blue screen on the PXI-8106 module: hardware malfunction

Similar Questions

• Satellite P20-771: Error Message blue screen after the reinstallation of the OS

  I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

  As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

  I thank in advance for your help

  Roberto

  Hello

  I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
  Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
  It is not easy to say why the blue screen appears on you laptop.
  Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

• I get a blue screen in the main window to develop the module

  I just downloaded LR6 from CC Adobe on my new computer laptop > it worked fine on the old laptop, but now I have a problem. I imported the photos that look very well, but when I try to open on (one) in the develop module I get a blue screen in the main window.  The image appears in the navigator Panel. I use Windows 10, which I never used before LR.

  Lightroom preferences-> Performance tab, disable the GPU option. It may be necessary to restart Lightroom.

• Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  

  Try to edit > Preferences > Performance and uncheck "use graphics processor.

• Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Disable GPU acceleration. Under preferences-> Performance, clear the check box

• whenever I try to install windows xp I have blue screen with the following error: 0x0000007e

  Original title: blue screen

  Hello

  I have format my laptop and now whenever I try to install windows xp, I get a blue screen with the following text
  error: 0x0000007e (0 x 0000005, 0x808c4de1, 0xf78da150, 0xf78d9e4c).
  I try everything, I remove the memory modules RAM, resetting the bios, etc, nothing works.
  can someone help me?
  Laptop is a toshiba L20-153
  Thanks Joakim

  Hello

  These error messages may be due to hardware problem.

  The methods of troubleshooting provided in the below article might help you.
  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

• On the PXI-8106 serial port connection problem

  Currently, I am trying to connect to the serial port on the PXI-8106 via RS232 module. However, when I try to run the Test VI opened for COM1 MAX (PXI Remote) running on a PC, I received an error like below:

  Returns the status code: 0xBFFF00A8

  Name of the State: VI_ERROR_NPERMISSION

  Access to the resource or the remote machine is denied. This is due to the lack of sufficient privileges for the current user or the machine.

  Right now I'm just a just loopback test to ensure that the interface for device is working before you start my labview code. I'm not sure what the problem is exactly, if it has to do with the PXI or PC. Could you please suggest a few solutions to this topic?

  Thank you.

  I managed to understand. It did not work on the right platform.

• Bose AE2w gives blue screen at the time of the twinning

  Hello Experts,

  When I try to add the bluetooth headset from Bose AE2w on my laptop (Fujitsu S760 windows 7-32 bit) it gives me a blue screen. The problem is that when pairing the headset via bluetooth, the laptop will be begins searching for updates and it ends with a blue screen. I also tried to install the latest driver for the headset but the end upward with the same question. Any idea, and advises on how to solve this problem?

  Hello samira.

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. Are you able to connect other Bluetooth devices?
  3. That you get a blue screen often or is that when you try to connect your Bluetooth headset?

  I suggest you try to plug the Bose AE2W headphones on another computer to rule out the possibility of a bad headphone. The steps I mean generally help diagnose the problem with the help of the automated troubleshooters and move you in the right direction to solve the problem.

  Method 1:

  Run the tool material and devices and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  To control how your computer with Bluetooth devices pairs follow the steps.

  1. Open Control Panel by clicking the Start button, then Control Panel.
  2. In the control panel search box, type Bluetooth, and then click change Bluetooth settings.
  3. In the Bluetooth settings dialog box, click the Options tab and do one of the following:
     Pour rendre make your computer discoverable to Bluetooth devices, select the check box for Allow Bluetooth devices to find this computer.
  4. When a computer active Bluetooth device is in discoverable mode, it broadcasts a wireless signal that allows it to be detected by other Bluetooth compatible computers or devices. This is sometimes called pairing mode.
  5. To allow Bluetooth devices to connect to your computer, select the check box for Allow Bluetooth to connect to this computer devices.

  To be notified when a Bluetooth device is trying to connect to your computer, select the check box for alert me when a new Bluetooth device wants to connect.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Try to change the settings for the Bluetooth compatible device and check.

  Change settings for a Bluetooth compatible device device:
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  You can also check out the link below for troubleshooting

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Method 3:

  In addition to the above methods, I suggest you follow the steps in the section: Bluetooth® troubleshooting in the following link:

  http://worldwide.Bose.com/ProductSupport/en_US/Web/ae2w/page.html

  In addition, if the blue screens are common, please see the following link:

  Resolve stop (blue screen) error in Windows 7

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Note: Make sure that you back up the data before proceeding with the disk check.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• (P50) Blue screen during the BIOS update

  Hello

  I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

  (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

  But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:

  
  Your PC rann in a problem and must restart.
  We are just collection that some info of the error, and then we will restart for you (xx % complete)

  If you want to learn more, you can search online later to this error:

  System_service_exception (TdkLib64.sys)

  A google search gives no results.

  Comment to Moderator: Fixed URL.

  Nice day.

  I'm sorry that I can't help with the problem you are experiencing using updater .exe.

  If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

  I hope this helps a little.

  Kind regards.

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen at the end of Windows Update

  I have Windows updates the value allowing a manual download and install.  Today, when the icon appeared, there were 8 suggested files.  I downloaded and the window open during the installation Setup.  Approximately 98% of the 8th and last update (Malicious Software Removal Tool if they are installed in the order), I got a blue screen.  The machine starts, but the Update icon reappeared, asking to perform the same 8 updates.  I know that most of them have already been installed.  I really hesitate to install again, especially as others have reported may not even start at all their machines after this batch of updates.  What should I do?

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  The following actions could prevent a mistake like this does not happen:

  1 download and install updates for your computer from device drivers [of the manufacturer of the device or computer software download page, not Windows Update!]
  2. scan your computer from computer viruses.
  3. check your hard disk for errors.

  Source & more: http://msdn.microsoft.com/en-us/library/ff559023(v=vs.85).aspx

• reformat and reinstall Windows XP but get the blue screen on the windows configuration page

  I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

  Hello

  1. why you try to reinstall Windows XP?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

  a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

  b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

  c. do not choose the option to press R to use the Recovery Console.

  d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

  e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

  f. follow the instructions on the screen to complete the installation.

  See the following link for more details on the repair facility:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

  http://support.Microsoft.com/kb/978788

  Hope this information is useful.