Blue screen - STOP: 0x0000008E

I got a blue error screen that lists the following information:
Problem: Blue screen
6.0.6002.2.2.2.0.768.3 OS version
Locale 1033 ID
ICC code 1000008e
BCP1 C0000005
81FF03D4 BCP2
BE0C2C5C BCP3
BCP4 00000000
Version of the OS 6-0-6002
Service Pk 2
768-1 product

Files that describe the problem:
C:\Windows\Minidump\Min.011410-01.dmp
C:Users\Owner\AppData\Local\Temp\WER-123833-0.SysData.XML
C:Users\Owner\AppData\Local\Temp\WER14F6.tmp.version.txt

The message said I may not have sufficient disk space and disable BIO memory options and something to do with caching. My battery was insufficient in time, so not that of course that has nothing to do with it. My battery needs to be replaced as well, since it does she take his load for more than 30 minutes. In any case, I don't know what to do or who call for this problem. I run on Windows Vista Edition Home Premium. I've already fried a laptop after 1. 5 years, the current one is 2 years old. I'd appreciate the help. Thank you

Hello

Power problems can cause strange things, however if the system is connected to a/c which should not be a problem.

Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
a pilot just HIDE. Antivirus is another possibility.

See methods of update driver generic in the next message.

BCCode: 8th 0x0000008E is the same as 0x1000008E

Cause

Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

Solve the problem

If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

You can solve the problems of BIOS by upgrading the version of the system BIOS

=============================================

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

It comes to my convenience store generic bluescreen:

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
Displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Satellite 2410-404: blue screen STOP: 0x0000008E TVALD. SYS

    Hello
    last night I tried the WinXP "verifier.exe" tool to check unverified in WinXP drivers.
    My system worked very well until this try. After the first reboot, the system load until the home screen where I choose my account (Administrator rights) to load my profile. After the boot process slows down upwards, only windows processes are shown in the lower right bar (icon of sound system, network) and after a while, there is a blue screen with the following information:

    STOP: 0X0000008E (0XC0000005, 0XF89A742C, 0XF3DFDB50, 0X00000000)
    TVALD. SYS - address F89A742C base at F89A7000, DateStamp 3b7caa6c

    and the system stops.

    Please help how to deal with this error, the tvald.sys is a Toshiba system file in the system32 directory.
    I have the Toshiba recovery cd, but I have half a month of accounting files that is not registered so I need urgently a fix where I do not format the hard drive.

    Thanks for any help
    Alex

    You are right;
    The TVALD. SYS seems to be a Toshiba ACPI-Based value added logical device driver that is required to run the stable notebook.
    It looks like these files has been has not signed with a certificate from a trusted windows source and therefore the tool of Windows XP "verifier.exe" locked or deleted. (I put t know exactly what verifier.exe)

    I put t know if you were able to solve this problem without using the Toshiba Recovery CD :(
    The TVALD. SYS seems to be stored in
    windows\ system32\ drivers\ tvald.sys c:\

    and in the registry here:
    HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-TVALD

    However, in my opinion the verifier.exe tool should be removed and the settings must be reset!
    In this case, you can use the XP System Restore tool!
    That's all I can suggest

  • Error blue screen: STOP: 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED

    original title: blue screen with the error: "STOP: 0x0000008E (0xC000001D, 0 x 82850572, 0x9E204038, 0x00000000)"»

    Hello everyone,

    It has been more than a week I tried to re - install my computer: ACER9802AWKMi after several months of support with blue screen apearing errors whenever there is more than one program open :-(
    So I started with a recovery disk, but the problem was still there.  The computer came with XP Home Edition and I got an upgrade to Vista (all original stuff) with all updates (SP1 and 2 and everything else updates)
    Now, every time I go on the internet: especially no problem, but if I want to play a game (online) full screen, after a few minutes:
    Yes: blue screen with messages such as
    STOP: 0X0000008E (0XC000001D, 0 X 82850572, 0X9E204038, 0X00000000)
    STOP: 0x0000007F (0x00000008, 0x8013F000, 0 x 00000000, 0 x 00000000) or
    PFN_LIST_CORRUPT or
    something with the memory of the BIOS (which I have to remove cache or mirror) witch I tried to do, but not found in the BIOS SetUp (when start PC press F2)

    Whenever I get another message :-(

    I tried with FixIt, fact CHKDSK - CHKDSK F + CHKDSK F R
    I have also run Everest to have all the necessary stuff... so if you need it...

    If anyone has a sollution, I would be very happy to hear it.

    TX much

    In the mean time brands more than 13,000,000 errors:(et toujours obtient plus élevé.)  Of course I'm not every minute in front of my screen (sometimes I work too: the job from 9 to 5, you know)

    Hi Sabine,.

    This means that the RAM is broken or damaged. If you receive error messages, you can stop the execution of memtest86 +.

    Ask someone who knew a little technical to open the laptop and check out how many RAM modules there. If it has a single module, buy a new RAM module.

    If she has more modules, remove other modules, so that you don't have 1 module of RAM left. Now run the test for each RAM module again (only install 1 module at the same time) to check if all are damaged or 1.

    If you have discovered how many RAM modules is broken, buy new RAM

    André

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Blue screen * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    I have a Hewlett-Packard HP ProBook 4510 s 32-bit with Windows 7 Home Premium and a blue screen appears always * STOP: 0x0000008E (0xc0000005, 0x00000000, 0x8BB32B66, 0xB6F93F6C) * iaStor.sys - address 8BB32B66 base at 8BAF1000, Datestamp 4a7c1b38

    Hello

    Check with the help of HP, their online documentation and drivers, diagnostics and ask
    in their forums about known issues with this model.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =======================================================

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ===============================================================

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Two main causes of these blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See the methods of update driver generic and verify the implementation of driver verifier in the next
    Message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

    • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    Make sure you have enough disk space.

    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

    =============================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Blue screen-Stop 0x0000008E (0xC000001D, 0x8204D687, 0x91A8EBDC, 0x00000000)

    Recently had failure of current, and restart, we received the error code: 0x0000008E (0xC000001D, 0x8204D687, 0x91A8EBDC, 0x00000000). The operating system is Windows Vista Home Premium. Any help would be appreciated.

    Edit: There are some important documents and photos that would be essential to preserve.

    Hello

    Data recovery

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method 3 depends on your hardware in the computer that failed

  • Horror of blue screen Stop won't go away

    I get a blue stop screen almost right after I log on my computer. Most of the time I can run only in the Mode without failure. Sometimes, it can be running in normal windows as long as 2 hours. I got a malware infection, (Trojan:Win32 / Alureon.BF), which has been deleted by Microsoft Malicious Software Removal Tool then in Safe Mode and in the normal window. Even after the withdrawal, he goes to blue. But of course when I reboot, the Trojan charging horse, (sometimes after a scan, running in Windows normal, nothing is detected, but still a stop screen finally happens). I can't get rid of this thing. No anti virus or anti spyware software program has never detected this Trojan horse, which is a surprise for me.
    Restoring the system confused me, regarding when to turn on and off after the deletion so the Trojan horse recharge. I tried to install service pack 2 and a few other updates. But all facilities requiring a reboot will not install because of the stop screen. I also believe that some of the files are corrupted.
    I don't have the Vista CD, it came not with this laptop.
    Here are the codes that I get to the Stop screen:
    STOP 0X0000008E (0 X 0000005, 0X8E17405B, 0XAD3D7018, 0X00000000)
    Thanks for any help you can give me.
    Sincerely, lexiy

    Hello

    Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
    View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
    in order to check there. Turn off installation of self as those who are older and it suggests Windows updates
    a pilot just HIDE.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Cause

    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.
    • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the computer has booted with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the computer is started with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    More information on troubleshooting blue screens below.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • A blue screen (Stop error) has been reported. The message contains the error details.

    Hello Hello.
    can someone help me why this error is coming.
    I use a laptop lenovo.
    Error details:
    product-windows stytem, operating
    ID-1003,
    source-system error,
    version - 5.2.
    sysmbolicname-ER_KRNLCRASH_LOG,
    error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1

    A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.

    Concerning

    Chandra Murali

    .net developer,

    HYD.

    Hi Murali,

    ·         What is the random question?

    Try the following.

    Method 1: Check for memory questions

    Microsoft Online Crash Analysis - windiag

    Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.

  • Windows xp blue screen stop: 00000024

    Title: original windows xp blue screen

    had a blue screen with stop:

    Hi steveshepherd,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    (3) what happens when you insert the Windows XP CD?

    You can follow the steps provided by Karena R in the link below, which relate to this issue

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/blue-screen-stop-error-0x00000024-while-booting/196033b0-fbe9-45dd-abbf-889291d0d133

    Kind regards

    Ajay K

  • Blue screen stop: c00002 / a (fatal system error)

    Blue screen stop: c00002 / a (fatal system error)

    the windows login process ended unexpectedly with status 0xc0000005 (0x00000000 0x00000000) the system has been shut down.

    I have dell windows XP home service Pack 3 computer.

    I had a problem with security thinkpoint and called microsoft and after they had me take measures running a couple different scanshttp://live.sunbeltsoftware.com/download VIPRERescue andwww.eset.com virus more microsoft had click me start, run and type in the press temp ok delete all files, run and type prefetch and delete all the files, run %Temp% remove all the files then empty the trash restart and everything should be ok.

    the computer starts fine until I stopped and tried it begins again, same blue screen problem, I went to safe mode and don't start running and temp, prefetch and %Temp% remove empty the Recycle Bin and restart and computer ran fine, after the 2nd screen blue again.

    I'm now working on the computer and if I press start, run make temp, prefetch and % temp % and delete and empty the trash before turn me computer turned off it will start very well, if I don't do the temp, prefetch and %Temp% steps that I will get the blue screen at the start.

    How can I solve this problem and get rid of the blue screen for good message?

    Hi C_O_A_C_H_11,

    Perform the last known good and then restart your computer and check if you receive the error message. You can check the link below:

    How to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • blue screen * STOP 0x0000000A in Windows XP

    blue screen error message: * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) win xp home edition

    Around my house (less than 100 feet I can't use / the view high tower or net - only 'safe mode' whenever I start it (under each variable with or without battery) I get the error message blue screen (see above) - outside of the area of 100 feet, lap top works fine... perfect, starts every time;) HP lap top xp home ed works very well... (I can't use it at home or within 100 feet of my house via especially blue screen message)

    blue screen * STOP 0x0000000A (0xFF1701F0. 0 x 00000002, 0 x 00000000, 0x80536A1C) xp home ed

    You get the following BSOD:

    Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

    This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

    Please download the files dmp from the Windows\Minidump on your Skydrive folder (copy the dmp first on your desktop, otherwise you can not download them) and post a link here, so that we can look at landfills. Perhaps we see the cause.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

    STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

    Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

    Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

    Solution:

    1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

    2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

    3. type: BATCH spuninst.txt

    4. type: exit

    Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

    -Tom Steele
    http://www.hawkandtom.com Tom Steele

  • Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

    I get this on a blue screen stop code and I can't find what this code means someone can help me please v

    00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

    Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
    What you are looking for will be in one of the following categories:

    (a) the BIOS bug
    (b) a pilot whose activity is at the origin of the processor target lock
    (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
    Therefore, check the drivers
    Then check the inside of the species (temperature, voltage, dust, etc.).
    Then run tests of stress of material

    Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
    Try this free stress test: OSS - GIMPS

    CPU Stress Tests:
    Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
    - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
    - http://7byte.com/index.php?page=hotcpu
    - http://www.7byte.com/index.php?page=burnin64
    - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
    - http://www.fossiltoys.com/cpuload.html
    - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
    - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
    - http://majorgeeks.com/CPU_Stability_Test_d215.html
    - http://www.xtremesystems.org/forums/showthread.php?t=201670
    -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

    Then try to replace parts.
    Then look for the version of your BIOS to see what changes have been made.

    Text courtesy of http://www.carrona.org/ Usasma

  • Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)

    Hello

    This is my first post, please have mercy,
    I have a BSD at startup and this is the code that continues to show upward.  System Restore (from system repair and also safe mode) has not solved the teething problems.
    Blue screen STOP: 0 x 00000124 (0x00000000, 0x89BED028, 0xB2000040, 0 x 00000800)
    I think the code means some sort of failure hardware, is anyway to deduce which device has failed in assessing these codes?
    Please let me know if I'm on the wrong track with a hardware failure, I appreciate all the advice.
    Thank you

    Stop 0 x 124 is a hardware error

    If you are overclocking try to reset your settings to standard processor and see if that helps.

    If you keep getting the BSOD here are things more than you may want.

    This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

    Stop 0 x 124 - what it means and what to try
    Synopsis:

    A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.

    Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

    Generic troubleshooting ' Stop 0 x 124 ":

    (1) ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.

    (2) make sure that the machine is sufficiently cooled.
    If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).

    3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
    It is best to run the latest drivers anyway.

    (4) update of the BIOS of the motherboard according to the manufacturer's instructions.
    Their website should provide detailed instructions on the brand and model-specific procedure.

    (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
    At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.

    (6) attempt (stress) test these hardware components that can be put to the test artificially.
    The most obvious examples are the RAM and HDD (s).
    For the RAM, use diagnostics from built-in memory (run MDSCHED) or the utility memtest86 3rd - party to run plenty of evidence of hours of testing.
    For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
    Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.

    (7) as the last troubleshooting no invasive steps, perform a reinstallation of Windows 'vanilla': just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
    Who stops working mitigate the problem of the 0 x 124, jump to the next step.
    If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
    Smash back, obviously the latest addition of software may be somehow connected to the root cause.
    If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
    Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:

    (8) clean and carefully remove the dust inside the machine.
    Reinstall all memory modules and connectors.
    Use a can of compressed air to clean the RAM DIMM supports as much as possible.

    (9) if all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
    Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

    If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

  • service pack 2 Installation error blue screen stop 0 x 0000003

    Hello

    I was unable to download the Update Service Pack 2 on my Windows Vista forever.  Get the message every time I start my computer something like "error on blue screen Stop 0 x 0000003.  When I tried to download the 2 means of redress, both gave me the screens that says 'this update not supported'.  How can I fix it?

    Search for updates of hardware of your computer - including the system BIOS manufacturer.  Do not use all facilities built to perform the check - in fact visit the web page of your computer make & model and update the drivers for your system.

    You can also try this:
    How to reset the Windows Update components?

    (Try first the value default - restart and try your download again.  If this does not work - try the aggressive - restart and try your download again.)

  • Windows 7 - Crash blue screen - STOP: 0X000000F4

    Hi all

    Windows 7 - Crash blue screen - STOP: 0X000000F4

    Screen shows e blue screen will display the following error code:

    STOP: 0X000000F4 (0XFFFFFA800C4C4B10, 0XFFFFFA800C4C4DF0, 0 X 0000000000000003, 0XFFFFF8000418FE20).
    I tried to restore the mode, the safe & all the option available to start properly.  Given that I have no DVD of windows 7 to re - install windows again.
    My question is as follows:
    -Is - error code says something.
    -A way to re - install windows without CD or DVD or save the image.
    -Also, I can read and access data from the C: & D: drive in cmd in restore mode guest mode.
    Waiting for your suggestions.
    concerning
    Jagdish kone

    Blue_Screen_image_.PDF

    Hi Philippe,.

    Thanks for your reply. I want to reinstall windows on the same SSD. Given that the SSD drive works great as external drive.

    So please could you confirm, how do I reinstall windows again. As I see there are recovery drive comes when I use the SSD as external drive.

    Waiting for your suggestions.

    Concerning

    Jagdish

Maybe you are looking for