem is I have a Hauppauge winTV TV tuner card is installed and cela mucks the other pilots on this installation. Everything went well after I got rid of the TV card. It seems that hauppage isn't a suitable driver for their card and windows 7 install their WDM driver for him and it does not. When I try to use the TV card and not a few seconds later, I get a blue screen of death and fans try to work overtime for an unknown reason.

• Satellite M100 PSMAOA - blue screen after installing Vista Bluetooh battery

  I recently did the Vista home premium upgrade on my Satellite M100 (model psmaoa). I installed the Vista drivers as well as by the site "Toshiba Australia and New Zealand", but when I go to install the battery Bluetooth Vista I have blue screen...

  Any help woul appreciated

  Hello

  You update the BIOS?
  On several sets of Toshiba, the update of the BIOS is necessary if you go from XP to Vista or Vista to XP.

  I'm not sure about the Toshiba notebooks for Australian but the European Satellite M100 supports a special BIOS in Vista.
  I recommend you to check this first.

  In addition, I recommend trying to install BT stack from this Toshiba BT Portal;
  http://APS2.toshiba-tro.de/Bluetooth/

  Bye and good luck

• VN7 - 592G blue screen after installed Windows 10 anniversary update

  Hello

  This week I installed the last 10 updated Windows on my laptop VN7 - 592G (tried build 1511 upgrade and clean installation, too), however, I still have the Blue error screen. I can't use my laptop, or to do anything because of the Acer is not kept up-to-date of pilots.

  Of course, I installed the drivers of the last Acer of acer.com but Realtek Audio does not work so my computres crashes at startup.

  ==================================================

  Dump file: 080316-7609 - 01.dmp

  Crash time: 2016. 08 03. 0:18:11

  Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

  Bug check code: 0x1000007e

  Parameter 1: ffffffff "c0000005

  Parameter 2: fffff80e'adc68a41

  Parameter 3: ffffb281'd19376a8

  Parameter 4: ffffb281'd1936ed0

  Caused by the driver: RTKVHD64.sys

  Caused by the address: RTKVHD64.sys + 48 has 41

  Description of the file: Realtek (r) High Definition Audio function driver

  Product name: Realtek (r) High Definition Audio function driver

  Company: Realtek Semiconductor Corp.

  File version: 6.0.1.7687 built by: WinDDK

  CPU: x 64

  Plant address: RTKVHD64.sys + 48 has 41

  Stack address 1:

  The stack address 2:

  Address 3 the battery:

  Computer name:

  Full path: C:\Windows\Minidump\080316-7609-01.dmp

  Number of processors: 8

  Main version: 15

  Minor Version: 14393

  Size of the dump file: 411 988

  File dump: 2016. 08 03. 06:40:05

  ==================================================

  Hi all

  I'm sorry for the delay; first of all, I want to thank you all for your patience as we worked to solve this problem. Second, I have been informed that we had a new audio driver released for the VN7 - 592G, version 6.0.1.7910, and it is now available in the website of drivers and manuals.

• Blue screen after installing the driver for windows phone 7

  Hi all

  I installed the new version of Zune. When I connect my Windows 7 phone (HTC Mozart) to my computer (Vista SP1), the driver will install automatically. After that, he tells me to restart. When I do this, and when windows starts again, theres a BSOD with the following message:
  Driver IRQL not less or equal
  This only happens when I installed the driver for my phone.
  Once windows restarts and gets me to error checking etc and after that, it tries to start Windows again go through the process of "update configuration". Naturally the updates are not properly configured, and it restarts and tries to restore changes. This pretty much goes in a loop forever, until I restart, run in safe mode.
  I have no idea why what is happening, and search on Google did not help so far. Any help would be appreciated.
  Thank you.
  Euler

  The minidump files show the recent errors are errors IRQL_NOT_LESS_OR_EQUAL (a) and the cause of the error is OA001Vid.sys.

  The OA001Ufd.sys also seems to be involved in the accident.

  These two drivers seem to be the drivers for the integrated webcam.

  What you might try is the next update for the webcam to the laptop:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R213648&SystemID=STUDIO1737&servicetag=&os=WLH&osl=en&deviceid=16027&devlib=0&typecnt=0&vercnt=4&catid=-1&impid=-1&formatcnt=0&libid=17&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=302206

• Computer crash - blue screen after installing windows updates

  After you have installed Windows updates waiting on the computer earlier this week, we were not able to get the computer working again.  We were asked to back up and restore the factory settings, which we did.  It instructions update you Windows. When we download the updates it crashes again.  Does anyone know if there is a problem with one of the recent updates that we should avoid so that we our computer working again?

  Hello

  Since you are quite sure this is an update to the source of the problem I want to troubleshoot using this method.

  Control Panel - Windows Updates - upper left settings - set to download but allow you to install them.
  To operate the system and see if there are problems.

  If no problem try to apply updates in small groups or even one at a time, depending on how
  There are many. Beware especially of driver updates that may be older that you have or
  those even incorrect.

  ---------------------------------------------------------------------------------------------------------------

  These can help to solve the problems of update.

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ============================

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen after I updated the video driver windows and windows 7 keep crashing.

  

  Here is the blue screen dump, I can't do system restore, as it has been disabled.

  Please check and suggest what inside this dumps.

  https://onedrive.live.com/redir?RESID=D66A36D9B8E488C7%21956

  Thank you.

  This accident was related to the video or graphics will appear.

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {ffffffffc0000005, fffff880047ac54a, fffff88007bec3c8, fffff88007bebc20}

  Probably caused by: dxgmms1.sys (dxgmms1! VIDMM_DEVICE::RemoveCommitment + 22)

  Follow-up: MachineOwner

  Make sure that your drivers are up-to-date.

  ThinkPad W520

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/ThinkPad-w-series-laptops/ThinkPad-W520